Exploring the Association Between Third Molar Agenesis and Carabelli Traits: A Cross-Sectional Study.

Dental agenesis is the congenital absence of at least one tooth and has been associated with several other developmental dental conditions, such as morphological dental alterations and Carabelli trait. This study sought to investigate whether third molar agenesis is associated with Carabelli traits in permanent molars. : This was a cross-sectional study that used a convenience sample obtained from the orthodontic records of German patients.

Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes.

This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al.

Er,Cr:YSGG and 980nm diode lasers influence dentin surface volume after cariogenic challenge: in vitro study.

This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.

Effects of natural products-based dentifrices on acrylic resin for denture bases: A simulated period of 4 years.

Purpose: To evaluate the antimicrobial activity of dentifrices based on Malva sylvestris and propolis and the effect on the acrylic resin.

Methods: The inhibitory effect against Candida albicans, Enterococcus faecalis and Streptococcus mutans was determined. The specimens of resin were divided into groups: Control (brushing with distilled water); brushing with Colgate; brushing with Protex; brushing with Malvatricin, brushing with Proporalcare Dental Gel and brushing with Green Propolis Dental Gel.

Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients.

Background: The present study aimed to assess the frequency and variation of 13 nonmetric dental crown traits (NDCT) in permanent and primary molars in German orthodontic patients.

Methods: Dental records from orthodontic patients were screened and evaluated. First and second permanent and primary upper and lower molars (from left and right sides) were assessed.

Is There Variation in the Morphology of the Frontal Sinus in Individuals with Different Craniofacial Patterns? A Systematic Review with Meta-Analysis.

To evaluate differences in the morphology of the frontal sinus in adolescents and adults with different craniofacial patterns, searches up to April 2024 were conducted in six databases and other information sources to identify observational studies. Study selection, data extraction, and quality assessment using the NOS scale were performed independently by two reviewers. Random effects meta-analyses were conducted to estimate the difference in frontal sinus measurements between different craniofacial skeletal patterns (α = 0.

Effect of silver vanadate on the antibiofilm, adhesion and biocompatibility properties of denture adhesive.

To evaluate the biological and mechanical properties of an adhesive with nanostructured silver vanadate (AgVO). Specimens in poly(methyl methacrylate) (PMMA) were treated with Ultra Corega Cream (UCCA) denture adhesive with or without AgVO. Biofilms of , and were grown and the viable cells counted.

Exploring the association between PITX2, third molars agenesis and sella turcica morphology : PITX2, third molars agenesis and sella turcica morphology.

Objectives: PITX2 is required for mammalian development and single nucleotide polymorphisms (SNPs) in this gene could be involved in dental agenesis and sella turcica patterns. Thus, the present study evaluated the association between SNPs in PITX2, third molars agenesis and sella turcica phenotypes.

Materials And Methods: The sample consisted of healthy orthodontic German patients with lateral cephalometric radiographs with clearly visualization of the sella turcica, and dental orthopantomograms.

Prevalence and local causes for retention of primary teeth and the associated delayed permanent tooth eruption.

Background: This study aimed to evaluate the prevalence of retained primary teeth (RPT) associated with delayed permanent tooth eruption and the factors associated with this condition in German children.

Methods: This is a cross-sectional retrospective study that evaluated panoramic radiographs from orthodontic patients. The diagnosis of RPT was established according to Nolla developmental stage.

Association between craniofacial patterns and third molar agenesis in orthodontic patients.

Purpose: Third molar agenesis (TMA) is the most common craniofacial anomaly and has been associated with craniofacial patterns in different populations. Therefore, the aim of this retrospective cross-sectional study was to assess a possible association between craniofacial patterns and TMA in German orthodontic patients.

Methods: Patients undergoing orthodontic treatment with dental records including anamnesis, pretreatment lateral cephalograms and orthopantomograms were evaluated.

Effect of conventional and rolled cigarette smoke on the colour of artificial teeth and effectiveness of hygiene protocols in removing pigmentation - An study.

Context: Artificial teeth are widely used in oral rehabilitation. Despite the benefits, they are more susceptible to colour changes, causing aesthetic problems.

Aims: To evaluate the effect of conventional cigarette and straw smoke on the colour of artificial teeth and the effectiveness of hygiene protocols in removing pigmentation.

Effect of the Case for Carpule as a Visual Passive Distraction Tool on Dental Fear and Anxiety: A Pilot Study.

The present cross-over study aimed to evaluate the effect of a visual passive distraction tool, a case for carpule, in the management of fear and anxiety during invasive dental treatment. Children between the ages of 4 and 8 years that need at least two treatments with inferior alveolar nerve block were selected. All the included children received two treatments at different moments: in one treatment, local anesthesia was performed with a visual passive distraction tool, the crocodile case, for carpule (experimental); in the other treatment, local anesthesia was performed without the device (control).

Laser irradiation prevents root caries: Microhardness and scanning electron microscopy analysis.

Context: A promising option for the prevention of dental caries is the use of laser irradiation.

Aims: Evaluate the effects of Er:YAG, Nd:YAG, and CO laser irradiation, associated or not to 2% sodium fluoride (2% NaF), on root caries prevention.

Material And Methods: One hundred and four human root dentin samples were divided in eight groups (n = 13).

Single Nucleotide Polymorphisms in Is Associated with Persistent Primary Tooth and Delayed Permanent Tooth Eruption.

Persistent primary tooth (PPT) is a prevalent clinical condition that occurs when a primary tooth is over-retained beyond the established period of its normal exfoliation time, remaining in the oral cavity. Many factors could be involved in the risk of PPT; therefore, the aim of this study was to evaluate if single nucleotide polymorphisms (SNPs) in the gene are associated with PPT. Children undergoing orthodontic treatment were screened.

Effects of Different Forms of Denture Adhesives on Biofilm Formation, Adhesive Strength and Hygiene of Complete Dentures.

Purpose: To evaluate the effect of different forms of denture adhesives on the formation of biofilm and on adhesive strength, as well as the effectiveness of hygiene protocols for their removal.

Materials And Methods: Samples of the heat-cured polymethyl methacrylate denture base resin were made and divided into four groups: control (no adhesive), ultra Corega cream, Corega strip adhesive, and ultra Corega powder (GlaxoSmithKline). Biofilm formation was evaluated by counting colony-forming units and fluorescence microscopy.

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges.

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A).

Clinical evaluation of the immediate masking effect of enamel white spot lesions treated with an infiltrant resin.

The aim of this study was to evaluate, in vivo, the immediate masking effect of white spot lesions (WSLs) treated with an infiltrant resin (IR). The investigation was conducted on 40 young adolescent and adult patients (11 to 23 years old) who presented with at least one permanent maxillary or mandibular anterior tooth with active WSLs on the enamel (ICDAS score 2). Before resin infiltration, the color of both the WSLs and the sound adjacent enamel (SAE) was evaluated by a digital spectrophotometer (CIELab).

Influence of Er,Cr:YSGG laser on dentin acid resistance after erosive challenge.

Purpose: To evaluate the influence of the Er,Cr:YSGG laser with or without the 5% fluoride varnish on the acid resistance of dentin after erosive challenge.

Methods: 36 incisors were selected and sectioned, obtaining 72 specimens of 4 mm × 4 mm and randomly divided into eight groups (n = 9). In G1: application of Er,Cr:YSGG (0.

Influence of Er,Cr:YSGG laser, associated or not to desensitizing agents, in the prevention of acid erosion in bovine root dentin.

This in vitro study evaluated the influence of the Er,Cr:YSGG laser, associated or not to desensitizing agents, in the prevention of acid erosion in bovine root dentin. Eighty dentin specimens were selected and divided into eight groups (n = 10): G1: negative control; G2: positive control (5% fluoride varnish-FV); G3: Er,Cr:YSGG laser; G4: FV + laser; G5: 3% potassium oxalate; G6: 3% potassium oxalate + laser; G7: biphasic calcium silicate/phosphate gel (gel); G8: gel + laser. Laser parameters: 0.

Surface treatment of implant materials with antimicrobial nanoparticulates.

This study analyzed nanostructured silver vanadate (AgVO3) films on certain substrate surfaces found in dental implant devices in order to see if these films promote antimicrobial activity. Enamel and glaze vehicles were used to apply the nanomaterial (0.0% [control], 2.

Evaluation of Surface Roughness and Bacterial Adhesion on Tooth Enamel Irradiated With High Intensity Lasers.

The aim was to evaluate the surface roughness and bacterial adhesion on enamel irradiated with high intensity lasers, associated or not to a fluoride varnish. Eighty fragments of bovine enamel were equally divided in 8 groups (n=10). Group 1 was not treated and Group 2 received only a 5% fluoride varnish application.

Mechanical properties of silorane-based and methacrylate-based composite resins after artificial aging.

The aim of this study was to compare the compressive strength of a silorane-based composite resin (Filtek P90) to that of conventional composite resins (Charisma, Filtek Z250, Fill Magic, and NT Premium) before and after accelerated artificial aging (AAA). For each composite resin, 16 cylindrical specimens were prepared and divided into 2 groups. One group underwent analysis of compressive strength in a universal testing machine 24 hours after preparation, and the other was subjected first to 192 hours of AAA and then the compressive strength test.

Analyzing the Influence of a New Dental Implant Design on Primary Stability.

Background: The macrogeometry of dental implants strongly influences the primary stability and hence the osseointegration process.

Purpose: Compare the performance of conventional and modified implant models in terms of primary stability.

Materials And Methods: A total of 36 implants (Neodent®) with two different formats (n = 18): Alvim CM (Conical CM, Ø 4.