Isolation of Hemiketal and Hydroxy Ketone Tautomers of Synthetic Intermediates Each Affording 18-Hydroxycortisol-.

During the synthesis of deuterated 18-hydroxycortisol, two of the synthetic intermediates have been found to exist in tautomeric forms as the acyclic 18-hydroxy 20-ketone and the cyclic 18,20-hemiketal corresponding to the previously identified less polar (L) and more polar (M) forms of C-18 hydroxylated steroids, respectively. Specifically, -chloranil oxidation of 18-hydroxycortisol-17,21-acetonide afforded two isomers of the 6,7-dehydro analogue; separate catalytic reduction of each isomer under deuterium gave a single isomer of acetonide-protected 18-hydroxycortisol- for each, with the more polar isomer giving a more polar product and the less polar isomer giving a less polar product. The more polar product (corresponding to M) was characterized as 18,20-hemiketal; 18-hydroxycortisol-17,21-acetonide-18,20-hemiketal-: in the deuterochloroform solution, it was found to slowly convert to a substance consistent with the hydroxy ketone structure with features resembling those of the isolated less polar isomer (corresponding to L).

Synthesis and pharmacological validation of a novel radioligand for the orphan GPR88 receptor.

GPR88 is an orphan G protein-coupled receptor which has been implicated in a number of striatal-associated disorders. Herein we describe the synthesis and pharmacological characterization of the first GPR88 radioligand, [H]RTI-33, derived from a synthetic agonist RTI-13951-33. [H]RTI-33 has a specific activity of 83.

Identification of a Potent Human Trace Amine-Associated Receptor 1 Antagonist.

Human trace amine-associated receptor subtype 1 (hTAAR1) is a G protein-coupled receptor that has therapeutic potential for multiple diseases, including schizophrenia, drug addiction, and Parkinson's disease (PD). Although several potent agonists have been identified and have shown positive results in various clinical trials for schizophrenia, the discovery of potent hTAAR1 antagonists remains elusive. Herein, we report the results of structure-activity relationship studies that have led to the discovery of a potent hTAAR1 antagonist (RTI-7470-44, ).

Purification of animal immunoglobulin G (IgG) using peptoid affinity ligands.

The availability of highly pure animal antibodies is critical in the production of diagnostic tools and biosensors. The peptoid PL16, previously isolated from an ensemble of peptoid variants of the IgG-binding peptide HWRGWV, was utilized in this work as affinity ligand on WorkBeads resin for the purification of immunoglobulin G (IgG) from a variety of mammalian sources and chicken immunoglobulin Y (IgY). The chromatographic protocol initially optimized for murine serum and ascites was subsequently employed for processing rabbit, goat and sheep, donkey, llama, and chicken sera.

Design, synthesis and biological evaluation of a bi-specific vaccine against α-pyrrolidinovalerophenone (α-PVP) and 3,4-methylenedioxypyrovalerone (MDPV) in rats.

α-PVP (α-pyrrolidinovalerophenone) and MDPV (3,4-methylenedioxypyrovalerone) are potent abused stimulants that are members of the synthetic cathinone class of drugs. Although these drugs are taken with recreational intent, high doses can lead to unintended adverse effects including agitation, cardiovascular effects, sympathomimetic syndromes, hallucinations, and psychoses. One possible treatment is the use of a vaccine to block or attenuate adverse medical effects.

Translating antibody-binding peptides into peptoid ligands with improved affinity and stability.

A great number of protein-binding peptides are known and utilized as drugs, diagnostic reagents, and affinity ligands. Recently, however, peptide mimetics have been proposed as valuable alternative to peptides by virtue of their excellent biorecognition activity and higher biochemical stability. This poses the need to develop a strategy for translating known protein-binding peptides into peptoid analogues with comparable or better affinity.

Potent and Selective Tetrahydroisoquinoline Kappa Opioid Receptor Antagonists of Lead Compound (3 R)-7-Hydroxy- N-[(1 S)-2-methyl-1-(piperidin-1-ylmethyl)propyl]-1,2,3,4-tetrahydroisoquinoline-3-carboxamide (PDTic).

Past studies have shown that it has been difficult to discover and develop potent and selective κ opioid receptor antagonists, particularly compounds having potential for clinical development. In this study, we present a structure-activity relationship (SAR) study of a recently discovered new class of tetrahydroisoquinoline κ opioid receptor antagonists which led to (3 R)-7-hydroxy- N-{(1 S)-2-methyl-1-[(-4-methylpiperidine-1-yl)methyl]propyl}-1,2,3,4-tetrahydroisoquinoline-3-carboxamide (12) (4-Me-PDTic). Compound 12 had a K = 0.

Potent and Selective Tetrahydroisoquinoline Kappa Opioid Receptor Antagonists of Lead Compound (3 R)- N-[1 R)-1-(Cyclohexylmethyl)-2-methylpropyl]-7-hydroxy-1,2,3,4-tetrahydroisoquinoline-3-carboxamide (CDTic).

Animal pharmacological studies suggest that potent and selective κ opioid receptor antagonists have potential as pharmacotherapies targeting depression, anxiety, and substance abuse (opiates, alcohol, nicotine, cocaine). We recently reported lead compound 1 as a new class of κ opioid receptor antagonists with only one basic amine group. Analogues were synthesized and evaluated for their in vitro opioid receptor antagonist properties using a [S]GTPγS binding assay.

Simple Tetrahydroisoquinolines Are Potent and Selective Kappa Opioid Receptor Antagonists.

Potent and selective κ opioid receptor antagonists have been derived from the -substituted -3,4-dimethyl-4-(3-hydroxyphenyl)piperidine class of pure opioid receptor antagonists. In order to determine if the 3-hydroxyphenyl and/or the piperidine amino groups are required for obtaining the pure opioid antagonists, (3)-7-hydroxy--[(1)-2-methyl-1-(piperidine-1-ylmethyl)propyl]-1,2,3,4-tetrahydroiosquinoline-3-carboxamide (), which does not have a 4-(3-hydroxyphenyl) group, and (3)--(1)-1-(cyclohexylmethyl)-2-methylpropyl]-7-hydroxy-1,2,3,4-tetrahydroisoquinoline-3-carboxamide (), which does not have a 4-hydroxylphenyl or a piperidine amino group, were synthesized and evaluated for their [S]GTPγS binding properties at the μ, δ, and κ opioid receptors. Surprisingly compound remained a pure opioid antagonist with a = 6.

Design, Synthesis, and Biological Evaluation of Structurally Rigid Analogues of 4-(3-Hydroxyphenyl)piperidine Opioid Receptor Antagonists.

In order to gain additional information concerning the active conformation of the N-substituted trans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidine (1) class of opioid receptor antagonists, procedures were developed for the synthesis of structurally rigid N-substituted-6-(3-hydroxyphenyl)3-azabicyclo[3.1.0]hexane and 3-methyl-4-(3-hydroxyphenyl)-4-azabicyclo[4.

Design, synthesis, and pharmacological evaluation of JDTic analogs to examine the significance of replacement of the 3-hydroxyphenyl group with pyridine or thiophene bioisosteres.

The potent and selective KOR antagonist JDTic was derived from the N-substituted trans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidine class of pure opioid antagonists. In previous studies we reported that compounds that did not have a hydroxyl on the 3-hydroxyphenyl group and did not have methyl groups at the 3- and 4-position of the piperidine ring were still potent and selective KOR antagonists. In this study we report JDTic analogs 2, 3a-b, 4a-b, and 5, where the 3-hydroxyphenyl ring has been replaced by a 2-, 3-, or 4-pyridyl or 3-thienyl group and do not have the 3-methyl or 3,4-dimethyl groups, remain potent and selective KOR antagonists.

Design, synthesis, and pharmacological evaluation of JDTic analogs to examine the significance of the 3- and 4-methyl substituents.

The design and discovery of JDTic as a potent and selective kappa opioid receptor antagonist used the N-substituted trans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidine pharmacophore as the lead structure. In order to determine if the 3-methyl or 4-methyl groups were necessary in JDTic and JDTic analogs for antagonistic activity, compounds 4a-c, and 4d-f which have either the 3-methyl or both the 3- and 4-methyl groups removed, respectively, from JDTic and analogs were synthesized and evaluated for their in vitro opioid receptor antagonist activities using a [(35)S]GTPγS binding assay. Other ADME properties were also assessed for selected compounds.

Design, synthesis, and biological evaluation of (3R)-1,2,3,4-tetrahydro-7-hydroxy-N-[(1S)-1-[[(3R,4R)-4-(3-hydroxyphenyl)-3,4-dimethyl-1-piperidinyl]methyl]-2-methylpropyl]-3-isoquinolinecarboxamide (JDTic) analogues: in vitro pharmacology and ADME profile.

JDTic analogues 4-15 which have the hydroxyl groups replaced with other groups were synthesized and their in vitro efficacy at the μ, δ, and κ opioid receptors determined and compared to JDTic using [(35)S]GTPγS assays. Compounds 4, 5, 6, 13, 14, and 15 had Ke = 0.024, 0.

Effect of the 3- and 4-methyl groups on the opioid receptor properties of N-substituted trans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidines.

N-substituted trans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidines (2a,b) are opioid receptor antagonists where the antagonist properties are not due to the type of N-substituent. In order to gain a better understanding of the contribution that the 3- and 4-methyl groups make to the pure antagonist properties of 2a,b, we synthesized analogues of 2a,b that lacked the 4-methyl (5a,b), 3-methyl (6a,b), and both the 3- and 4-methyl group (7a,b) and compared their opioid receptor properties. We found that (1) all N-methyl and N-phenylpropyl substituted compounds were nonselective opioid antagonists (2) all N-phenylpropyl analogues were more potent than their N-methyl counterparts, and (3) compounds 2a,b which have both a 3- and 4-methyl substituent, were more potent antagonists than analogues 5a,b, 6a,b, and 7a,b.

Discovery of N-{4-[(3-hydroxyphenyl)-3-methylpiperazin-1-yl]methyl-2-methylpropyl}-4-phenoxybenzamide analogues as selective kappa opioid receptor antagonists.

There is continuing interest in the discovery and development of new κ opioid receptor antagonists. We recently reported that N-substituted 3-methyl-4-(3-hydroxyphenyl)piperazines were a new class of opioid receptor antagonists. In this study, we report the syntheses of two piperazine JDTic-like analogues.

Assessment and use of two silicon carbide multi-well plates for library synthesis and proteolytic digests using microwave heating.

The use of two silicon carbide plates is reported for the preparation of three libraries of organic molecules using microwave heating. In addition, a preliminary study has been carried out, showing that one of the plates can also be used in a proteomics setting. Both the 24-position and 48-position plates heated evenly when irradiated with microwave energy.

FerriBRIGHT: a rationally designed fluorescent probe for redox active metals.

The novel catechol-BODIPY dyad, 8-(3,4-dihydroxyphenyl)-2,6-bis(ethoxycarbonyl)-1,3,5,7-tetramethyl-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (FerriBRIGHT) was rationally designed with the aid of computational methods. FerriBRIGHT could be prepared by standard one-pot synthesis of BODIPY fluorophores from 3,4-bis(benzyloxy)benzaldehyde (1) and 3,5-dimethyl-4-(ethoxycarbonyl)pyrrole (3); however, isolating the dipyrrin intermediate 8-[3,4-bis(benzyloxy)phenyl]-2,6-bis(ethoxycarbonyl)-1,3,5,7-tetramethyl-4,4-diaza-s-indacene (7) prior to reaction with excess BF(3).OEt(2) led to marked improvements in the isolated overall yield of the desired compound.

Flash column chromatograms estimated from thin-layer chromatography data.

Given a sample mass and TLC data, a spreadsheet has been developed that provides information on the amount of silica gel needed, the optimal fraction size, and the degree of separation to be expected before flash chromatography is attempted. The spreadsheet is the first utility of its kind to accurately estimate the retention volume and band volume of analytes, as well as the fraction numbers expected to contain each analyte, and the resolution between adjacent peaks. This information allows users to select optimal parameters for preparative-scale separations before the flash column itself is attempted; ensuring a successful first separation.

Preparation of nonsymmetrically substituted stilbenes in a one-pot two-step heck strategy using ethene as a reagent.

We present here a strategy for the preparation of nonsymmetrically substituted stilbenes using a one-pot two-step double Heck strategy. First a protocol is developed for the selective preparation of a range of styrenes using ethene as the alkene coupling partner. Then conditions are found for the effective coupling of the styrenes with aryl halides using a 1:1 stoichiometric ratio of the two components.

Alkoxycarbonylation of aryl iodides using gaseous carbon monoxide and pre-pressurized reaction vessels in conjunction with microwave heating.

The microwave-promoted alkoxycarbonylation of aryl iodides using reaction vessels pre-pressurized with carbon monoxide is reported. Reactions are performed using 0.1 mol% palladium acetate as catalyst, DBU as base and are complete within 20-30 min.