Determination of trace metal speciation parameters by using screen-printed electrodes in stripping chronopotentiometry without deaerating.

The objective of this study was to exploit the advantages of stripping chronopotentiometry (SCP) and stripping chronopotentiometry at scanned deposition potential (SSCP) for trace metal speciation analyses by using thin-film mercury screen-printed electrodes (TMF-SPE). At first, the SCP parameters were optimised for TMF-SPE, in order to reach the complete depletion regime. It has been shown that a stripping current higher than or equal to 10 μA allows this regime to be attained without removing oxygen from the solution.

Determination of the correlation between physical measurements of roughness, optical properties, and perception of frosted glass surfaces.

Chemical frosting is used as a surface decorating method by many glass package producers. After immersion in an acid frosting bath, glass items present the desired frosted effect. The perception of this particular effect is due to the formation of a microscopic crystalline pattern on the glass surface, which scatters light passing through the glass surface.

Development of analytical procedures for the determination of hexavalent chromium in corrosion prevention coatings used in the automotive industry.

The European directive 2000/53/EC limits the use of Cr(VI) in vehicle manufacturing. Although a maximum of 2 g of Cr(VI) was authorised per vehicle for corrosion prevention coatings of key components, since July 2007 its use has been prohibited except for some particular applications. Therefore, the objective of this work was to develop direct analytical procedures for Cr(VI) determination in the different steel coatings used for screws.

Ferrate(VI) oxidation of cyanide in water.

Experiments were conducted to test removal of cyanide (free cyanide and several cyanide complexes) in water, under alkaline medium (pH > or = 11), by a new potassium ferrate salt. The removal rate of free cyanide by oxidation with Fe(VI) was greater at pH 11.0 than at pH 12.

Development of analytical procedures for determination of total chromium by quadrupole ICP-MS and high-resolution ICP-MS, and hexavalent chromium by HPLC-ICP-MS, in different materials used in the automotive industry.

A European directive was recently adopted limiting the use of hazardous substances such as Pb, Hg, Cd, and Cr(VI) in vehicle manufacturing. From July 2003 a maximum of 2 g Cr(VI) will be authorised per vehicle in corrosion-preventing coatings of key components. As no standardised procedures are available to check if produced vehicles are in agreement with this directive, the objective of this work was to develop analytical procedures for total chromium and Cr(VI) determination in these materials.

Solubility and disintegration of zinc phosphate cement.

The mechanism of erosion of a zinc phosphate cement was studied using two experimental procedures: discs of dental cement were immersed in distilled water under unrenewed conditions as defined by ISO standard; or discs were immersed under continuously running distilled water to simulate the oral environment. Both experiments revealed no physical disintegration mechanism, and suggest that erosion is only controlled by dissolution.