Adding Biomolecular Recognition Capability to 3D Printed Objects.

Three-dimensional (3D) printing technologies will impact the biosensor community in the near future, at both the sensor prototyping level and the sensing layer organization level. The present study aimed at demonstrating the capacity of one 3D printing technique, digital light processing (DLP), to produce hydrogel sensing layers with 3D shapes that are unattainable using conventional molding procedures. The first model of the sensing layer was composed of a sequential enzymatic reaction (glucose oxidase and peroxidase), which generated a chemiluminescent signal in the presence of glucose and luminol.

Development and Validation of a Fully Automated Platform for Extended Blood Group Genotyping.

Thirty-five blood group systems, containing >300 antigens, are listed by the International Society of Blood Transfusion. Most of these antigens result from a single nucleotide polymorphism. Blood group typing is conventionally performed by serology.

Paramagnetic nanoparticles to track and quantify in vivo immune human therapeutic cells.

This study aims to investigate gadolinium-based nanoparticles (Gd-HNP) for in vitro labeling of human plasmacytoid dendritic cells (HuPDC) to allow for in vivo tracking and HuPDC quantifying using magnetic resonance imaging (MRI) following parenteral injection. Human plasmacytoid DC were labeled (LabHuPDC) with fluorescent Gd-HNP (Gd-FITC-HNP) and injected via intraperitoneal and intravenous routes in 4-5 NOD-SCID β2m(-/-)mice (treated mice = TM). Control mice (CM) were similarly injected with unlabeled HuPDC.

Polymer adhesive surface as flexible generic platform for multiplexed assays biochip production.

The present report describes the integration and application possibilities of a new microarray concept based on adhesive surface. The method was shown to enable the straightforward production of 384 and 1536-well plates modified with 100 and 25 spots per well, respectively. Such in-well densities were only possible thanks to the fabrication process which implies first the deposition of the microarray on a flat adhesive surface and then its assembly with bottomless 384 or 1536-well plates.

Impact of immobilization support on colorimetric microarrays performances.

We report here a comparison of support materials for colorimetric hybridization assays on microarrays. Four surfaces with various chemistries and architectures (roughness and porosity) were evaluated: (i) bare and (ii) activated polystyrene surfaces classically used for ELISA; (iii) a double-sided adhesive support; and (iv) a porous nitrocellulose/cellulose acetate membrane. Each substrate was functionalized with a microarray of probes and subjected to an enzymatic colorimetric DNA hybridization test.

Adhesive microarrays for multipurpose diagnostic tools.

We are reporting here a new technology for the straightforward production of integrated microarrays. The approach is based on the use of adhesive supports enabling (i) the immobilization of biomolecules as microarrays (up to 2500 spots per cm(2)) and (ii) the easy assembly of these microarrays with complex 3D structures such as 96-well bottomless microplates or polymer and glass microfluidic networks. The analytical performances of the system were demonstrated for sandwich protein detection (C-reactive protein) and hybridization assays, both in classical 96-well microplate format and microfluidic environment.

Polyshrink™ based microfluidic chips and protein microarrays.

A new approach for the rapid production of microfluidic chips integrating protein spots is described. The technology, called "Print-n-Shrink", is based on the screen-printing of a microfluidic design (using a dielectric ink) onto Polyshrink™ polystyrene sheets. The initial printing which have a minimum size of 15 μm (height)×230 μm (width) was thermally treated (30s, 163°C) to shrink and generate features of 85 μm (height)×100 μm (width).

"Print-n-Shrink" technology for the rapid production of microfluidic chips and protein microarrays.

An innovative method for the production of microfluidic chips integrating protein spots is described. The technology, called "Print-n-Shrink", is based on the screen-printing of a microfluidic design (using a dielectric ink) onto Polyshrink polystyrene sheets. The initial print which has a minimum size of 15 microm (height) x 230 microm (width) is thermally treated (30 seconds, 163 degrees C) to shrink and generate features of 85 microm (height) x 100 microm (width).

Aryl diazonium for biomolecules immobilization onto SPRi chips.

A method for the immobilization of proteins at the surface of surface plasmon resonance imaging (SPRi) chips is presented. The technology, based on the electro-deposition of a 4-carboxymethyl aryl diazonium (CMA) monolayer is compared to a classical thioctic acid self-assembled monolayer. SPRi live recording experiments followed by the quantification of the diazonium surface coverage demonstrate the presence of a monolayer of electro-deposited molecules (11*10(12) molecules mm(-2)).

"Macromolecules to PDMS transfer" as a general route for PDMS biochips.

"Macromolecules to PDMS transfer" technique relying on the direct entrapment of macromolecules spots during PDMS polymerisation is proposed as an alternative for the easy and simple PDMS surface modification. In the present work, the development of three different applications based on this procedure is presented as proof of the method potentialities. First, C-reactive protein (CRP) sandwich immunoassay using immobilised monoclonal anti-CRP antibodies was developed for sepsis diagnosis.