Templates-Built Structural Designs for Piezoelectrochemical Pressure Sensors.

Self-powered sensors, capable of detecting static and dynamic pressure without an external power source, are pivotal for advancements in human-computer interaction, health monitoring, and artificial intelligence. Current sensing technologies, however, often fall short of meeting the growing needs for precise and timely pressure monitoring. This article introduces a novel self-powered pressure sensor utilizing electrochemical reactions.

Uncertainty and Irreproducibility of Triboelectricity Based on Interface Mechanochemistry.

Triboelectrification mechanism is still not understood, despite centuries of investigations. Here, we propose a model showing that mechanochemistry is key to elucidate triboelectrification fundamental properties. Studying contact between gold and silicate glasses, we observe that the experimental triboelectric output is subject to large variations and polarity inversions.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications.

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing.

Perovskite Piezoelectric-Based Flexible Energy Harvesters for Self-Powered Implantable and Wearable IoT Devices.

In the ongoing fourth industrial revolution, the internet of things (IoT) will play a crucial role in collecting and analyzing information related to human healthcare, public safety, environmental monitoring and home/industrial automation. Even though conventional batteries are widely used to operate IoT devices as a power source, these batteries have a drawback of limited capacity, which impedes broad commercialization of the IoT. In this regard, piezoelectric energy harvesting technology has attracted a great deal of attention because piezoelectric materials can convert electricity from mechanical and vibrational movements in the ambient environment.

Ferroelectric Polymer Nanofibers Reminiscent of Morphotropic Phase Boundary Behavior for Improved Piezoelectric Energy Harvesting.

Ferroelectric and piezoelectric polymers have attracted great attention from many research and engineering fields due to its mechanical robustness and flexibility as well as cost-effectiveness and easy processibility. Nevertheless, the electrical performance of piezoelectric polymers is very hard to reach that of piezoelectric ceramics basically and physically, even in the case of the representative ferroelectric polymer, poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)). Very recently, the concept for the morphotropic phase boundary (MPB), which has been exclusive in the field of high-performance piezoelectric ceramics, has been surprisingly confirmed in P(VDF-TrFE) piezoelectric copolymers by the groups.

Hydrogel Ionic Diodes toward Harvesting Ultralow-Frequency Mechanical Energy.

Energy harvesting from human motion is regarded as a promising protocol for powering portable electronics, biomedical devices, and smart objects of the Internet of things. However, state-of-the-art mechanical-energy-harvesting devices generally operate at frequencies (>10 Hz) well beyond human activity frequencies. Here, a hydrogel ionic diode formed by the layered structures of anionic and cationic ionomers in hydrogels is presented.

Nanointerfacial Layer Effect on Dielectric and Piezoelectric Responses in Chemical Solution-Derived Lead-Free Alkaline Niobate-Based Thin Films.

Since nonpiezoelectric interfacial layers even at the nanoscale significantly affect the performance of lead-free piezoelectric thin films, the quantitative characterization of property changes of thin films due to interfacial layers is of great importance and should be precisely undertaken for piezoelectric microelectromechanical system (MEMS) and nanoelectromechanical system (NEMS) devices. In contrast to widely accepted concepts for interfacial layer thickness estimation based on the existing series capacitor model, we find that the interfacial layer thickness at the top and the bottom interfaces is clearly different in chemical solution deposition (CSD)-derived (K,Na)(Mn,Nb)O (KNMN) thin films. Interestingly, the thickness of the bottom interface increases linearly with increasing thin-film thickness, while the thickness of the top interface is constant regardless of the thin-film thickness.

Multiscale surface modified magneto-mechano-triboelectric nanogenerator enabled by eco-friendly NaCl imprinting stamp for self-powered IoT applications.

In this paper, we demonstrated a multiscale micro- and nano-structured magneto-mechano-triboelectric nanogenerator (MMTENG) enabled by a salt particle imprinting process to power an internet of thing (IoT) sensor. The fine salt particles were utilized to form a multiscale structure on a triboelectric polymer film by mechanical pressure via an eco-friendly, low-cost, and simple process, thereby reinforcing the contact triboelectrification and electrostatic induction. The surface modified MMTENG can generate an open-circuit peak-to-peak voltage of 851 V, a short-circuit current of 155 μA, and a maximum peak power of 10.

Biomimetic and flexible piezoelectric mobile acoustic sensors with multiresonant ultrathin structures for machine learning biometrics.

Flexible resonant acoustic sensors have attracted substantial attention as an essential component for intuitive human-machine interaction (HMI) in the future voice user interface (VUI). Several researches have been reported by mimicking the basilar membrane but still have dimensional drawback due to limitation of controlling a multifrequency band and broadening resonant spectrum for full-cover phonetic frequencies. Here, highly sensitive piezoelectric mobile acoustic sensor (PMAS) is demonstrated by exploiting an ultrathin membrane for biomimetic frequency band control.

Triboelectric Nanogenerator versus Piezoelectric Generator at Low Frequency (<4 Hz): A Quantitative Comparison.

Triboelectric nanogenerators (TENGs) and piezoelectric generators (PGs) are generally considered the two most common approaches for harvesting ambient mechanical energy that is ubiquitous in our everyday life. The main difference between the two generators lies in their respective working frequency range. Despite the remarkable progress, there has been no quantitative studies on the operating frequency band of the two generators at frequency values below 4 Hz, typical of human motion.

Progress in lead-free piezoelectric nanofiller materials and related composite nanogenerator devices.

Current piezoelectric device systems need a significant reduction in size and weight so that electronic modules of increasing capacity and functionality can be incorporated into a great range of applications, particularly in energy device platforms. The key question for most applications is whether they can compete in the race of down-scaling and an easy integration with highly adaptable properties into various system technologies such as nano-electro-mechanical systems (NEMS). Piezoelectric NEMS have potential to offer access to a parameter space for sensing, actuating, and powering, which is inflential and intriguing.

Selective Phase Control of Dopant-Free Potassium Sodium Niobate Perovskites in Solution.

As one of the perovskite families, potassium sodium niobates (KNa)NbO (KNN) have been gaining tremendous attention due to their various functional properties which can be largely determined by their crystallographic phase and composition. However, a selective evolution of different phases for KNN with controlled composition can be difficult to achieve, especially in solution chemical synthesis because of its strong tendency to stabilize into orthorhombic phase at conventional synthetic temperature. We herein developed a facile solution approach to control the phase and composition of dopant-free KNN particles selectively through the modification of reaction parameters.

Integrated Triboelectric Nanogenerators in the Era of the Internet of Things.

Since their debut in 2012, triboelectric nanogenerators (TENGs) have attained high performance in terms of both energy density and instantaneous conversion, reaching up to 500 W m and 85%, respectively, synchronous with multiple energy sources and hybridized designs. Here, a comprehensive review of the design guidelines of TENGs, their performance, and their designs in the context of Internet of Things (IoT) applications is presented. The development stages of TENGs in large-scale self-powered systems and technological applications enabled by harvesting energy from water waves or wind energy sources are also reviewed.

Piezoelectric Energy Harvesting from Two-Dimensional Boron Nitride Nanoflakes.

Two-dimensional (2D) piezoelectric hexagonal boron nitride nanoflakes (h-BN NFs) were synthesized by a mechanochemical exfoliation process and transferred onto an electrode line-patterned plastic substrate to characterize the energy harvesting ability of individual NFs by external stress. A single BN NF produced alternate piezoelectric output sources of ∼50 mV and ∼30 pA when deformed by mechanical bendings. The piezoelectric voltage coefficient () of a single BN NF was experimentally determined to be 2.

Modulation of surface physics and chemistry in triboelectric energy harvesting technologies.

Mechanical energy harvesting technology converting mechanical energy wasted in our surroundings to electrical energy has been regarded as one of the critical technologies for self-powered sensor network and Internet of Things (IoT). Although triboelectric energy harvesters based on contact electrification have attracted considerable attention due to their various advantages compared to other technologies, a further improvement of the output performance is still required for practical applications in next-generation IoT devices. In recent years, numerous studies have been carried out to enhance the output power of triboelectric energy harvesters.

Dual-Structured Flexible Piezoelectric Film Energy Harvesters for Effectively Integrated Performance.

Improvement of energy harvesting performance from flexible thin film-based energy harvesters is essential to accomplish future self-powered electronics and sensor systems. In particular, the integration of harvesting signals should be established as a single device configuration without complicated device connections or expensive methodologies. In this research, we study the dual-film structures of the flexible PZT film energy harvester experimentally and theoretically to propose an effective principle for integrating energy harvesting signals.

Flash-Induced Stretchable Cu Conductor via Multiscale-Interfacial Couplings.

Herein, a novel stretchable Cu conductor with excellent conductivity and stretchability is reported via the flash-induced multiscale tuning of Cu and an elastomer interface. Microscale randomly wrinkled Cu (amplitude of ≈5 µm and wavelength of ≈45 µm) is formed on a polymer substrate through a single pulse of a millisecond flash light, enabling the elongation of Cu to exceed 20% regardless of the stretching direction. The nanoscale interlocked interface between the Cu nanoparticles (NPs) and the elastomer increases the adhesion force of Cu, which contributes to a significant improvement of the Cu stability and stretchability under harsh yielding stress.

Review on Electromechanical Coupling Properties of Biomaterials.

Electromechanical coupling properties of biological materials, especially cellulose from plant cell walls and proteins from animals, are of great interest for applications in biocompatible sensors and actuators and ecofriendly energy harvesters. On the basis of their anisotropic nanostructures, cellulose and fibrous proteins such as collagen, silk, keratin, etc. are expected to be piezoelectric; however, this property does not necessarily translate to cellulose- or protein-containing bulk materials.

Biomimetic Porifera Skeletal Structure of Lead-Free Piezocomposite Energy Harvesters.

The elastic composite-based piezoelectric energy-harvesting technology is highly desired to enable a wide range of device applications, including self-powered wearable electronics, robotic skins, and biomedical devices. Recently developed piezoelectric composites are based on inorganic piezoelectric fillers and polymeric soft matrix to take advantages of both components. However, there are still limitations such as weak stress transfer to piezoelectric elements and poor dispersion of fillers in matrix.

Lead-Free Perovskite Nanowire-Employed Piezopolymer for Highly Efficient Flexible Nanocomposite Energy Harvester.

In the past two decades, mechanical energy harvesting technologies have been developed in various ways to support or power small-scale electronics. Nevertheless, the strategy for enhancing current and charge performance of flexible piezoelectric energy harvesters using a simple and cost-effective process is still a challenging issue. Herein, a 1D-3D (1-3) fully piezoelectric nanocomposite is developed using perovskite BaTiO (BT) nanowire (NW)-employed poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) for a high-performance hybrid nanocomposite generator (hNCG) device.

Self-Powered Real-Time Arterial Pulse Monitoring Using Ultrathin Epidermal Piezoelectric Sensors.

Continuous monitoring of an arterial pulse using a pressure sensor attached on the epidermis is an important technology for detecting the early onset of cardiovascular disease and assessing personal health status. Conventional pulse sensors have the capability of detecting human biosignals, but have significant drawbacks of power consumption issues that limit sustainable operation of wearable medical devices. Here, a self-powered piezoelectric pulse sensor is demonstrated to enable in vivo measurement of radial/carotid pulse signals in near-surface arteries.

Stretchable piezoelectric nanocomposite generator.

Piezoelectric energy conversion that generate electric energy from ambient mechanical and vibrational movements is promising energy harvesting technology because it can use more accessible energy resources than other renewable natural energy. In particular, flexible and stretchable piezoelectric energy harvesters which can harvest the tiny biomechanical motions inside human body into electricity properly facilitate not only the self-powered energy system for flexible and wearable electronics but also sensitive piezoelectric sensors for motion detectors and in vivo diagnosis kits. Since the piezoelectric ZnO nanowires (NWs)-based energy harvesters (nanogenerators) were proposed in 2006, many researchers have attempted the nanogenerator by using the various fabrication process such as nanowire growth, electrospinning, and transfer techniques with piezoelectric materials including polyvinylidene fluoride (PVDF) polymer and perovskite ceramics.

Versatile Transfer of an Ultralong and Seamless Nanowire Array Crystallized at High Temperature for Use in High-Performance Flexible Devices.

Nanowire (NW) transfer technology has provided promising strategies to realize future flexible materials and electronics. Using this technology, geometrically controlled, high-quality NW arrays can now be obtained easily on various flexible substrates with high throughput. However, it is still challenging to extend this technology to a wide range of high-performance device applications because its limited temperature tolerance precludes the use of high-temperature annealing, which is essential for NW crystallization and functionalization.