Multiscale modifications of carbon nitride to strengthen reaction kinetics and lower thermodynamic barriers for efficient photocatalytic oxygen evolution.

Photocatalytic oxygen evolution reaction (OER) is pivotal for sustainable energy systems yet lacks high-performance catalysts capable of strong visible light absorption, robust charge dynamics, fast reaction kinetics, and high oxidation capability. Herein, we report the multiscale optimization of carbon nitride through the construction of porous curled carbon nitride nanosheets (CNA-B30) incorporating boron center/cyano group Lewis acid-base pairs (LABPs). The unique chemical and structural features of CNA-B30 extended the photoabsorption edges of π → π* and n → π* electronic transitions to 470 nm and 715 nm, respectively.

Facile and green synthesis of Ag/Cu bimetallic nanoparticles using waste banana peel extract for effective corrosion inhibition of mixed sulfate-reducing bacteria.

Microbiologically induced corrosion (MIC) is widespread in the oilfield industry, and new environmentally friendly materials are urgently needed to inhibit MIC with the increasing environmental requirements and microbial resistance problems. The synthesis method and cost of the materials are important factors that must be considered in the production and application. In this study, Ag/Cu bimetallic nanoparticles (BNPs) were synthesized by eco-friendly and sustainable method using waste banana peel extract (BPE) as a green reducing.

Biodegradation characteristics of p-Chloroaniline and the mechanism of co-metabolism with aniline by Pseudomonas sp. CA-1.

Co-metabolism is a promising method to optimize the biodegradation of p-Chloroaniline (PCA). In this study, Pseudomonas sp. CA-1 could reduce 76.

Performance evaluation of rhamnolipid biosurfactant produced by Pseudomonas aeruginosa and its effect on marine oil-spill remediation.

This study aimed to reveal that the effect of biosurfactant on the dispersion and degradation of crude oil. Whole genome analysis showed that Pseudomonas aeruginosa GB-3 contained abundant genes involved in biosurfactant synthesis and metabolic processes and had the potential to degrade oil. The biosurfactant produced by strain GB-3 was screened by various methods.

An immobilized composite microbial material combined with slow release agents enhances oil-contaminated groundwater remediation.

Microbial remediation of oil-contaminated groundwater is often limited by the low temperature and lack of nutrients in the groundwater environment, resulting in low degradation efficiency and a short duration of effectiveness. In order to overcome this problem, an immobilized composite microbial material and two types of slow release agents (SRA) were creatively prepared. Three oil-degrading bacteria, Serratia marcescens X, Serratia sp.

Characteristic microbiome and synergistic mechanism by engineering agent MAB-1 to evaluate oil-contaminated soil biodegradation in different layer soil.

Bioremediation is a sustainable and pollution-free technology for crude oil-contaminated soil. However, most studies are limited to the remediation of shallow crude oil-contaminated soil, while ignoring the deeper soil. Here, a high-efficiency composite microbial agent MAB-1 was provided containing Bacillus (naphthalene and pyrene), Acinetobacter (cyclohexane), and Microbacterium (xylene) to be synergism degradation of crude oil components combined with other treatments.

Application of bacterial agent YH for remediation of pyrene-heavy metal co-pollution system: Efficiency, mechanism, and microbial response.

The combination of organic and heavy metal pollutants can be effectively and sustainably remediated using bioremediation, which is acknowledged as an environmentally friendly and economical approach. In this study, bacterial agent YH was used as the research object to explore its potential and mechanism for bioremediation of pyrene-heavy metal co-contaminated system. Under the optimal conditions (pH 7.

In situ generated iron oxide nanosheet on iron foam electrode for enhanced electro-Fenton performance toward pharmaceutical wastewater treatment.

Electro-Fenton (EF) is considered to be an effective technology for the purification of organic wastewater containing antibiotics, but the construction of accessible and efficient heterogeneous EF catalytic materials still faces challenges. In this study, an iron foam-derived electrode (FeO/if-400) was prepared by a simple method (chemical oxidation combined heat treatment). The fabricated electrode presented great EF degradation efficiency under wide pH range (almost completely removing 50 mg L TNZ within 60 min) and maintained great stability after consecutive operation (>95% removal after six cycles).

Design and Experimental Evaluation of a Dual-Cantilever Piezoelectric Film Sensor with a Broadband Response and High Sensitivity.

Cantilever-beam-type PVDF (Polyvinylidene Fluoride) piezoelectric film sensors are commonly utilized for vibration signal detection due to their simple structures and ease of processing. Traditional cantilevered PVDF piezoelectric film sensors are susceptible to the influence of the second-order vibration mode and have a low lateral stress distribution at the free end, which limit their measurement bandwidth and sensitivity. This study is on the design of a dual-cantilever PVDF piezoelectric film sensor based on the principle of cantilevered piezoelectric film sensors.

Rejoint of Carbon Nitride Fragments into Multi-Interfacial Order-Disorder Homojunction for Robust Photo-Driven Generation of H O.

Photocatalytic technology based on carbon nitride (C N ) offers a sustainable and clean approach for hydrogen peroxide (H O ) production, but the yield is severely limited by the sluggish hot carriers due to the weak internal electric field. In this study, a novel approach is devised by fragmenting bulk C N  into smaller pieces (CN-NH ) and then subjecting it to a directed healing process to create multiple order-disorder interfaces (CN-NH -NaK). The resulting junctions in CN-NH -NaK significantly boost charge dynamics and facilitate more spatially and orderly separated redox centers.

Enhancing photocatalytic hydrogen production of carbon nitride: Dominant advantage of crystallinity over mass transfer.

Mass transfer enhancement and crystallinity engineering are two prevailing technologies for photocatalyst modification. However, their relative effectiveness in enhancing photocatalytic activity remains unclear due to the lack of rational probing catalysts. In this study, we synthesized two distinct carbon nitride (CN) catalysts: one with a high specific surface area (CN-HA) and the other with improved crystallinity (CN-HC).

Heterogeneous Fenton treatment of shale gas fracturing flow-back wastewater by spherical Fe/AlO catalyst.

In this work, efficient Fenton strategy have been proposed for degradation of shale gas fracturing flow-back wastewater using the spherical Fe/AlO supported catalyst. Prior to actual fracturing fluid treatment, the typical model wastewaters such as p-nitrophenol and polyacrylamide were employed to evaluate the catalytic properties of prepared catalyst, and then Fenton treatment of the shale gas fracturing flow-back wastewater was performed on the self-assembled catalytic degradation reactor for continuous flow purification. Results showed that under the conditions of 0.

Efficient Fenton-like degradation of tetracycline by stalactite-like CuCo-LDO/CN catalysts: The overlooked contribution of dissolved oxygen.

In the Fenton-like processes, the resources that exist in the system itself (e.g., dissolved oxygen, electron-rich pollutants) are often overlooked.

Fingerprint characteristics of refined oils and their traceability in the groundwater environment.

Chemical fingerprinting is essential for identifying the presence and responding to oil spills that frequently contaminate the groundwater environment of refineries. In this study, crude oil and oil products from the atmospheric and vacuum distillation units of a refinery were analyzed by gas chromatography-mass spectrometry (GC-MS) to evaluate their chemical variability before and after refinery. A series of experiments involving evaporation and soil column penetration were conducted to simulate refined oil spilling into groundwater and determine appropriate characteristic ratios (CRs) for principal component analysis (PCA) for oil source identification.

Marine oil spill remediation by Candelilla wax modified coal fly ash cenospheres.

Biodegradable candelilla wax (CW) was creatively used for hydrophobic modification of coal fly ash cenospheres (FACs), a waste product from thermal power plants, and a new spherical hollow particulate adsorbent with fast oil adsorption rate and easy agglomeration was prepared. CW was confirmed to physically coat FACs and the optimum mass of wax added to 3 g of FACs was 0.05 g.

Enhanced crude oil degradation by remodeling of crude oil-contaminated soil microbial community structure using sodium alginate/graphene oxide/Bacillus C5 immobilized pellets.

Bioaugmentation (BA) of oil-contaminated soil by immobilized microorganisms is considered to be a promising technology. However, available high-efficiency microbial agents remain very limited. Therefore, we prepared a SA/GO/C5 immobilized gel pellets by embedding the highly efficient crude oil degrading bacteria Bacillus C5 in the SA/GO composite material.

Engineered g-CN-Based Nanomaterials for Photocatalytic Energy Conversion and Environmental Remediation.

Photocatalysis plays a vital role in sustainable energy conversion and environmental remediation because of its economic, eco-friendly, and effective characteristics. Nitrogen-rich graphitic carbon nitride (g-CN) has received worldwide interest owing to its facile accessibility, metal-free nature, and appealing electronic band structure. This review summarizes the latest progress for g-CN-based photocatalysts in energy and environmental applications.

Reconstruction of microbiome and functionality accelerated crude oil biodegradation of 2,4-DCP-oil-contaminated soil systems using composite microbial agent B-Cl.

Biodegradation is one of the safest and most economical methods for the elimination of toxic chlorophenols and crude oil from the environment. In this study, aerobic degradation of the aforementioned compounds by composite microbial agent B-Cl, which consisted of Bacillus B1 and B2 in a 3:2 ratio, was analyzed. The biodegradation mechanism of B-Cl was assessed based on whole genome sequencing, Fourier transform infrared spectroscopy and gas chromatographic analyses.

A novel dehydrocoenzyme activator combined with a composite microbial agent TY for enhanced bioremediation of crude oil-contaminated soil.

Bioaugmentation (BA) and biostimulation (BS) synergistic remediation is an effective remediation strategy for oil-contaminated soil. In this study, the optimal combination system of composite microbial agent TY (Achromobacter: Pseudomona = 2:1) and dehydrocoenzyme activator (NaNO (7.0 g/L), (NH)HPO (1.

Pollution characteristics of groundwater in an agricultural hormone-contaminated site and implementation of Fenton oxidation process.

The groundwater polluted by an agricultural hormone site was taken as the research object, and a total of 7 groundwater samples were collected at different locations in the plant. The main pollutants in the research area were determined to be extractable petroleum hydrocarbons (C-C); 1,2-dichloroethane; 1,1,2-trichloroethane; carbon tetrachloride; vinyl chloride, and chloroform; the maximum content of these pollutants can reach 271 mg/L, 1.68 × 10 µg/L, 1.

A novel chitosan-biochar immobilized microorganism strategy to enhance bioremediation of crude oil in soil.

The chitosan-biochar composite is a clean and environmentally friendly immobilized microorganisms carrier. In this study, the chitosan-biochar composite as a carrier to immobilize a compound microbial agent contained Pseudomonas aeruginosa and Bacillus licheniformis, and investigated its role in the remediation of oil-contaminated soil. When using 1% (v/v) acetic acid, 3% (m/v) chitosan solution, 0.

Flux-assisted synthesis of bismuth nanoparticle decorated carbon nitride for efficient photocatalytic degradation of endocrine disrupting compound.

Traditional approaches to synthesizing bismuth nanoparticle decorated carbon nitride (CN) materials suffer from the complex synthesis process and the addition of a surfactant, which is not conducive to environmental protection. To address these problems, we adopted a simple and green flux-assisted approach for the first time to fabricate metallic bismuth nanoparticle decorated CN (BiCCN). Electron microscopy results suggested that bismuth vanadate was converted into small bismuth nanoparticles the flux-assisted approach.

Enhanced activity of ZnS (111) by N/Cu co-doping: Accelerated degradation of organic pollutants under visible light.

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment. In this study, N/Cu co-doped ZnS nanosphere photocatalyst (N/Cu-ZnS) is synthesized by a hydrothermal method for the first time. After doping, the texture of nanosphere becomes loose, the nanometer diameter is reduced, making the specific surface area of catalyst increased from 34.

Defect-rich MoS/NiS nanosheets loaded on SiNWs for efficient and stable photoelectrochemical hydrogen production.

Photoelectrochemical (PEC) reaction with efficient, stable, and cost-effective photocathodes using non-precious metals will be one of the most environmentally friendly technologies for hydrogen (H) generation under the worldwide pressure for carbon neutrality. Herein, a new 3-dimentional (3D) SiNWs@MoS/NiS photocathode was designed and synthesized. Defect-rich MoS/NiS nanosheets on silicon nanowires (SiNWs) provide more active sites to promote charge transfer and photo-generated electron-hole separation.