Publications by authors named "Catherine E McCusker"

Ruthenium(II) polypyridyl complexes [Ru(CN-Me-bpy)(bpy)] (CN-Me-bpy = 4,4'-dicyano-5,5'-dimethyl-2,2'-bipyridine, bpy = 2,2'-bipyridine, and = 1-3, abbreviated as , , and ) undergo four () or five ( and ) successive one-electron reduction steps between -1.3 and -2.75 V versus ferrocenium/ferrocene (Fc/Fc) in tetrahydrofuran.

View Article and Find Full Text PDF

Photocatalysis is a promising method to harness solar energy and use it to form fuels and other high-value chemicals, but most sensitizers used in photocatalytic reactions are complexes of rare and expensive metals such as ruthenium and iridium. Zinc dipyrromethene complexes have potential to be a more earth-abundant alternative, but their photophysical properties are largely unexplored. In this study, triplet state formation was quantified in two zinc dipyrromethene complexes, with and without heavy atoms, by transient absorption spectroscopy.

View Article and Find Full Text PDF

Ultrafast time-resolved electronic and infrared absorption measurements have been carried out on a series of Ru(II) polypyridyl complexes in an effort to delineate the dynamics of vibrational relaxation in this class of charge transfer chromophores. Time-dependent density functional theory calculations performed on compounds of the form [Ru(CN-Me-bpy) (bpy)] ( x = 1-3 for compounds 1-3, respectively, where CN-Me-bpy is 4,4'-dicyano-5,5'-dimethyl-2,2'-bipyridine and bpy is 2,2'-bipyridine) reveal features in their charge-transfer absorption envelopes that allow for selective excitation of the Ru(II)-(CN-Me-bpy) moiety, the lowest-energy MLCT state(s) in each compound of the series. Changes in band shape and amplitude of the time-resolved differential electronic absorption data are ascribed to vibrational cooling in the CN-Me-bpy-localized MLCT state with a time constant of 8 ± 3 ps in all three compounds.

View Article and Find Full Text PDF

A computationally inspired Cu(I) metal-to-ligand charge transfer (MLCT) chromophore, [Cu(sbmpep)] (sbmpep = 2,9-di(sec-butyl)-3,8-dimethyl-4,7-di(phenylethynyl)-1,10-phenanthroline), was synthesized in seven total steps, prepared from either dichloro- or dibromophenanthroline precursors. Complete synthesis, structural characterization, and electrochemistry, in addition to static and dynamic photophysical properties of [Cu(sbmpep)], are reported on all relevant time scales. UV-Vis absorption spectroscopy revealed significant increases in oscillator strength along with a concomitant bathochromic shift in the MLCT absorption bands with respect to structurally related model complexes (ε = 16 500 M cm at 491 nm).

View Article and Find Full Text PDF

When designing photoresponsive materials, the impact of a polymer host matrix on the photophysical and photochemical properties of chromophores can be dramatic and advantageous for correlating macromolecular properties. Some compounds possess changes in their photophysical response with variation in the surrounding media (e.g.

View Article and Find Full Text PDF

In the interest of expanding the inventory of available long lifetime, photochemically robust, and strongly reducing Cu(I) MLCT sensitizers, we present detailed structural, photophysical, and electrochemical characterization of [Cu(dipp)], dipp = 2,9-diisopropyl-1,10-phenanthroline, and its sterically encumbered tetramethyl analogue [Cu(diptmp)], diptmp = 2,9-diisopropyl-3,4,7,8-tetramethyl-1,10-phenanthroline. The achiral isopropyl substituents enable similar steric bulk effects to the previously investigated sec-butyl substituents while eliminating the complex NMR structural analyses associated with the presence of two chiral centers in the latter. The photophysical properties of [Cu(diptmp)] are impressive, possessing a 2.

View Article and Find Full Text PDF

This review features recent experimental work focused on the preparation and characterization of materials that integrate photochemical upconversion derived from sensitized triplet-triplet annihilation, resulting in the conversion of low energy photons to higher energy light, thereby enabling numerous wavelength-shifting applications. Recent topical developments in upconversion include encapsulating or rigidifying fluid solutions to give them mechanical strength, adapting inert host materials to enable upconversion, and using photoactive materials that incorporate the sensitizer and/or the acceptor. The driving force behind translating photochemical upconversion from solution into hard and soft materials is the incorporation of upconversion into devices and other applications.

View Article and Find Full Text PDF

This treatment highlights the historical development of MLCT sensitizers in photochemical upconversion while indentifying current state-of-the-art and exciting opportunities in this arena moving towards the future.

View Article and Find Full Text PDF

The current investigation compares the photochemical upconversion sensitization properties of two long lifetime Cu(I) metal-to-ligand charge transfer (MLCT) chromophores to 3 distinct anthryl-based triplet acceptors. The sensitizers [Cu(dsbtmp)2](PF6) (1, dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline) and [Cu(dsbp)2](PF6) (2, dsbp = 2,9-di(sec-butyl-1,10-phenanthroline) were selectively excited in the presence of anthracene, 9,10-diphenylanthracene (DPA), and 9,10-dimethylanthracene (DMA) in degassed dichloromethane solutions. In all instances, triplet energy transfer was observed from selective excitation of the Cu(I) MLCT chromophore to each respective anthryl species.

View Article and Find Full Text PDF

Subpicosecond through supra-nanosecond transient absorption dynamics of the homoleptic Cu(I) metal-to-ligand charge transfer (MLCT) photosensitizers including the benchmark [Cu(dmp)2](+) (dmp =2,9-dimethyl-1,10-phenanthroline) chromophore, as well as [Cu(dsbp)2](+) (dsbp =2,9-di(sec-butyl)-1,10-phenanthroline and [Cu(dsbtmp)2](+) (dsbtmp =2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline) were investigated in dichloromethane and tetrahydrofuran solutions. Visible and near-IR spectroelectrochemical measurements of the singly reduced [Cu(dsbp)2](+) and [Cu(dsbtmp)2](+) species were determined in tetrahydrofuran, allowing for the identification of redox-specific phenanthroline-based radical anion spectroscopic signatures prevalent in the respective transient absorption experiments. This study utilized four different excitation wavelengths (418, 470, 500, and 530 nm) to elucidate dynamics on ultrafast times scales spanning probe wavelengths ranging from the UV to the near-IR (350 to 1450 nm).

View Article and Find Full Text PDF

The synthesis, structural characterization, and excited-state dynamics of series of diketopyrrolopyrrole (DPP) bridged homodinuclear Ir(III) and heterodinuclear Ir(III)/Pt(II) complexes is described. Steady-state and time-resolved photoluminescence along with transient absorption measurements were used to probe the nature of the emissive and long-lived excited states. Upon excitation into the (1)DPP ligand-localized excited state in the presence of coordinated Ir(III) or Pt(II) metal centers, the intersystem crossing is enhanced, leading to a quenching of the (1)DPP fluorescence and the formation of the long-lived (τ ≈ 30-40 μs) (3)DPP excited state in all instances.

View Article and Find Full Text PDF

Identification of transient species is a necessary part of delineating the kinetics and mechanisms associated with chemical dynamics; when dealing with photo-induced processes, this can be an exceptionally challenging task due to the fact that spectra associated with excited state(s) sampled over the course of a photochemical event often cannot be uniquely identified nor readily calculated. Using Group 8 complexes of the general form [M(terpy)2](2+) and [M(bpy)3](2+) as a platform (where terpy is 2,2':6',2''-terpyridine and bpy is 2,2'-bipyridine), we demonstrate how spectroelectrochemical measurements can serve as an effective tool for identifying spectroscopic signatures of charge-transfer excited states of transition metal-based chromophores. Formulating the metal-to-ligand charge-transfer (MLCT) excited state(s) as M(3+)-L(-), the extent to which a linear combination of the spectra of the oxidized and reduced forms of the parent complexes can be used to simulate the characteristic absorptions of MLCT-based transient species is examined.

View Article and Find Full Text PDF

Covalently linking two square planar platinum(II) centers using two pyrazolate bridging ligands allows the filled dz(2) orbitals on each Pt center to overlap, producing a Pt-Pt σ interaction and new low energy dσ* → π* metal-metal-to-ligand charge transfer (MMLCT) transitions terminating on an appropriate π-acceptor ligand such as 2-phenylpyridine (ppy). In an effort to extend the lifetime of the associated MMLCT excited state, we decided to append piperidinyl naphthalimide (PNI) chromophores to the 2-phenylpyridine charge transfer ligands. This structural modification introduces low-lying PNI-based triplet states serving as long-lived triplet population reservoirs, thermally capable of repopulating the charge transfer state at room temperature (RT), thereby extending its excited state lifetime.

View Article and Find Full Text PDF

The Cu(I) metal-to-ligand charge-transfer complex, [Cu(dsbtmp)2](+) (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), exhibits outstanding stability as a visible-light-absorbing photosensitizer in hydrogen-evolving homogeneous photocatalysis. In concert with the Co(dmgH)2(py)Cl water reduction catalyst and N,N-dimethyl-p-toluidine sacrificial donor in 1:1 H2O:CH3CN, this Cu(I) sensitizer remains active even after 5 days of visible-light-pumped (λex = 452 ± 10 nm) hydrogen evolution catalysis. Deuteration studies illustrate that the hydrogen produced from this composition does indeed originate from aqueous protons.

View Article and Find Full Text PDF

The synthesis, X-ray structures, photophysical, and electrochemical characterization of mono- (1) and dinuclear (2) cationic iridium(III) complexes bearing a 2,5-dipyridylpyrazine (2,5-dpp) ancillary ligand are reported. Upon the complexation of a first equivalent of iridium, the photoluminescence shifts markedly into the deep red (λem = 710 nm, ΦPL = 0.9%) compared to other cationic iridium complexes such as [Ir(ppy)2(bpy)]PF6.

View Article and Find Full Text PDF

Electronic structure and photophysical properties have been investigated for a new series of fluorinated iridium complexes with the parent [Ir(ppy)2(deeb)](PF6) (deeb is 4,4'-diethylester-2,2'-bipyridine). Time resolved infrared spectroscopy (TRIR) has been used to observe the long-lived triplet excited state of each complex confirming its mixed charge transfer character. Supplementary evidence of charge transfer in the triplet state is provided via emission spectroscopy, transient absorption spectroscopy, and density functional theory (DFT) calculations.

View Article and Find Full Text PDF

A new homoleptic Cu(I) photosensitizer, [Cu(dsbtmp)2](+) (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), designed to exhibit cooperative steric hindrance, unexpectedly produced strong photoluminescence (Φ = 1.9-6.3%) and long excited state lifetimes (τ = 1.

View Article and Find Full Text PDF

A synthetically facile and earth abundant Cu(I) metal-to-ligand charge transfer sensitizer was successfully incorporated into two distinct photochemical upconversion schemes, affording red-to-green and orange-to-blue wavelength conversions.

View Article and Find Full Text PDF

Square feat: The synthesis, isolation, and characterization of five novel bisterpyridine-based metallomacrocycles, possessing a folded tetrameric configuration is reported (see figure). The initial dimeric building block with the stable linear {tpy-Ru(II)-tpy} connectivity circumvents the formation of the thermodynamically favored molecular triangles.

View Article and Find Full Text PDF

Triplet state photophysics has been generated in two distinct diketopyrrolopyrrole (DPP) chromophores terminated with either phenyl (1) or thienyl (2) spacers, when sandwiched between two Ir(III) complexes using bipyridyl linkers. Upon coordination of the bpy-DPP-bpy subunit resulting in its planarization, the π-conjugation in the DPP chromophore formally extends and was manifested as a substantial red shift in the absorption and fluorescence profiles of 1 and 2. Low energy excitation of these dinuclear metal complexes produced strongly quenched singlet fluorescence, generated quite intense long-lived (τ ∼ 3 μs) absorption transients in the red, sensitized (1)O(2) photoluminescence centered at 1270 nm in aerated solutions, and yielded low temperature near-IR phosphorescence in 1 centered at 950 nm.

View Article and Find Full Text PDF

The synthesis, electrochemistry, and photophysical behavior of a Pt(II) terpyridyl perylenediimide (PDI) acetylide (1) charge-transfer complex is reported. The title compound exhibits strong (ε ≈ 5 × 10(4) M(-1)cm(-1)) low-energy PDI acetylide-based π-π* absorption bands in the visible range extending to 600 nm, producing highly quenched singlet fluorescence (Φ = 0.014 ± 0.

View Article and Find Full Text PDF

The synthesis and photophysics of a new Re(I)-carbonyl diimine complex, Re(PNI-phen)(CO)(3)Cl, where the PNI-phen is N-(1,10-phenanthroline)-4-(1-piperidinyl)naphthalene-1,8-dicarboximide is reported. The metal-to-ligand charge transfer (MLCT) emission lifetime was increased approximately 3000-fold at room temperature with respect to that of the model complex [Re(phen)(CO)(3)Cl] as a result of thermal equilibrium between the emissive (3)MLCT state and a long-lived triplet ligand-centered ((3)LC) state on the PNI chromophore. This represents the longest excited state lifetime (τ = 651 μs) that has ever been observed for a Re(I)-based CT photoluminescence at room temperature.

View Article and Find Full Text PDF

A series of ruthenium complexes having the general form [Ru(bpy)(3-n)(CN-Me-bpy)(n)](PF(6))(2) (where bpy = 2,2'-bipyridine, CN-Me-bpy = 4,4'-dicyano-5,5'-dimethyl-2,2'-bipyridine, and n = 1-3 for complexes 1-3, respectively) have been synthesized and characterized using a variety of steady-state and nanosecond time-resolved spectroscopies. Electrochemical measurements indicate that the CN-Me-bpy ligand is significantly easier to reduce than the unsubstituted bipyridine (on the order of ∼500 mV), implying that the lowest energy (3)MLCT (metal-to-ligand charge transfer) state will be associated with the CN-Me-bpy ligand(s) in all three compounds. Comparison of the Huang-Rhys factors derived from spectral fitting analyses of the steady state emission spectra of complexes 1-3 suggests all three compounds are characterized by excited-state geometries that are less distorted relative to their ground states as compared to [Ru(bpy)(3)](PF(6))(2); the effect of the more nested ground- and excited-state potentials is reflected in the unusually high radiative quantum yields (13% (1), 27% (2), and 40% (3)) and long (3)MLCT-state room-temperature lifetimes (1.

View Article and Find Full Text PDF