Simulation Study on the Stabilization Control Performance of Low-Calorific-Value Waste Combustion in Waste Incinerators.

To address the instability of low-calorific-value waste incineration processes and suppress the generation of toxic dioxins, this study examines a 600 t/day waste incineration furnace as a case study. Numerical simulations of the incineration process were conducted by using bed calculation software FLIC and Fluent. A waste incineration cleanliness index was defined, and the impact of the reduced calorific value of the incoming waste on the temperature distribution within the incineration furnace was explored.

Numerical Simulation Study on Combustion of Low Calorific Value Waste Blended with Biomass.

Numerical simulations of a 600 t/day waste incinerator was carried out using the fluid dynamic incinerator code and Fluent to evaluate the effect of biomass blending on furnace temperature, pollutant generation, and selective noncatalytic-reduction (SNCR) denitrification when treating low calorific-value waste. The results show that as the biomass blending ratio increases, the water content gradually decreases, the calorific value increases, and the maximum temperature of the incinerator gradually increases from 1227 to 1408 K, while the content of exported NO increases from 579 to 793 mg/Nm; during the combustion of low-quality waste, the residence time of the flue gas in the high-temperature region (above 1123 K) is 1.62 s.