In-plane anisotropic van der Waals materials have emerged as a natural platform for anisotropic polaritons. Extreme anisotropic polaritons with in-situ broadband tunability are of great significance for on-chip photonics, yet their application remains challenging. In this work, we experimentally characterize through Fourier transform infrared spectroscopy measurements a van der Waals plasmonic material, 2M-WS, capable of supporting intrinsic room-temperature in-plane anisotropic plasmons in the far and mid-infrared regimes.
View Article and Find Full Text PDFMicromachines (Basel)
November 2023
By using melamine as a precursor for the copolymerization process, g-CN and g-CN/TCNQ/Eu complexes with various amounts of doping were created. These complexes were then examined using XRD, FT-IR, SEM, TEM, XPS, PL, UV-vis, and I-T. The degradation rates of pefloxacin (PEF), enrofloxacin (ENR), and ciprofloxacin (CIP) were 91.
View Article and Find Full Text PDFThe evolution of excitons from 2D to 3D is of great importance in photo-physics, yet the layer-dependent exciton polarizability hasn't been investigated in 2D semiconductors. Here, we determine the exciton polarizabilities for 3- to 11-layer black phosphorus-a direct bandgap semiconductor regardless of the thickness-through frequency-resolved photocurrent measurements on dual-gate devices and unveil the carrier screening effect in relatively thicker samples. By taking advantage of the broadband photocurrent spectra, we are also able to reveal the exciton response for higher-index subbands under the gate electrical field.
View Article and Find Full Text PDFMicromachines (Basel)
July 2023
Using an ultrasound-assisted chemical technique, ZnO quantum dot and ZnO composites were created. The optical characteristics and structural details of these composites were examined using TEM, XRD, XPS, FT-IR, UV-vis, and BET. The results revealed that both the ZnO quantum dot composite and ZnO composite exhibited outstanding optical properties, making them suitable for photocatalytic reactions.
View Article and Find Full Text PDFStacking bilayer structures is an efficient way to tune the topology of polaritons in in-plane anisotropic films, e.g., by leveraging the twist angle (TA).
View Article and Find Full Text PDFNew-generation infrared detectors call for higher operation temperature and polarization sensitivity. For traditional HgCdTe infrared detectors, the additional polarization optics and cryogenic cooling are necessary to achieve high-performance infrared polarization detection, while they can complicate this system and limit the integration. Here, a mixed-dimensional HgCdTe/black phosphorous van der Waals heterojunction photodiode is proposed for polarization-sensitive midwave infrared photodetection.
View Article and Find Full Text PDFThrough infrared spectroscopy, we systematically study the pressure effect on electronic structures of few-layer black phosphorus (BP) with layer number ranging from 2 to 13. We reveal that the pressure-induced shift of optical transitions exhibits strong layer dependence. In sharp contrast to the bulk counterpart which undergoes a semiconductor to semimetal transition under ∼1.
View Article and Find Full Text PDFHyperbolic polaritons exhibit large photonic density of states and can be collimated in certain propagation directions. The majority of hyperbolic polaritons are sustained in man-made metamaterials. However, natural-occurring hyperbolic materials also exist.
View Article and Find Full Text PDFIn principle, polymerization tends to produce amorphous or poorly crystalline materials. Efficiently producing high-quality single crystals by polymerization in solvent remains as an unsolved issue in chemistry, especially for covalent organic frameworks (COFs) with highly complex structures. To produce μm-sized single crystals, the growth time is prolonged to >15 days, far away from the requirements in practical applications.
View Article and Find Full Text PDFTunable terahertz plasmons are essential for reconfigurable photonics, which have been demonstrated in graphene through gating, though with relatively weak responses. Here we demonstrate strong terahertz plasmons in graphite thin films via infrared spectroscopy, with dramatic tunability by even a moderate temperature change or an in situ bias voltage. Meanwhile, through magnetoplasmon studies, we reveal that massive electrons and massless Dirac holes make comparable contributions to the plasmon response.
View Article and Find Full Text PDFPlasmons in two-dimensional (2D) materials beyond graphene have recently gained much attention. However, the experimental investigation is limited due to the lack of suitable materials. Here, we experimentally demonstrate localized plasmons in a correlated 2D charge-density-wave (CDW) material: 2H-TaSe.
View Article and Find Full Text PDFThe temperature dependence of the band gap is crucial to a semiconductor. Bulk black phosphorus is known to exhibit an anomalous behavior. Through optical spectroscopy, here we show that the temperature effect on black phosphorus band gap gradually evolves with decreasing layer number, eventually turns into a normal one in the monolayer limit, rendering a crossover from the anomalous to the normal.
View Article and Find Full Text PDFThe strength of light-matter interaction is of central importance in photonics and optoelectronics. For many widely studied two-dimensional semiconductors, such as MoS, the optical absorption due to exciton resonances increases with thickness. However, here we will show, few-layer black phosphorus exhibits an opposite trend.
View Article and Find Full Text PDFThe experimental discovery of Weyl semimetals offers unprecedented opportunities to study Weyl physics in condensed matters. Unique electromagnetic response of Weyl semimetals such as chiral magnetic effect has been observed and presented by the axial θ E · B term in electromagnetic Lagrangian (E and B are the electric and magnetic field, respectively). But till now, the experimental progress in this direction in Weyl semimetals is restricted to the DC regime.
View Article and Find Full Text PDFA hyperbolic plasmonic surface supports highly directional propagating polaritons with extremely large density of states. Such plasmon polaritons have been realized in artificially structured metasurfaces. However, the upper bound of the achievable plasmon wave vector is limited by the structure size, which calls for a natural hyperbolic surface without any structuring.
View Article and Find Full Text PDFInterlayer interactions in 2D materials, also known as van der Waals (vdWs) interactions, play a critical role in the physical properties of layered materials. It is fascinating to manipulate the vdWs interaction, and hence to "redefine" the material properties. Here, we demonstrate that in-plane biaxial strain can effectively tune the vdWs interaction of few-layer black phosphorus with thickness of 2-10 layers, using infrared spectroscopy.
View Article and Find Full Text PDFThe dilute donor-fullerene bulk heterojunction (BHJ) has been proven to be an efficient architecture of organic solar cells. However, the hole-extraction pathway and the origin of the high open-circuit voltage ( V) in this peculiar architecture remains elusive. Direct evidence is provided here that the photogenerated holes can be extracted via the acceptor phase even under the operating conditions.
View Article and Find Full Text PDFRecently, Weyl semimetals have been experimentally discovered in both inversion-symmetry-breaking and time-reversal-symmetry-breaking crystals. The non-trivial topology in Weyl semimetals can manifest itself with exotic phenomena, which have been extensively investigated by photoemission and transport measurements. Despite the numerous experimental efforts on Fermi arcs and chiral anomaly, the existence of unconventional zeroth Landau levels, as a unique hallmark of Weyl fermions, which is highly related to chiral anomaly, remains elusive owing to the stringent experimental requirements.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2018
Because of the strong quantum confinement effect, few-layer γ-InSe exhibits a layer-dependent band gap, spanning the visible and near infrared regions, and thus recently has been drawing tremendous attention. As a two-dimensional material, the mechanical flexibility provides an additional tuning knob for the electronic structures. Here, for the first time, we engineer the band structures of few-layer and bulk-like InSe by uniaxial tensile strain and observe a salient shift of photoluminescence peaks.
View Article and Find Full Text PDFBlack phosphorus is an infrared layered material. Its bandgap complements other widely studied two-dimensional materials: zero-gap graphene and visible/near-infrared gap transition metal dichalcogenides. Although highly desirable, a comprehensive infrared characterization is still lacking.
View Article and Find Full Text PDFAtomically thin 2D-layered transition-metal dichalcogenides have been studied extensively in recent years because of their intriguing physical properties and promising applications in nanoelectronic devices. Among them, ReSe2 is an emerging material that exhibits a stable distorted 1T phase and strong in-plane anisotropy due to its reduced crystal symmetry. Here, the anisotropic nature of ReSe2 is revealed by Raman spectroscopy under linearly polarized excitations in which different vibration modes exhibit pronounced periodic variations in intensity.
View Article and Find Full Text PDFGuang Pu Xue Yu Guang Pu Fen Xi
December 2015
The Fourier interferometric spectrometer (FIS) acquires the interference data information of the spectrum and during the spectrum data processing, a series of spectrum reconstruction will be performed on the interference information to obtain the final spectrum information data. The spectral calibration is the key step to spectrum reconstruction of FIS, which directly determines accuracy and availability of the spectrum results. This paper introduces the basic ideas and calibration accuracy about the spectral calibration for the FIS and puts forward a new spectral calibration method based on calculating the precise value of the total optical path difference (TOPD).
View Article and Find Full Text PDFSelf-assembly of metavanadate and organosilver(I) salts leads to a novel dodecahedrane-like [Ag30 ((t) BuS)20 ](10+) silver(I) thiolate nanocage that tightly wraps an unusual C2h polyoxovanadate anion. The polyoxovanadate core undergoes transformation to a D3d configuration upon acidification, and reverts back to its original C2h structure upon addition of base. Chromism was observed for the silver(I) thiolate cluster during the configurational change of the central polyoxovanadate core; the color of the solution changes reversibly from green to dark yellow.
View Article and Find Full Text PDFAn oxidase-like mimic system based on facilely synthesized Ag@Ag3PO4 microcubes (Ag@Ag3PO4MCs) was designed and utilized to detect mercury ions with high selectivity and ultrasensitivity. Ag@Ag3PO4MCs with an average size of ca. 1.
View Article and Find Full Text PDFA new silver(I)-alkynyl cluster with a [Eu(W5O18)2](9-) polyoxoanionic core of [Ag42{Eu(W5O18)2}((t)BuC≡C)28Cl4] [OH]·H2O (1) has been designed and synthesized. The [Eu(W5O18)2](9-) polyoxoanion acts as a template to induce the formation of the surrounding 42-core Ag(I) cage. Due to the hydrophobic silver(I)-alkynyl shell, 1 features an unusual fluorescence enhancement as compared to the precursor of the [Eu(W5O18)2](9-) polyoxoanionic core.
View Article and Find Full Text PDF