Responsive blends of block copolymers stabilize the hexagonally perforated lamellae morphology.

Blends of block copolymers can form phases and exhibit features distinct from the constituent materials. We study thin film blends of cylinder-forming and lamellar-forming block copolymers across a range of substrate surface energies. Blend materials are responsive to interfacial energy, allowing selection of pure or coexisting phases based on surface chemistry.

Porosity Development at Li-Rich Layered Cathodes in All-Solid-State Battery during Delithiation.

Structural evolutions are crucial for determining the performance of high-voltage lithium, manganese-rich layered cathodes. Moreover, interface between electrode and electrolyte plays a critical role in governing ionic transfer in all-solid-state batteries. Here, we unveil two different types of porous structure in LiNiMnO cathode with LiPON solid-state electrolyte.

Thin-film synthesis of superconductor-on-insulator A15 vanadium silicide.

We present a new method for thin-film synthesis of the superconducting A15 phase of vanadium silicide with critical temperature higher than 13 K. Interdiffusion between a metallic vanadium film and the underlying silicon device layer in a silicon-on-insulator substrate, at temperatures between 650 and 750 °C, favors formation of the vanadium-rich A15 phase by limiting the supply of available silicon for the reaction. Energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction verify the stoichiometry and structure of the synthesized thin films.

Modulating T Cell Activation Using Depth Sensing Topographic Cues.

This report examines how sensing of substrate topography can be used to modulate T cell activation, a key coordinating step in the adaptive immune response. Inspired by the native T cell-antigen presenting cell interface, micrometer scale pits with varying depth are fabricated into planar substrates. Primary CD4 T cells extend actin-rich protrusions into the micropits.

Nanoscale viscosity of confined polyethylene oxide.

Complex fluids near interfaces or confined within nanoscale volumes can exhibit substantial shifts in physical properties compared to bulk, including glass transition temperature, phase separation, and crystallization. Because studies of these effects typically use thin film samples with one dimension of confinement, it is generally unclear how more extreme spatial confinement may influence these properties. In this work, we used x-ray photon correlation spectroscopy and gold nanoprobes to characterize polyethylene oxide confined by nanostructured gratings (<100nm width) and measured the viscosity in this nanoconfinement regime to be ∼500 times the bulk viscosity.

T cell activation and immune synapse organization respond to the microscale mechanics of structured surfaces.

Cells have the remarkable ability to sense the mechanical stiffness of their surroundings. This has been studied extensively in the context of cells interacting with planar surfaces, a conceptually elegant model that also has application in biomaterial design. However, physiological interfaces are spatially complex, exhibiting topographical features that are described over multiple scales.

Top-down fabrication of high-uniformity nanodiamonds by self-assembled block copolymer masks.

Nanodiamonds hosting colour centres are a promising material platform for various quantum technologies. The fabrication of non-aggregated and uniformly-sized nanodiamonds with systematic integration of single quantum emitters has so far been lacking. Here, we present a top-down fabrication method to produce 30.

Interfacial actin protrusions mechanically enhance killing by cytotoxic T cells.

Cytotoxic T lymphocytes (CTLs) kill by forming immunological synapses with target cells and secreting toxic proteases and the pore-forming protein perforin into the intercellular space. Immunological synapses are highly dynamic structures that boost perforin activity by applying mechanical force against the target cell. Here, we used high-resolution imaging and microfabrication to investigate how CTLs exert synaptic forces and coordinate their mechanical output with perforin secretion.

Single-Digit Nanometer Electron-Beam Lithography with an Aberration-Corrected Scanning Transmission Electron Microscope.

We demonstrate extension of electron-beam lithography using conventional resists and pattern transfer processes to single-digit nanometer dimensions by employing an aberration-corrected scanning transmission electron microscope as the exposure tool. Here, we present results of single-digit nanometer patterning of two widely used electron-beam resists: poly (methyl methacrylate) and hydrogen silsesquioxane. The method achieves sub-5 nanometer features in poly (methyl methacrylate) and sub-10 nanometer resolution in hydrogen silsesquioxane.

Aberration-Corrected Electron Beam Lithography at the One Nanometer Length Scale.

Patterning materials efficiently at the smallest length scales is a longstanding challenge in nanotechnology. Electron-beam lithography (EBL) is the primary method for patterning arbitrary features, but EBL has not reliably provided sub-4 nm patterns. The few competing techniques that have achieved this resolution are orders of magnitude slower than EBL.

Thickness-dependence of block copolymer coarsening kinetics.

Despite active research, many fundamental aspects of block copolymer ordering remain unresolved. We studied the thickness-dependence of block copolymer grain coarsening kinetics, and find that thinner films order more rapidly than thicker films. Bilayer films, or monolayers with partial layers of islands, order more slowly than monolayers because of the greater amount of material that must rearrange in a coordinated fashion.

Probing Synaptic Biomechanics Using Micropillar Arrays.

Recent insights into the importance of mechanosensing and force transmission at the immune synapse have spurred increased interest in the mechanical properties of leukocyte cell-cell interactions. In this chapter, we describe an imaging-based strategy for measuring cellular forces that utilizes optically transparent arrays of flexible micropillars. This approach has several distinct advantages over standard traction force microscopy, and we anticipate that it will prove very useful for investigators who wish not only to quantify ligand-induced forces with high spatiotemporal resolution but also to place those forces within the context of a broader cell biological response.

Non-native three-dimensional block copolymer morphologies.

Self-assembly is a powerful paradigm, wherein molecules spontaneously form ordered phases exhibiting well-defined nanoscale periodicity and shapes. However, the inherent energy-minimization aspect of self-assembly yields a very limited set of morphologies, such as lamellae or hexagonally packed cylinders. Here, we show how soft self-assembling materials-block copolymer thin films-can be manipulated to form a diverse library of previously unreported morphologies.

Patterning at the 10 nanometer length scale using a strongly segregating block copolymer thin film and vapor phase infiltration of inorganic precursors.

In this work, we demonstrate the use of self-assembled thin films of the cylinder-forming block copolymer poly(4-tert-butylstyrene-block-2-vinylpyridine) to pattern high density features at the 10 nm length scale. This material's large interaction parameter facilitates pattern formation in single-digit nanometer dimensions. This block copolymer's accessible order-disorder transition temperature allows thermal annealing to drive the assembly of ordered 2-vinylpyridine cylinders that can be selectively complexed with the organometallic precursor trimethylaluminum.

Wettability of partially suspended graphene.

The dependence of the wettability of graphene on the nature of the underlying substrate remains only partially understood. Here, we systematically investigate the role of liquid-substrate interactions on the wettability of graphene by varying the area fraction of suspended graphene from 0 to 95% by means of nanotextured substrates. We find that completely suspended graphene exhibits the highest water contact angle (85° ± 5°) compared to partially suspended or supported graphene, regardless of the hydrophobicity (hydrophilicity) of the substrate.

Elastic Properties of Protein Functionalized Nanoporous Polymer Films.

Retaining the conformational structure and bioactivity of immobilized proteins is important for biosensor designs and drug delivery systems. Confined environments often lead to changes in conformation and functions of proteins. In this study, lysozyme is chemically tethered into nanopores of polystyrene thin films, and submicron pores in poly(methyl methacrylate) films are functionalized with streptavidin.

Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells.

Despite numerous organic semiconducting materials synthesized for organic photovoltaics in the past decade, fullerenes are widely used as electron acceptors in highly efficient bulk-heterojunction solar cells. None of the non-fullerene bulk heterojunction solar cells have achieved efficiencies as high as fullerene-based solar cells. Design principles for fullerene-free acceptors remain unclear in the field.

Arbitrary lattice symmetries via block copolymer nanomeshes.

Self-assembly of block copolymers is a powerful motif for spontaneously forming well-defined nanostructures over macroscopic areas. Yet, the inherent energy minimization criteria of self-assembly give rise to a limited library of structures; diblock copolymers naturally form spheres on a cubic lattice, hexagonally packed cylinders and alternating lamellae. Here, we demonstrate multicomponent nanomeshes with any desired lattice symmetry.

Sub-50-nm self-assembled nanotextures for enhanced broadband antireflection in silicon solar cells.

Materials providing broadband light antireflection have applications as highly transparent window coatings, military camouflage, and coatings for efficiently coupling light into solar cells and out of light-emitting diodes. In this work, densely packed silicon nanotextures with feature sizes smaller than 50 nm enhance the broadband antireflection compared with that predicted by their geometry alone. A significant fraction of the nanotexture volume comprises a surface layer whose optical properties differ substantially from those of the bulk, providing the key to improved performance.

Quantifying bulk and surface recombination processes in nanostructured water splitting photocatalysts via in situ ultrafast spectroscopy.

A quantitative description of recombination processes in nanostructured semiconductor photocatalysts-one that distinguishes between bulk (charge transport) and surface (chemical reaction) losses-is critical for advancing solar-to-fuel technologies. Here we present an in situ experimental framework that determines the bias-dependent quantum yield for ultrafast carrier transport to the reactive interface. This is achieved by simultaneously measuring the electrical characteristics and the subpicosecond charge dynamics of a heterostructured photoanode in a working photoelectrochemical cell.

Air-liquid interfacial self-assembly of conjugated block copolymers into ordered nanowire arrays.

The ability to control the molecular packing and nanoscale morphology of conjugated polymers is important for many of their applications. Here, we report the fabrication of well-ordered nanoarrays of conjugated polymers, based on the self-assembly of conjugated block copolymers at the air-liquid interface. We demonstrate that the self-assembly of poly(3-hexylthiophene)-block-poly(ethylene glycol) (P3HT-b-PEG) at the air-water interface leads to large-area free-standing films of well-aligned P3HT nanowires.

Self-assembled phases of block copolymer blend thin films.

The patterns formed by self-assembled thin films of blended cylindrical and lamellar polystyrene-b-poly(methyl methacrylate) block copolymers can be either a spatially uniform, single type of nanostructure or separate, coexisting regions of cylinders and lamellae, depending on fractional composition and molecular weight ratio of the blend constituents. In blends of block copolymers with different molecular weights, the morphology of the smaller molecular weight component more strongly dictates the resulting pattern. Although molecular scale chain mixing distorts microdomain characteristic length scales from those of the pure components, even coexisting morphologies exhibit the same domain spacing.

Nanostructured surfaces frustrate polymer semiconductor molecular orientation.

Nanostructured grating surfaces with groove widths less than 200 nm impose boundary conditions that frustrate the natural molecular orientational ordering within thin films of blended polymer semiconductor poly(3-hexlythiophene) and phenyl-C61-butyric acid methyl ester, as revealed by grazing incidence X-ray scattering measurements. Polymer interactions with the grating sidewall strongly inhibit the polymer lamellar alignment parallel to the substrate typically found in planar films, in favor of alignment perpendicular to this orientation, resulting in a preferred equilibrium molecular configuration difficult to achieve by other means. Grating surfaces reduce the relative population of the parallel orientation from 30% to less than 5% in a 400 nm thick film.