Space and time-resolved probing of heterogeneous catalysis reactions using lab-on-a-chip.

Probing catalytic reactions on a catalyst surface in real time is a major challenge. Herein, we demonstrate the utility of a continuous flow millifluidic chip reactor coated with a nanostructured gold catalyst as an effective platform for in situ investigation of the kinetics of catalytic reactions by taking 5-(hydroxymethyl)furfural (HMF) to 2,5-furandicarboxylic acid (FDCA) conversion as a model reaction. The idea conceptualized in this paper can not only dramatically change the ability to probe the time-resolved kinetics of heterogeneous catalysis reactions but also used for investigating other chemical and biological catalytic processes, thereby making this a broad platform for probing reactions as they occur within continuous flow reactors.

Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp.

Millifluidics for time-resolved mapping of the growth of gold nanostructures.

Innovative in situ characterization tools are essential for understanding the reaction mechanisms leading to the growth of nanoscale materials. Though techniques, such as in situ transmission X-ray microscopy, fast single-particle spectroscopy, small-angle X-ray scattering, etc., are currently being developed, these tools are complex, not easily accessible, and do not necessarily provide the temporal resolution required to follow the formation of nanomaterials in real time.

Harvesting economics and strategies using centrifugation for cost effective separation of microalgae cells for biodiesel applications.

Inefficient or energy-intensive microalgal harvesting strategies for biodiesel production have been a major setback in the microalgae industry. Harvesting by centrifugation is generally characterized by high capture efficiency (>90%) under low flow rates and high energy consumption. However, results from the present study demonstrated that by increasing the flow rates (>1L/min), the lower capture efficiencies (<90%) can be offset by the larger volumes of culture water processed through the centrifuge, resulting in net lower energy consumption.

Evaluating coagulation pretreatment on poultry processing wastewater for dissolved air flotation.

Eleven metal coagulants and one polyelectrolyte were assessed for their suitability in assisting a dissolved air flotation (DAF) system aimed at treating poultry processing wastewater. Preliminary jar tests determined that a combination of 800 mg/L of FeCl(3) (ferric chloride) and 900 mg/L of Floccin 1115 would provide the best treatment by removing at least 98% of the total suspended solids (TSS) and 97% of the volatile suspended solids (VSS), while providing a 97% increase in water clarity. Final flotation tests suggested that the flocculated particles could be carried to the surface with 40% recycle ratio of the DAF.

Hydrothermal liquefaction of separated dairy manure for production of bio-oils with simultaneous waste treatment.

A bench scale hydrothermal liquefaction (HTL) system was tested using dairy manure to explore biooil production and waste treatment potential. Carbon monoxide was used as the process gas and sodium carbonate (Na(2)CO(3)) as catalyst. At a 350°C process temperature, the HTL unit produced 3.

Oxygen electrode-based single antibody amperometric biosensor for qualitative detection of E. coli and bacteria in water.

Design and performance of an amperometric biosensor for E. coli O157:H7 that is based on a common dissolved oxygen probe is discussed. Anti-E.

Toxicity and biouptake of lead and arsenic by Daphnia pulex.

Acute and chronic toxicity studies were conducted on Daphnia pulex using synthetic lead and arsenic water samples. For acute studies, solutions with 0.25, 0.