A review of foot finite element modelling for pressure ulcer prevention in bedrest: Current perspectives and future recommendations.

Pressure ulcers (PUs) are a major public health challenge, having a significant impact on healthcare service and patient quality of life. Computational biomechanical modelling has enhanced PU research by facilitating the investigation of pressure responses in subcutaneous tissue and skeletal muscle. Extensive work has been undertaken on PUs on patients in the seated posture, but research into heel ulcers has been relatively neglected.

An evaluation of dermal microcirculatory occlusion under repeated mechanical loads: Implication of lymphatic impairment in pressure ulcers.

Objective: Pressure ulcers are caused by prolonged mechanical loads deforming the underlying soft tissues. However, the mechanical loads for microcirculatory occlusion are unknown. The present study was designed to characterize the simultaneous response of microvascular and lymphatic structures under repeated mechanical loading.

There is an individual tolerance to mechanical loading in compression induced deep tissue injury.

Background: Deep tissue injury is a type of pressure ulcer which originates subcutaneously due to sustained mechanical loading. The relationship between mechanical compression and damage development has been extensively studied in 2D. However, recent studies have suggested that damage develops beyond the site of indentation.

Magnetic resonance elastography of skeletal muscle deep tissue injury.

The current state-of-the-art diagnosis method for deep tissue injury in muscle, a subcategory of pressure ulcers, is palpation. It is recognized that deep tissue injury is frequently preceded by altered biomechanical properties. A quantitative understanding of the changes in biomechanical properties preceding and during deep tissue injury development is therefore highly desired.

MRI based 3D finite element modelling to investigate deep tissue injury.

Pressure ulcers occur due to sustained mechanical loading. Deep tissue injury is a severe type of pressure ulcer, which is believed to originate in subcutaneous tissues adjacent to bony prominences. In previous experimental-numerical studies the relationship between internal tissue state and damage development was investigated using a 2D analysis.

An advanced magnetic resonance imaging perspective on the etiology of deep tissue injury.

Early diagnosis of deep tissue injury remains problematic due to the complicated and multifactorial nature of damage induction and the many processes involved in damage development and recovery. In this paper, we present a comprehensive assessment of deep tissue injury development and remodeling in a rat model by multiparametric magnetic resonance imaging (MRI) and histopathology. The tibialis anterior muscle of rats was subjected to mechanical deformation for 2 h.

Adaptation of a MR imaging protocol into a real-time clinical biometric ultrasound protocol for persons with spinal cord injury at risk for deep tissue injury: A reliability study.

Background: High strain in soft tissues that overly bony prominences are considered a risk factor for pressure ulcers (PUs) following spinal cord impairment (SCI) and have been computed using Finite Element methods (FEM). The aim of this study was to translate a MRI protocol into ultrasound (US) and determine between-operator reliability of expert sonographers measuring diameter of the inferior curvature of the ischial tuberosity (IT) and the thickness of the overlying soft tissue layers on able-bodied (AB) and SCI using real-time ultrasound.

Material And Methods: Part 1: Fourteen AB participants with a mean age of 36.

3D Fiber Orientation in Atherosclerotic Carotid Plaques.

Atherosclerotic plaque rupture is the primary trigger of fatal cardiovascular events. Fibrillar collagen in atherosclerotic plaques and their directionality are anticipated to play a crucial role in plaque rupture. This study aimed assessing 3D fiber orientations and architecture in atherosclerotic plaques for the first time.

Cytokine IL1α and lactate as markers for tissue damage in spineboard immobilisation. A prospective, randomised open-label crossover trial.

Background: Spinal immobilisation using a rigid long spineboard is a well-established procedure in trauma care. During immobilisation, the body is exposed to high tissue-interface pressures. This may lead to a localised inflammatory response of the skin, which may be used to monitor the body's response to different types of immobilisation device.

Computationally Designed 3D Printed Self-Expandable Polymer Stents with Biodegradation Capacity for Minimally Invasive Heart Valve Implantation: A Proof-of-Concept Study.

The evolution of minimally invasive implantation procedures and the remodeling potential of decellularized tissue-engineered heart valves require stents with growth capacity to make these techniques available for pediatric patients. By means of computational tools and 3D printing technology, this proof-of-concept study demonstrates the design and manufacture of a polymer stent with a mechanical performance comparable to that of conventional nitinol stents used for heart valve implantation in animal trials. A commercially available 3D printing polymer was selected, and crush and crimping tests were conducted to validate the results predicted by the computational model.

Understanding the requirements of self-expandable stents for heart valve replacement: Radial force, hoop force and equilibrium.

A proper interpretation of the forces developed during stent crimping and deployment is of paramount importance for a better understanding of the requirements for successful heart valve replacement. The present study combines experimental and computational methods to assess the performance of a nitinol stent for tissue-engineered heart valve implantation. To validate the stent model, the mechanical response to parallel plate compression and radial crimping was evaluated experimentally.

A MRI-Compatible Combined Mechanical Loading and MR Elastography Setup to Study Deformation-Induced Skeletal Muscle Damage in Rats.

Deformation of skeletal muscle in the proximity of bony structures may lead to deep tissue injury category of pressure ulcers. Changes in mechanical properties have been proposed as a risk factor in the development of deep tissue injury and may be useful as a diagnostic tool for early detection. MRE allows for the estimation of mechanical properties of soft tissue through analysis of shear wave data.

On the importance of 3D, geometrically accurate, and subject-specific finite element analysis for evaluation of in-vivo soft tissue loads.

Pressure ulcers are a type of local soft tissue injury due to sustained mechanical loading and remain a common issue in patient care. People with spinal cord injury (SCI) are especially at risk of pressure ulcers due to impaired mobility and sensory perception. The development of load improving support structures relies on realistic tissue load evaluation e.

Predicting the optimal geometry of microneedles and their array for dermal vaccination using a computational model.

Microneedle arrays have been developed to deliver a range of biomolecules including vaccines into the skin. These microneedles have been designed with a wide range of geometries and arrangements within an array. However, little is known about the effect of the geometry on the potency of the induced immune response.

Penetration and delivery characteristics of repetitive microjet injection into the skin.

Drugs can be delivered transdermally using jet injectors, which can be an advantageous route compared to oral administration. However, these devices inject large volumes deep into the skin or tissues underneath the skin often causing bruising and pain. This may be prevented by injecting smaller volumes at lower depth in a repetitive way using a microjet injection device.

Cell death induced by mechanical compression on engineered muscle results from a gradual physiological mechanism.

Deep tissue injury (DTI), a type of pressure ulcer, arises in the muscle layers adjacent to bony prominences due to sustained mechanical loading. DTI presents a serious problem in the clinic, as it is often not visible until reaching an advanced stage. One of the causes can be direct mechanical deformation of the muscle tissue and cell.

A theoretical compartment model for antigen kinetics in the skin.

The skin is a promising location for vaccination with its abundant population of antigen capturing and presenting cells. The development of new techniques, such as the use of microneedles, can facilitate the delivery of vaccines into the skin. In recent years, many different types of microneedle arrays have been designed.

A new method to evaluate the effects of shear on the skin.

Currently, pressure ulcer preventive strategies focus mainly on pressure redistribution. Little attention is paid to reduce the harmful effects of shear-force, because little is known about pathophysiological aspects of shear-force. Even today, no method to measure the effects of shear-force on the skin is available.

Diffusion profile of macromolecules within and between human skin layers for (trans)dermal drug delivery.

Delivering a drug into and through the skin is of interest as the skin can act as an alternative drug administration route for oral delivery. The development of new delivery methods, such as microneedles, makes it possible to not only deliver small molecules into the skin, which are able to pass the outer layer of the skin in therapeutic amounts, but also macromolecules. To provide insight into the administration of these molecules into the skin, the aim of this study was to assess the transport of macromolecules within and between its various layers.

Local anisotropic mechanical properties of human carotid atherosclerotic plaques - characterisation by micro-indentation and inverse finite element analysis.

Biomechanical models have the potential to predict failure of atherosclerotic plaques and to improve the risk assessment of plaque rupture. The applicability of these models depends strongly on the used material models. Current biomechanical models employ isotropic material models, although it is generally accepted that plaque tissue behaves highly anisotropic.

Pressure induced deep tissue injury explained.

The paper describes the current views on the cause of a sub-class of pressure ulcers known as pressure induced deep tissue injury (DTI). A multi-scale approach was adopted using model systems ranging from single cells in culture, tissue engineered muscle to animal studies with small animals. This has led to a clear understanding on two damage mechanisms associated with the development of DTI.

Developing a pressure ulcer risk factor minimum data set and risk assessment framework.

Aim: To agree a draft pressure ulcer risk factor Minimum Data Set to underpin the development of a new evidenced-based Risk Assessment Framework.

Background: A recent systematic review identified the need for a pressure ulcer risk factor Minimum Data Set and development and validation of an evidenced-based pressure ulcer Risk Assessment Framework. This was undertaken through the Pressure UlceR Programme Of reSEarch (RP-PG-0407-10056), funded by the National Institute for Health Research and incorporates five phases.

Vascular elastography: a validation study.

Vascular elastography techniques are promising tools for mechanical characterization of diseased arteries. These techniques are usually validated with simulations or phantoms or by comparing results with histology or other imaging modalities. In the study described here, vascular elastography was applied to porcine aortas in vitro during inflation testing (n = 10) and results were compared with those of standard bi-axial tensile testing, a technique that directly measures the force applied to the tissue.