Life cycle assessment and life cycle cost analysis of anion exchange and granular activated carbon systems for remediation of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs).

Anion exchange resin (AER) and granular activated carbon (GAC) have emerged as prominent technologies for treatment of waters contaminated with per- and polyfluoroalkyl substances (PFASs). This study compares the life cycle environmental impacts and life cycle costs of remediating PFAS-contaminated groundwater with these competing technologies, using field pilot data to inform model inputs. Comparative analysis indicates that AER systems employing single-use "PFAS-selective" resins have lower environmental impacts and costs than systems using regenerable resins or GAC adsorbents, supporting its use in future remediation efforts.

PFAS adsorbent selection: The role of adsorbent use rate, water quality, and cost.

Per- and polyfluoroalkyl substance (PFAS) contamination in aqueous matrices has intensified the search for PFAS adsorbents with elevated capacity, selectivity, and cost effectiveness. A novel surface modified organoclay (SMC) adsorbent was evaluated for PFAS removal performance in parallel with granular activated carbon (GAC) and ion exchange resin (IX) for the treatment of five distinct PFAS impaired waters including groundwater, landfill leachate, membrane concentrate and wastewater effluent. Rapid small scale column tests (RSSCTs) and breakthrough modeling were coupled to provide insight on adsorbent performance and cost for multiple PFAS and water types.

Pilot study comparison of regenerable and emerging single-use anion exchange resins for treatment of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs).

This study reports the results of an 8-month pilot study comparing both regenerable and emerging single-use anion exchange resins (AERs) for treatment of per- and polyfluoroalkyl substances (PFASs) at a source zone impacted by historical use of aqueous film-forming foam (AFFF). Two regenerable (Purolite A860 and A520E) and three single-use (Purolite PFA694E, Calgon CalRes 2301, and Dowex PSR2+) AERs were tested in parallel, collecting effluent samples after treatment for 30-sec and 2-min total empty bed contact time (EBCT). Results demonstrate that single-use AERs significantly outperform regenerable resins, particularly for treatment of long-chain perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs).

Pilot-scale field demonstration of a hybrid nanofiltration and UV-sulfite treatment train for groundwater contaminated by per- and polyfluoroalkyl substances (PFASs).

Previous laboratory scale studies indicate nanofiltration (NF) and UV-sulfite photochemical treatments as promising technologies for the removal and destruction, respectively, of per- and polyfluoroalkyl substances (PFASs) from contaminated water. This study reports on a field demonstration of a pilot-scale hybrid NF and UV-sulfite treatment train for the remediation of 12 PFASs detected in groundwater impacted by aqueous film-forming foam (AFFF) at a U.S.

Rejection of per- and polyfluoroalkyl substances (PFASs) in aqueous film-forming foam by high-pressure membranes.

The ubiquitous use and manufacturing of per- and polyfluoroalkyl substances (PFASs) have led to the contamination of water resources worldwide. High-pressure membranes, including nanofiltration (NF) and reverse osmosis (RO), are increasingly being deployed for water treatment and may be an effective barrier to PFASs. However, the impact of membrane operating conditions, background water matrix, and solute adsorption on rejection of diverse PFASs by NF and RO remains unclear.