Visualizing fiber end geometry effects on stress distribution in composites using mechanophores.

Localized stress concentrations at fiber ends in short fiber-reinforced polymer composites (SFRCs) significantly affect their mechanical properties. Our research targets these stress concentrations by embedding nitro-spiropyran (SPN) mechanophores into the polymer matrix. SPN mechanophores change color under mechanical stress, allowing us to visualize and quantify stress distributions at the fiber ends.

Inkjet-printed morphogenesis of tumor-stroma interface using bi-cellular bioinks of collagen-poly(N-isopropyl acrylamide-co-methyl methacrylate) mixture.

Recent advances in biomaterials and 3D printing/culture methods enable various tissue-engineered tumor models. However, it is still challenging to achieve native tumor-like characteristics due to lower cell density than native tissues and prolonged culture duration for maturation. Here, we report a new method to create tumoroids with a mechanically active tumor-stroma interface at extremely high cell density.

Designing Interfacial Reactions for Nanometer-Scale Surface Patterning of PDMS with Controlled Elastic Modulus.

Control over the surface chemistry of elastomers such as polydimethylsiloxane (PDMS) is important for many applications. However, achieving nanostructured chemical control on amorphous material interfaces below the length scale of substrate heterogeneity is not straightforward, and can be particularly difficult to decouple from changes in network structure that are required for certain applications (e.g.

Self-Assembled Asperities for Pressure-Tunable Adhesion.

Control of adhesion is important in a host of applications including soft robotics, pick-and-place manufacturing, wearable devices, and transfer printing. While there are adhesive systems with discrete switchability between states of high and low adhesion, achieving continuously variable adhesion strength remains a challenge. In this work, a pressure-tunable adhesive (PTA) that is based on the self-assembly of stiff microscale asperities on an elastomeric substrate is presented.

Systemic Corticosteroids in the Management of Pediatric Cystic Fibrosis Pulmonary Exacerbations.

Pulmonary exacerbation (PEx) events contribute to lung function decline in people with cystic fibrosis (CF). CF Foundation PEx guidelines note that a short course of systemic corticosteroids may offer benefit without contributing to long-term adverse effects. However, insufficient evidence exists to recommend systemic corticosteroids for PEx treatment.

Activation of Mechanophores in a Thermoset Matrix by Instrumented Scratch.

Scratches in polymer coatings and barrier layers negatively impact optical properties (haze, light transmission, etc.), initiate routes of degradation or corrosion (moisture permeability), and nucleate delamination of the coating. Detecting scratches in coatings on advanced materials systems is an important component of structural health monitoring but can be difficult if the defects are too small to be detected by the naked eye.

Design and validation of a modular micro-robotic system for the mechanical characterization of soft tissues.

The mechanical properties of tissues are critical design parameters for biomaterials and regenerative therapies seeking to restore functionality after disease or injury. Characterizing the mechanical properties of native tissues and extracellular matrix throughout embryonic development helps us understand the microenvironments that promote growth and remodeling, activities critical for biomaterials to support. The mechanical characterization of small, soft materials like the embryonic tissues of the mouse, an established mammalian model for development, is challenging due to difficulties in handling minute geometries and resolving forces of low magnitude.

Pressure tunable adhesion of rough elastomers.

The ability to control adhesion is critical in various technologies including wearable electronics, pressure sensitive adhesives, and robotic systems. Biomimetic fibrillar structures, random surface roughness, and chemical surface treatments have been employed to modify the adhesion energy of materials used in these applications. However, polymer thin film dewetting has not been investigated as a surface modification tool to control adhesion.

An engineer's introduction to mechanophores.

Mechanophores (MPs) are a class of stimuli-responsive materials that are of increasing interest to engineers due to their potential applications as stress sensors. These mechanically responsive molecules change color or become fluorescent upon application of a mechanical stimulus as they undergo a chemical reaction when a load is applied. By incorporating MPs such as spirolactam, spiropyran, or dianthracene into a material system, the real-time stress distribution of the matrix can be directly observed through a visual response, ideal for damage and failure sensing applications.

Polymer thin film adhesion utilizing the transition from surface wrinkling to delamination.

Understanding the adhesion of rigid thin films to compliant substrates is critical for the development and implementation of flexible electronic devices and wearable sensor technologies. Quantifying the strength of a film-substrate interface can be challenging due to the brittleness of glassy films which can greatly complicate sample preparation, handling, and testing. Here, a method for measuring the adhesion of glassy thin films to soft elastomeric substrates is explored that exploits an understanding of surface buckling instabilities, specifically the transition from wrinkling to delamination.

Extrinsic and Dynamic Edge States of Two-Dimensional Lead Halide Perovskites.

Edges of two-dimensional (2D) halide perovskites are found to exhibit unusual properties such as enhanced photoluminescence lifetime and reduced photoluminescence emission energy. Here, we report the formation mechanism and the dynamic nature of edge states on exfoliated 2D halide perovskite thin crystals. In contrast to other 2D materials, the edge states in 2D perovskites are extrinsic and can be triggered by moisture with a concentration as low as ∼0.

Mechanical strength of welding zones produced by material extrusion additive manufacturing.

As more manufacturing processes and research institutions adopt customized manufacturing as a key element in their design strategies and finished products, the resulting mechanical properties of parts produced through additive manufacturing (AM) must be characterized and understood. In material extrusion (MatEx), the most recently extruded polymer filament must bond to the previously extruded filament via polymer diffusion to form a "weld". The strength of the weld limits the performance of the manufactured part and is controlled through processing conditions.

Wrinkling-to-delamination transition in thin polymer films on compliant substrates.

Compressing a thin, stiff film attached to a thick, compliant substrate can lead to a number of different modes of mechanical deformation depending upon the material properties of the system. In this article we explore direct transitions from surface wrinkling to buckle delamination, and provide a theoretical framework for understanding the conditions under which such transitions take place, as well as the resulting dimensions of the wrinkling-induced delamination. A key conclusion of this work is that the width of the delamination blister formed from a wrinkled film is relatively strain-independent, suggesting that delaminations can be used in such systems to measure the adhesion energy at the film-substrate interface.

Weld formation during material extrusion additive manufacturing.

Material extrusion (ME) is a layer-by-layer additive manufacturing process that is now used in personal and commercial production where prototyping and customization are required. However, parts produced from ME frequently exhibit poor mechanical performance relative to those from traditional means; moreover, fundamental knowledge of the factors leading to development of inter-layer strength in this highly non-isothermal process is limited. In this work, we seek to understand the development of inter-layer weld strength from the perspective of polymer interdiffusion under conditions of rapidly changing mobility.

Observation of interfacial damage in a silk-epoxy composite, using a simple mechanoresponsive fluorescent probe.

Polymer composite materials are found throughout the world both natural and artificial in origin. In the vast majority of applications in these arenas, composites serve as structural support or reinforcement. Demand for lightweight tough composites is growing in multiple application spaces such as aerospace, biomaterials, and infrastructure with physical properties as diverse as the applications.

Simultaneously Tailoring Surface Energies and Thermal Stabilities of Cellulose Nanocrystals Using Ion Exchange: Effects on Polymer Composite Properties for Transportation, Infrastructure, and Renewable Energy Applications.

Cellulose nanocrystals (CNCs) have great potential as sustainable reinforcing materials for polymers, but there are a number of obstacles to commercialization that must first be overcome. High levels of water absorption, low thermal stabilities, poor miscibility with nonpolar polymers, and irreversible aggregation of the dried CNCs are among the greatest challenges to producing cellulose nanocrystal-polymer nanocomposites. A simple, scalable technique to modify sulfated cellulose nanocrystals (Na-CNCs) has been developed to address all of these issues.

Debonding mechanisms of soft materials at short contact times.

A carefully controlled, custom-built adhesion testing device was developed which allows a precise, short dwell time on the order of milliseconds to be applied during a contact adhesion experiment. The dwell time dependence of the adhesive strength of crosslinked poly(dimethylsiloxane) (PDMS) in contact with glass and uncrosslinked styrene butadiene rubber (SBR) in contact with glass and with itself was tested with a spherical probe in a confined Johnson-Kendall-Roberts (JKR) geometry. Analysis of the contact images revealed several unique separation mechanisms which are dependent on dwell time and interfacial properties.

Enhanced adhesion of elastic materials to small-scale wrinkles.

The adhesive properties of a material can be greatly affected simply by wrinkling its surface. We show the importance of selecting the wrinkle feature sizes (amplitude, b; and wavelength, λ) that complement the material-defined length scale related to the adhesion energy and modulus. A rigid circular cylindrical punch patterned with aligned wrinkles ranging in amplitude from 0.