PolyQ length-based molecular encoding of vocalization frequency in FOXP2.

The transcription factor FOXP2, a regulator of vocalization- and speech/language-related phenotypes, contains two long polyQ repeats (Q and Q) displaying marked, still enigmatic length variation across mammals. We found that the Q/Q length ratio quantitatively encodes vocalization frequency ranges, from the infrasonic to the ultrasonic, displaying striking convergent evolution patterns. Thus, species emitting ultrasonic vocalizations converge with bats in having a low ratio, whereas species vocalizing in the low-frequency/infrasonic range converge with elephants and whales, which have higher ratios.

ZnO tetrapod morphology influence on UV sensing properties.

The aim of this work was to investigate how ZnO tetrapod (ZnO-T) morphology, structure, and surface charge properties (i.e. Debye length) influence their UV sensing properties, shedding light on the underlying photoresponse mechanisms.

Low-Dimensional Structures for Smart Materials and Composites: Preparation, Properties and Applications.

The Special Issue covers low-dimensional structures or systems with reduced spatial dimensions, resulting in unique properties. The classification of these materials according to their dimensionality (0D, 1D, 2D, etc.) emerged from nanoscience and nanotechnology.

Combined DFT-D3 Computational and Experimental Studies on g-CN: New Insight into Structure, Optical, and Vibrational Properties.

Graphitic carbon nitride (g-CN) has emerged as one of the most promising solar-light-activated polymeric metal-free semiconductor photocatalysts due to its thermal physicochemical stability but also its characteristics of environmentally friendly and sustainable material. Despite the challenging properties of g-CN, its photocatalytic performance is still limited by the low surface area, together with the fast charge recombination phenomena. Hence, many efforts have been focused on overcoming these drawbacks by controlling and improving the synthesis methods.

Corrigendum: Alpha-synuclein oligomers alter the spontaneous firing discharge of cultured midbrain neurons.

[This corrects the article DOI: 10.3389/fncel.2023.

Alpha-synuclein oligomers alter the spontaneous firing discharge of cultured midbrain neurons.

The aim of this work was to monitor the effects of extracellular α-synuclein on the firing activity of midbrain neurons dissociated from substantia nigra TH-GFP mice embryos and cultured on microelectrode arrays (MEA). We monitored the spontaneous firing discharge of the network for 21 days after plating and the role of glutamatergic and GABAergic inputs in regulating burst generation and network synchronism. Addition of GABA , AMPA and NMDA antagonists did not suppress the spontaneous activity but allowed to identify three types of neurons that exhibited different modalities of firing and response to applied L-DOPA: high-rate (HR) neurons, low-rate pacemaking (LR-p), and low-rate non-pacemaking (LR-np) neurons.

Functional Piezoresistive Polymer Composites Based on CO Laser-Irradiated Graphene Oxide-Loaded Polyurethane: Morphology, Structure, Electrical and Piezoresistive Properties.

Nanocomposite materials have recently attracted great attention for their wide range of applications, such as in smart materials, flexible electronics, and deformation sensing applications. Such materials make it possible to combine a polymer with functional fillers. In this study, flexible artificial leathers, exhibiting insulating properties and containing 1.

Bioelectrochemical platform with human monooxygenases: FMO1 and CYP3A4 tandem reactions with phorate.

It is highly advantageous to devise an in vitro platform that can predict the complexity of an in vivo system. The first step of this process is the identification of a xenobiotic whose monooxygenation is carried out by two sequential enzymatic reactions. Pesticides are a good model for this type of tandem reactions since in specific cases they are initially metabolised by human flavin-containing monooxygenase 1 (hFMO1), followed by cytochrome P450 (CYP).

Multifunctional Nanomaterials for Energy Applications.

In the last few decades, global energy requirements have grown exponentially, and increased demand is expected in the upcoming decades [...

Design, Characterization and Applications of Functional Nanomaterials.

Nanomaterials are commonly defined as particles existing in nature or artificially manufactured materials that have one or more external dimensions in the 1-100 nm range [...

Graphene and Other 2D Layered Nanomaterials and Hybrid Structures: Synthesis, Properties and Applications.

The field of two-dimensional (2D) layered nanomaterials, their hybrid structures, and composite materials has been suddenly increasing since 2004, when graphene-almost certainly the most known 2D material-was successfully obtained from graphite via mechanical exfoliation [...

Thermal, Morphological, Electrical Properties and Touch-Sensor Application of Conductive Carbon Black-Filled Polyamide Composites.

Polyamide 66 (PA66) is a well-known engineering thermoplastic polymer, primarily employed in polymer composites with fillers and additives of different nature and dimensionality (1D, 2D and 3D) used as alternatives to metals in various technological applications. In this work, carbon black (CB), a conductive nanofiller, was used to reinforce the PA66 polymer in the 9-27 wt. % CB loading range.

Sustainable mechanochemical synthesis of β-cyclodextrin polymers by twin screw extrusion.

Cyclodextrin nanosponges (CD-NS) are cross-linked cyclodextrin polymers characterized by a nanostructured three-dimensional network. CD-NSs in the last years found many different applications in the pharmaceutical field for the controlled release of drugs and for the absorption of undesired substances from physiological media, food, and wastewater. Most of CD-NS syntheses involve the solubilization of the chosen CD in closed batch, using a suitable organic polar aprotic liquid, which may affect potential environmental or biomedical applications.

Multifunctional Conductive Paths Obtained by Laser Processing of Non-Conductive Carbon Nanotube/Polypropylene Composites.

Functional materials are promising candidates for application in structural health monitoring/self-healing composites, wearable systems (smart textiles), robotics, and next-generation electronics. Any improvement in these topics would be of great relevance to industry, environment, and global needs for energy sustainability. Taking into consideration all these aspects, low-cost fabrication of electrical functionalities on the outer surface of carbon-nanotube/polypropylene composites is presented in this paper.

Effect of Injection Molding Conditions on Crystalline Structure and Electrical Resistivity of PP/MWCNT Nanocomposites.

Polypropylene (PP) / multi-walled carbon nanotube (MWCNT) nanocomposites were prepared by melt-mixing and used to manufacture samples by injection molding. The effect of processing conditions on the crystallinity and electrical resistivity was studied. Accordingly, samples were produced varying the mold temperature and injection rate, and the DC electrical resistivity was measured.

Polyserine repeats promote coiled coil-mediated fibril formation and length-dependent protein aggregation.

Short polyserine (polyS) repeats are frequently found in proteins and longer ones are produced in neurological disorders such as Huntington disease (HD) owing to translational frameshifting or non-ATG-dependent translation, together with polyglutamine (polyQ) and polyalanine (polyA) repeats, forming intracellular aggregates. However, the physiological and pathological structures of polyS repeats are not clearly understood. Early studies highlighted their structural versatility, similar to other homopolymers whose conformation is influenced by the surrounding protein context.

From biowaste to magnet-responsive materials for water remediation from polycyclic aromatic hydrocarbons.

Composted urban biowaste-derived substances (BBS-GC) are used as carbon sources for the preparation of carbon-coated magnet-sensitive nanoparticles obtained via co-precipitation method and the subsequent thermal treatment at 550 °C under nitrogen atmosphere. A multitechnique approach has been applied to investigate the morphology, magnetic properties, phase composition, thermal stability of the obtained magnet-sensitive materials. In particular, pyrolysis-induced modifications affecting the BBS-GC/carbon shell were highlighted.

Few-Layer MoS₂ Nanodomains Decorating TiO₂ Nanoparticles: A Case Study for the Photodegradation of Carbamazepine.

S-doped TiO₂ and hybrid MoS₂/TiO₂ systems have been synthesized, via the sulfidation with H₂S of the bare TiO₂ and of MoO supported on TiO₂ systems, with the aim of enhancing the photocatalytic properties of TiO₂ for the degradation of carbamazepine, an anticonvulsant drug, whose residues and metabolites are usually inefficiently removed in wastewater treatment plants. The focus of this study is to find a relationship between the morphology/structure/surface properties and photoactivity. The full characterization of samples reveals the strong effects of the H₂S action on the properties of TiO₂, with the formation of defects at the surface, as shown by transmission electron microscopy (TEM) and infrared spectroscopy (IR), while also the optical properties are strongly affected by the sulfidation treatment, with changes in the electronic states of TiO₂.

Carbon Domains on MoS/TiO System via Catalytic Acetylene Oligomerization: Synthesis, Structure, and Surface Properties.

Carbon domains have been obtained at the surface of a MoS/TiO (Evonik, P25) system via oligomerization and cyclotrimerization reactions involved in the interaction of the photoactive material with acetylene. Firstly, MoS nanosheets have been synthesized at the surface of TiO, via sulfidation of a molybdenum oxide precursor with HS (bottom-up method). Secondly, the morphology and the structure, the optical and the vibrational properties of the obtained materials, for each step of the synthesis procedure, have been investigated by microscopy and spectroscopy methods.

Resonance Raman and IR spectroscopy of aligned carbon nanotube arrays with extremely narrow diameters prepared with molecular catalysts on steel substrates.

Carbon nanotubes (CNTs) are considered promising for a large range of emerging technologies ranging from advanced electronics to utilization as nanoreactors. Here we report a controlled facile synthesis of aligned carbon nanotubes with very small dimensions directly grown on steel grid substrates via two-step catalytic chemical vapor deposition (CCVD) of a molecular catalyst (ferrocene) with ethylene as the carbon source. The system is characterized by resonance Raman spectroscopy and the results show single walled carbon nanotube (SWCNT) arrays composed of 0.

Early Alterations of Hippocampal Neuronal Firing Induced by Abeta42.

We studied the effect of Amyloid β 1-42 oligomers (Abeta42) on Ca2+ dependent excitability profile of hippocampal neurons. Abeta42 is one of the Amyloid beta peptides produced by the proteolytic processing of the amyloid precursor protein and participates in the initiating event triggering the progressive dismantling of synapses and neuronal circuits. Our experiments on cultured hippocampal network reveal that Abeta42 increases intracellular Ca2+ concentration by 46% and inhibits firing discharge by 19%.

Multi-walled carbon nanotubes directly induce epithelial-mesenchymal transition in human bronchial epithelial cells via the TGF-β-mediated Akt/GSK-3β/SNAIL-1 signalling pathway.

Background: Multi-walled carbon nanotubes (MWCNT) are currently under intense toxicological investigation due to concern on their potential health effects. Current in vitro and in vivo data indicate that MWCNT exposure is strongly associated with lung toxicity (inflammation, fibrosis, granuloma, cancer and airway injury) and their effects might be comparable to asbestos-induced carcinogenesis. Although fibrosis is a multi-origin disease, epithelial-mesenchymal transition (EMT) is recently recognized as an important pathway in cell transformation.

MoS2 Nanoparticles Decorating Titanate-Nanotube Surfaces: Combined Microscopy, Spectroscopy, and Catalytic Studies.

MoS2/TNTs composites have been obtained by impregnation of titanate nanotubes (TNTs) with a centrifuged solution of nanosized MoS2 particles in isopropyl alcohol (IPA). The characterization has been performed by combining UV-vis-NIR, Raman, AFM, and HRTEM analyses, before and after impregnation. HRTEM images show that the contact between single-layer MoS2 nanoparticles and the support is efficient, so justifying the decoration concept.

Association of polyalanine and polyglutamine coiled coils mediates expansion disease-related protein aggregation and dysfunction.

The expansion of homopolymeric glutamine (polyQ) or alanine (polyA) repeats in certain proteins owing to genetic mutations induces protein aggregation and toxicity, causing at least 18 human diseases. PolyQ and polyA repeats can also associate in the same proteins, but the general extent of their association in proteomes is unknown. Furthermore, the structural mechanisms by which their expansion causes disease are not well understood, and these repeats are generally thought to misfold upon expansion into aggregation-prone β-sheet structures like amyloids.

The role of iron impurities in the toxic effects exerted by short multiwalled carbon nanotubes (MWCNT) in murine alveolar macrophages.

Lung toxicity mediated by multiwalled carbon nanotubes (MWCNT) has been widely demonstrated and recently associated with induction of carcinogenic asbestos-like effects, but the chemical features that drive this toxic effect have still not been well elucidated. The presence of metals as trace contaminants during MWCNT preparation, in particular iron (Fe) impurities, plays an important role in determining a different cellular response to MWCNT. Our goal was to clarify the mechanisms underlying MWCNT-induced toxicity with correlation to the presence of Fe impurities by exposing murine alveolar macrophages to two different MWCNT samples, which differed only in the presence or absence of Fe.