STANDARD REFERENCE MATERIALS FOR THE POLYMERS INDUSTRY.

The National Institute of Standards and Technology (NIST) provides science, industry, and government with a central source of well-characterized materials certified for chemical composition or for some chemical or physical property. These materials are designated Standard Reference Materials (SRMs) and are used to calibrate measuring instruments, to evaluate methods and systems, or to produce scientific data that can be referred readily to a common base. In this paper, we discuss the history of polymer based SRMs, their current status, and challenges and opportunities to develop new standards to address industrial measurement challenges.

Exact solution of the thermodynamics and size parameters of a polymer confined to a lattice of finite size: large chain limit.

We extend the exact solutions of the Di Marzio-Rubin matrix method for the thermodynamic properties, including chain density, of a linear polymer molecule confined to walk on a lattice of finite size. Our extensions enable (a) the use of higher dimensions (explicit 2D and 3D lattices), (b) lattice boundaries of arbitrary shape, and (c) the flexibility to allow each monomer to have its own energy of attraction for each lattice site. In the case of the large chain limit, we demonstrate how periodic boundary conditions can also be employed to reduce computation time.

Continuous flow enzyme-catalyzed polymerization in a microreactor.

Enzymes immobilized on solid supports are increasingly used for greener, more sustainable chemical transformation processes. Here, we used microreactors to study enzyme-catalyzed ring-opening polymerization of ε-caprolactone to polycaprolactone. A novel microreactor design enabled us to perform these heterogeneous reactions in continuous mode, in organic media, and at elevated temperatures.

Adhesive Bonding to Dentin Improved by Polymerizable Cyclodextrin Derivatives.

The objective of this work was to determine bonding characteristics of a hydrophilic monomer formulation containing polymerizable cyclodextrin derivatives. The hypothesis was that a formulation containing hydrophilic cross-linking diluent comonomers and cyclodextrins with functional groups attached by hydrolytically stable ether linkages could form strong adhesive bonds to dentin. The previously synthesized polymerizable cyclodextrin derivatives were formulated with sorbitol dimethacrylate, methacrylic acid and phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide photoinitiator.

Synthesis of Polymerizable Cyclodextrin Derivatives for Use in Adhesion-Promoting Monomer Formulations.

The synthesis of the cyclodextrin derivatives reported herein was assisted by extensive literature research together with structure-property relationships derived from three-dimensional molecular modeling. These studies led to the hypothesis that many of the 21 hydroxyl groups on beta-cyclodextrin molecules could be derivatized to form a closely related family of analogous chemical compounds containing both polymerizable groups and hydrophilic ionizable ligand (substrate-binding) groups, each attached via hydrolytically-stable ether-linkages. The vinylbenzylether polymerizable groups should readily homopolymerize and also copolymerize with methacrylates.

Significant parameters in the optimization of MALDI-TOF-MS for synthetic polymers.

One of the most significant issues in any analytical practice is optimization. Optimization and calibration are key factors in quantitation. In matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), instrument optimization is a limitation restricting quantitation.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry interlaboratory comparison of mixtures of polystyrene with different end groups: statistical analysis of mass fractions and mass moments.

A matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) interlaboratory comparison was conducted on mixtures of synthetic polymers having the same repeat unit and closely matching molecular mass distributions but with different end groups. The interlaboratory comparison was designed to see how well the results from a group of experienced laboratories would agree on the mass fraction, and molecular mass distribution, of each polymer in a series of binary mixtures. Polystyrenes of a molecular mass near 9000 u were used.

The influence of electrospray deposition in matrix-assisted laser desorption/ionization mass spectrometry sample preparation for synthetic polymers.

Although electrospray sample deposition in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) sample preparation increases the repeatability of both the MALDI signal intensity and the measured molecular mass distribution (MMD), the electrospray sample deposition method may influence the apparent MMD of a synthetic polymer. The MMDs of three polymers of differing thermal stability, polystyrene (PS), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG), were studied by MALDI time-of-flight (TOF) MS as the electrospray deposition voltage was varied. The MMDs obtained using the electrospray deposition method were compared with those obtained for hand-spotted samples.

An operator-independent approach to mass spectral peak identification and integration.

A mathematical algorithm is presented that locates and calculates the area beneath peaks from real data using only reproducible mathematical operations and no user-selected parameters. It makes no assumptions about peak shape and requires no smoothing or preprocessing of the data. In fact, it is shown that for matrix-assisted laser desorption time-of-flight mass spectra noise exists at all frequency ranges making the smoothing of data without distortion of peak areas impossible.

Investigations of electrospray sample deposition for polymer MALDI mass spectrometry.

In the interest of a more thorough understanding of the relationship between sample deposition technique and the quality of data obtained using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry, details of the electrospray (ES) process of sample deposition are investigated using a number of techniques. Sample morphology was observed with scanning electron microscopy (SEM) and atomic force microscopy (AFM), while matrix-enhanced secondary ion mass spectrometry (MESIMS) monitored surface coverage. Electrospray deposition reduces the analyte segregation that can occur during traditional dried droplet deposition for MALDI.

Molecular mass determination of saturated hydrocarbons: reactivity of eta5-cyclopentadienylcobalt ion (CpCo*+) and linear alkanes up to C-30.

The present study demonstrates the feasibility of the eta5-cyclopentadienylcobalt ion (CpCo*+) as a suitable cationization reagent for saturated hydrocarbon analysis by mass spectrometry. Ion/molecule reactions of CpCo*+ and three medium chain-length n-alkanes were examined using Fourier-transform ion cyclotron resonance mass spectrometry. Second-order rate constants and reaction efficiencies were determined for the reactions studied.

Metal powder substrate-assisted laser desorption/ionization mass spectrometry for polyethylene analysis.

Polyethylene is one of the most important industrial polymers and is also one of the most challenging polymers to be characterized by mass spectrometry. We have developed a substrate-assisted laser desorption/ionization (LDI) mass spectrometric method for polyethylene analysis. In this method, cobalt, copper, nickel, or iron metal powders are used as a sample substrate and silver nitrate is used as the cationization reagent.

Small angle neutron scattering measurements of synthetic polymer dispersions in matrix-assisted laser desorption/ionization matrixes.

Small angle neutron scattering (SANS) is used to measure the size and the dispersion of synthetic polymers in matrix-assisted laser desorption/ionization (MALDI) matrixes. Deuterated polystyrene (DPS) and dithranol in tetrahydrofuran were deposited by electrospray onto a substrate for small angle neutron scattering (SANS) measurements. DPS with 6050 and 27,000 g mol(-1) molecular masses were prepared at mass fractions between 0.

Tri-alpha-naphthylbenzene as a crystalline or glassy matrix for matrix-assisted laser desorption/ionization: a model system for the study of effects of dispersion of polymer samples at a molecular level.

Tri-alpha-naphthylbenzene (TalphaNB) can exist as either a crystalline or glassy solid at ambient temperatures, making it a unique matrix in matrix-assisted laser desorption/ionization (MALDI) spectroscopy. Electrosprayed TalphaNB is crystalline and has a melting point of 180 +/- 2 degrees C, as measured by differential scanning calorimetry (DSC). A glass of TalphaNB is obtained upon heating above the crystalline melting point with a glass transition temperature of 68 +/- 2 degrees C having no remaining crystallinity.

Data Analysis Methods for Synthetic Polymer Mass Spectrometry: Autocorrelation.

Autocorrelation is shown to be useful in describing the periodic patterns found in high- resolution mass spectra of synthetic polymers. Examples of this usefulness are described for a simple linear homopolymer to demonstrate the method fundamentals, a condensation polymer to demonstrate its utility in understanding complex spectra with multiple repeating patterns on different mass scales, and a condensation copolymer to demonstrate how it can elegantly and efficiently reveal unexpected phenomena. It is shown that using autocorrelation to determine where the signal devolves into noise can be useful in determining molecular mass distributions of synthetic polymers, a primary focus of the NIST synthetic polymer mass spectrometry effort.