Synthesis and Stability of High-Energy-Density Niobium Nitrides under High-Pressure Conditions.

High-energy-density materials (HEDMs) are crucial in various applications, from energy storage to defense technologies. Transition metal polynitrides are promising candidates for HEDMs. Using single-crystal synchrotron X-ray diffraction, we investigated the crystal structures of niobium nitride, specifically NbN and NbN, under high-pressure conditions of up to 86 GPa.

Long-term relaxation of orientational disorder and structural modifications in molecular nitrogen at high pressure.

Up to 17 GPa, the crystalline phases of N2 are characterized by pronounced orientational disorder, whereas the higher-pressure phases of molecular N2 are ordered. This raises the question about long-term relaxation of orientational disorder within the low- to intermediate-pressure regime. Here, this question is addressed by comparing synthetic with natural, chemically pure, solid N2 that resides as inclusions in diamonds at 300 K for about 108 years at pressures up to 11 GPa.

Phase transition kinetics of superionic HO ice phases revealed by Megahertz X-ray free-electron laser-heating experiments.

HO transforms to two forms of superionic (SI) ice at high pressures and temperatures, which contain highly mobile protons within a solid oxygen sublattice. Yet the stability field of both phases remains debated. Here, we present the results of an ultrafast X-ray heating study utilizing MHz pulse trains produced by the European X-ray Free Electron Laser to create high temperature states of HO, which were probed using X-ray diffraction during dynamic cooling.

A Sodium Germanosilicide with Unusual Network Topology.

The germanosilicide NaGeSi (0.4 ≤ ≤ 1.1, 4.

High-Pressure 16-YBr Polymorph Recoverable to Ambient Conditions: From 3D Framework to Layered Material.

Exfoliation of graphite and the discovery of the unique properties of graphene─graphite's single layer─have raised significant attention to layered compounds as potential precursors to 2D materials with applications in optoelectronics, spintronics, sensors, and solar cells. In this work, a new orthorhombic polymorph of yttrium bromide, 16-YBr was synthesized from yttrium and CBr in a laser-heated diamond anvil cell at 45 GPa and 3000 K. The structure of 16-YBr was solved and refined using in situ synchrotron single-crystal X-ray diffraction.

Compressibility Studies of Copper Selenides Obtained by Cation Exchange Reaction Revealing the New CsCl Phase.

In this study, we conducted a high-pressure investigation of CuSe nanostructures with pyramid- and plate-like morphologies, created through cation exchange from zinc-blende CdSe nanocrystals and wurtzite CdSe nanoplatelets respectively. Using a diamond anvil cell setup at the APS synchrotron, we observed the phase transitions in the CuSe nanostructures up to 40 GPa, identifying a novel CsCl-type lattice with 3̅ symmetry above 4 GPa. This CsCl-type structure, previously unreported in copper selenides, was partially retained after decompression.

Exploring toroidal anvil profiles for larger sample volumes above 4 Mbar.

With the advent of toroidal and double-stage diamond anvil cells (DACs), pressures between 4 and 10 Mbar can be achieved under static compression, however, the ability to explore diverse sample assemblies is limited on these micron-scale anvils. Adapting the toroidal DAC to support larger sample volumes offers expanded capabilities in physics, chemistry, and planetary science: including, characterizing materials in soft pressure media to multi-megabar pressures, synthesizing novel phases, and probing planetary assemblages at the interior pressures and temperatures of super-Earths and sub-Neptunes. Here we have continued the exploration of larger toroidal DAC profiles by iteratively testing various torus and shoulder depths with central culet diameters in the 30-50 µm range.

High-pressure high-temperature synthesis of NdRe.

In this study, we report the synthesis of a new cubic neodymium-rhenium metallic alloy NdRe through the utilization of high pressure and laser heating in a diamond anvil cell. NdRe crystallizes in the space group with a lattice parameter equal to 7.486 (2) Å and Z = 8 at 24 (1) GPa and 2,200 (100) K.

Extending carbon chemistry at high-pressure by synthesis of CaC and CaC with deprotonated polyacene- and para-poly(indenoindene)-like nanoribbons.

Metal carbides are known to contain small carbon units similar to those found in the molecules of methane, acetylene, and allene. However, for numerous binary systems ab initio calculations predict the formation of unusual metal carbides with exotic polycarbon units, [C] rings, and graphitic carbon sheets at high pressure (HP). Here we report the synthesis and structural characterization of a HP-CaC polymorph and a CaC compound featuring deprotonated polyacene-like and para-poly(indenoindene)-like nanoribbons, respectively.

High-pressure Synthesis of Cobalt Polynitrides: Unveiling Intriguing Crystal Structures and Nitridation Behavior.

In this study, we conduct extensive high-pressure experiments to investigate phase stability in the cobalt-nitrogen system. Through a combination of synthesis in a laser-heated diamond anvil cell, first-principles calculations, Raman spectroscopy, and single-crystal X-ray diffraction, we establish the stability fields of known high-pressure phases, hexagonal NiAs-type CoN, and marcasite-type CoN within the pressure range of 50-90 GPa. We synthesize and characterize previously unknown nitrides, CoN, Pnma-CoN and two polynitrides, CoN and CoN, within the pressure range of 90-120 GPa.

Diverse high-pressure chemistry in Y-NHBH and Y-paraffin oil systems.

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors-ammonia borane or paraffin oil.

Stabilization of N and N anionic units and 2D polynitrogen layers in high-pressure scandium polynitrides.

Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, ScN, ScN, ScN and ScN, synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells.

Pressure-Induced Amidine Formation via Side-Chain Polymerization in a Charge-Transfer Cocrystal.

Compression of small molecules can induce solid-state reactions that are difficult or impossible under conventional, solution-phase conditions. Of particular interest is the topochemical-like reaction of arenes to produce polymeric nanomaterials. However, high reaction onset pressures and poor selectivity remain significant challenges.

Stability of hydrides in sub-Neptune exoplanets with thick hydrogen-rich atmospheres.

Many sub-Neptune exoplanets have been believed to be composed of a thick hydrogen-dominated atmosphere and a high-temperature heavier-element-dominant core. From an assumption that there is no chemical reaction between hydrogen and silicates/metals at the atmosphere-interior boundary, the cores of sub-Neptunes have been modeled with molten silicates and metals (magma) in previous studies. In large sub-Neptunes, pressure at the atmosphere-magma boundary can reach tens of gigapascals where hydrogen is a dense liquid.

Externally Heated Diamond ANvil Cell Experimentation (EH-DANCE) for studying materials and processes under extreme conditions.

Externally heated diamond anvil cells provide a stable and uniform thermal environment, making them a versatile device to simultaneously generate high-pressure and high-temperature conditions in various fields of research, such as condensed matter physics, materials science, chemistry, and geosciences. The present study features the Externally Heated Diamond ANvil Cell Experimentation (EH-DANCE) system, a versatile configuration consisting of a diamond anvil cell with a customized microheater for stable resistive heating, bidirectional pressure control facilitated by compression and decompression membranes, and a water-cooled enclosure suitable for vacuum and controlled atmospheres. This integrated system excels with its precise control of both pressure and temperature for mineral and materials science research under extreme conditions.

Melting and defect transitions in FeO up to pressures of Earth's core-mantle boundary.

The high-pressure melting curve of FeO controls key aspects of Earth's deep interior and the evolution of rocky planets more broadly. However, existing melting studies on wüstite were conducted across a limited pressure range and exhibit substantial disagreement. Here we use an in-situ dual-technique approach that combines a suite of >1000 x-ray diffraction and synchrotron Mössbauer measurements to report the melting curve for FeO wüstite to pressures of Earth's lowermost mantle.

The synthesis of novel lanthanum hydroxyborate at extreme conditions.

The novel structure of lanthanum hydroxyborate LaBO(OH) was synthesized by the reaction of partially hydrolyzed lanthanum and boron oxide in a diamond anvil cell under high-pressure/high-temperature (HPHT) conditions of 30 GPa and ∼2,400 K. The single-crystal X-ray structure determination of the lanthanum hydroxyborate revealed: , = 6.555(2) Å, = 17.

Synthesis of Ultra-Incompressible and Recoverable Carbon Nitrides Featuring CN Tetrahedra.

Carbon nitrides featuring three-dimensional frameworks of CN tetrahedra are one of the great aspirations of materials science, expected to have a hardness greater than or comparable to diamond. After more than three decades of efforts to synthesize them, no unambiguous evidence of their existence has been delivered. Here, the high-pressure high-temperature synthesis of three carbon-nitrogen compounds, tI14-C N , hP126-C N , and tI24-CN , in laser-heated diamond anvil cells, is reported.

Title: Structure determination of ζ-N from single-crystal X-ray diffraction and theoretical suggestion for the formation of amorphous nitrogen.

The allotropy of solid molecular nitrogen is the consequence of a complex interplay between fundamental intermolecular as well as intramolecular interactions. Understanding the underlying physical mechanisms hinges on knowledge of the crystal structures of these molecular phases. That is especially true for ζ-N, key to shed light on nitrogen's polymerization.

Stabilization Of The CN Anion In Recoverable High-pressure Ln O (CN ) (Ln=La, Eu, Gd, Tb, Ho, Yb) Oxoguanidinates.

A series of isostructural Ln O (CN ) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln O (CN ) solids are composed of the hitherto unknown CN guanidinate anion-deprotonated guanidine.

Acoustic properties, elasticity, and equation of state of glycerol under pressure.

We employed high-pressure Brillouin scattering to study the pressure dependencies of acoustic modes of glycerol up to 14 GPa at 300 K. We observed longitudinal acoustic velocities and transverse acoustic velocities for the first time from 5 to 14 GPa. The results allow the determination of a complete set of elastic properties and an accurate determination of the pressure-volume (P-V) equation of state (EOS).

A MHz X-ray diffraction set-up for dynamic compression experiments in the diamond anvil cell.

An experimental platform for dynamic diamond anvil cell (dDAC) research has been developed at the High Energy Density (HED) Instrument at the European X-ray Free Electron Laser (European XFEL). Advantage was taken of the high repetition rate of the European XFEL (up to 4.5 MHz) to collect pulse-resolved MHz X-ray diffraction data from samples as they are dynamically compressed at intermediate strain rates (≤10 s), where up to 352 diffraction images can be collected from a single pulse train.

Universal diamond edge Raman scale to 0.5 terapascal and implications for the metallization of hydrogen.

The recent progress in generating static pressures up to terapascal values opens opportunities for studying novel materials with unusual properties, such as metallization of hydrogen and high-temperature superconductivity. However, an evaluation of pressure above ~0.3 terapascal is a challenge.