Rare-Earth Iron Garnet Superlattices with Sub-unit Cell Composition Modulation.

Oxide superlattices reveal a rich array of emergent properties derived from the composition modulation and the resulting lattice distortion, charge transfer, and symmetry reduction that occur at the interfaces between the layers. The great majority of studies have focused on perovskite oxide superlattices, revealing, for example, the appearance of an interfacial 2D electron gas, magnetic moment, or improper ferroelectric polarization that is not present in the parent phases. Garnets possess greater structural complexity than perovskites: the cubic garnet unit cell contains 160 atoms with the cations distributed between three different coordination sites, and garnets exhibit a wide range of useful properties, including ferrimagnetism and ion transport.

Temperature-Dependent Surface Anisotropy in (110) Epitaxial Rare Earth Iron Garnet Films.

Ferrimagnetic oxide thin films are important material platforms for spintronic devices. Films grown on low symmetry orientations such as (110) exhibit complex anisotropy landscapes that can provide insight into novel phenomena such as spin-torque auto-oscillation and spin superfluidity. Using spin-Hall magnetoresistance measurements, the in-plane (IP) and out-of-plane (OOP) uniaxial anisotropy energies are determined for a thickness series (5-50 nm) of europium iron garnet (EuIG) and thulium iron garnet (TmIG) films epitaxially grown on a gadolinium gallium substrate with (110) orientation and capped with Pt.

Self-Assembly of Hierarchical Silicon-Containing Block Copolymers with Cross-Linkable 3 nm Smectic Motifs for Nanopatterning and Osmotic Energy Conversion Membranes.

Highly-dense small-feature-size nanopatterns and nanoporous membranes are important in advanced microelectronics, nanofiltration, and biomimic device manufacturing. Here, we report the synthesis and self-assembly of a series of high-interaction-parameter (high-χ) silicon-containing hierarchical block copolymers (BCPs) with cross-linkable subordering chalcone motifs, which possess both an intrinsic native etching contrast for nanofabrication and cross-linkability under ultraviolet light for generating free-standing membranes. BCPs with a volume fraction of chalcone block of 55-74% form ordered primary nanostructures with period 15-22 nm including lamellae, double gyroid, hexagonally packed cylinders, and body-centered cubic spheres of the minority Si-containing block.

Atomic order of rare earth ions in a complex oxide: a path to magnetotaxial anisotropy.

Complex oxides offer rich magnetic and electronic behavior intimately tied to the composition and arrangement of cations within the structure. Rare earth iron garnet films exhibit an anisotropy along the growth direction which has long been theorized to originate from the ordering of different cations on the same crystallographic site. Here, we directly demonstrate the three-dimensional ordering of rare earth ions in pulsed laser deposited (EuTm)FeO garnet thin films using both atomically-resolved elemental mapping to visualize cation ordering and X-ray diffraction to detect the resulting order superlattice reflection.

Temperature Evolution of Magnon Propagation Length in TmFeO Thin Films: Roles of Magnetic Anisotropy and Gilbert Damping.

The magnon propagation length, ⟨ξ⟩, of a ferro-/ferrimagnet (FM) is one of the key factors that controls the generation and propagation of thermally driven magnonic spin current in FM/heavy metal (HM) bilayer based spincaloritronic devices. For the development of a complete physical picture of thermally driven magnon transport in FM/HM bilayers over a wide temperature range, it is of utmost importance to understand the respective roles of temperature-dependent Gilbert damping (α) and effective magnetic anisotropy () in controlling the temperature evolution of ⟨ξ⟩. Here, we report a comprehensive investigation of the temperature-dependent longitudinal spin Seebeck effect (LSSE), radio frequency transverse susceptibility, and broad-band ferromagnetic resonance measurements on TmFeO (TmIG)/Pt bilayers grown on different substrates.

Damping and Interfacial Dzyaloshinskii-Moriya Interaction in Thulium Iron Garnet/Bismuth-Substituted Yttrium Iron Garnet Bilayers.

Thin films of ferrimagnetic iron garnets can exhibit useful magnetic properties, including perpendicular magnetic anisotropy (PMA) and high domain wall velocities. In particular, bismuth-substituted yttrium iron garnet (BiYIG) films grown on garnet substrates have a low Gilbert damping but zero Dzyaloshinskii-Moriya interaction (DMI), whereas thulium iron garnet (TmIG) films have higher damping but a nonzero DMI. We report the damping and DMI of thulium-substituted BiYIG (BiYTmIG) and TmIG|BiYIG bilayer thin films deposited on (111) substituted gadolinium gallium garnet and neodymium gallium garnet (NGG) substrates.

Directed Self-Assembly of Oxide Nanocomposites by Ion-Beam Lithography.

Vertically aligned self-assembled nanocomposite films have provided a unique platform to study magnetoelectric effects and other forms of coupling between complex oxides. However, the distribution in the locations and sizes of the phase-separated nanostructures limits their utility. In this work, we demonstrate a process to template the locations of the self-assembled structure using ion lithography, which is effective for general insulating substrates.

Erratum: Large Anomalous Frequency Shift in Perpendicular Standing Spin Wave Modes in BiYIG Films Induced by Thin Metallic Overlayers [Phys. Rev. Lett. 130, 126703 (2023)].

This corrects the article DOI: 10.1103/PhysRevLett.130.

First-principles based Monte Carlo modeling of the magnetization of oxygen-deficient Fe-substituted SrTiO.

Transition-metal (TM) substituted SrTiO has attracted much attention because its magnetism and/or ferroelectricity can be tuned cation substitution, point defects, strain and/or oxygen deficiency. For example, Goto [, , 024006 (2017)] reported the magnetization of SrTiFeO (STF) grown under different oxygen pressures and on various substrates. Here, we use hybrid density functional theory to calculate the effects of different oxygen vacancy (V) states in STF on the magnetization for a variety of Fe cation arrangements.

Reversible Morphology Locking via Metal Infiltration in a Block Copolymer.

Metal infiltration from an acid solution of a metal precursor into the poly(2-vinylpyridine) (P2VP) microdomains of a polystyrene--P2VP block copolymer is shown to reduce the uptake of solvent vapor during a subsequent solvent annealing process, locking the morphology of the self-assembled microdomains. The amount of metal, here Pt, incorporated into the P2VP increases with both metal precursor [PtCl] and hydrochloric acid concentrations, reaching 0.83 Pt atom per pyridine unit.

Coherent magnon-induced domain-wall motion in a magnetic insulator channel.

Advancing the development of spin-wave devices requires high-quality low-damping magnetic materials where magnon spin currents can efficiently propagate and effectively interact with local magnetic textures. Here we show that magnetic domain walls can modulate spin-wave transport in perpendicularly magnetized channels of Bi-doped yttrium iron garnet. Conversely, we demonstrate that the magnon spin current can drive domain-wall motion in the Bi-doped yttrium iron garnet channel device by means of magnon spin-transfer torque.

Revealing Site Occupancy in a Complex Oxide: Terbium Iron Garnet.

Complex oxide films stabilized by epitaxial growth can exhibit large populations of point defects which have important effects on their properties. The site occupancy of pulsed laser-deposited epitaxial terbium iron garnet (TbIG) films with excess terbium (Tb) is analyzed, in which the terbium:iron (Tb:Fe)ratio is 0.86 compared to the stoichiometric value of 0.

Large Anomalous Frequency Shift in Perpendicular Standing Spin Wave Modes in BiYIG Films Induced by Thin Metallic Overlayers.

Interface-driven effects on magnon dynamics are studied in magnetic insulator-metal bilayers using Brillouin light scattering. It is found that the Damon-Eshbach modes exhibit a significant frequency shift due to interfacial anisotropy generated by thin metallic overlayers. In addition, an unexpectedly large shift in the perpendicular standing spin wave mode frequencies is also observed, which cannot be explained by anisotropy-induced mode stiffening or surface pinning.

Emergence of layered nanoscale mesh networks through intrinsic molecular confinement self-assembly.

Block copolymer self-assembly is a powerful tool for two-dimensional nanofabrication; however, the extension of this self-assembly concept to complex three-dimensional network structures is limited. Here we report a simple method to experimentally generate three-dimensional layered mesh morphologies through intrinsic molecular confinement self-assembly. We designed triblock bottlebrush polymers with two Janus domains: one perpendicular and one parallel to the polymer backbone.

Experimental and Computational Evaluation of Self-Assembled Morphologies in Diblock Janus Bottlebrush Copolymers.

Diblock Janus-type "A--B" bottlebrush copolymers (di-JBBCPs) consist of a backbone with alternating A and B side chains, in contrast to the side chain arrangement of conventional bottlebrush copolymers. As a result, A and B blocks of di-JBBCPs can microphase-separate perpendicular to the backbone, which is located at the interface between the two blocks. A reparametrized dissipative particle dynamics (DPD) model is used to theoretically investigate the self-assembly of di-JBBCPs and to compare with the experimental results of a range of polystyrene--polydimethylsiloxane di-JBBCPs.

Selective sequential infiltration synthesis of ZnO in the liquid crystalline phase of silicon-containing rod-coil block copolymers.

The combination of block copolymer (BCP) thin film self-assembly and selective infiltration synthesis of inorganic materials into one BCP block provides access to various organic-inorganic hybrids. Here, we apply sequential infiltration synthesis, a vapor-phase hybridization technique, to selectively introduce ZnO into the organic microdomains of silicon-containing rod-coil diblock copolymers and a triblock terpolymer, polydimethylsiloxane (PDMS)--poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS--PMPCS) and PDMS--polystyrene--PMPCS (PDMS--PS--PMPCS), in which the PMPCS rod block is a liquid crystalline polymer. The in-plane cylindrical PDMS--PMPCS and core-shell cylindrical and hexagonally perforated lamellar PDMS--PS--PMPCS films were infiltrated with ZnO with high selectivity to the PMPCS.

Discovering functional motifs in long noncoding RNAs.

Long noncoding RNAs (lncRNAs) are products of pervasive transcription that closely resemble messenger RNAs on the molecular level, yet function through largely unknown modes of action. The current model is that the function of lncRNAs often relies on specific, typically short, conserved elements, connected by linkers in which specific sequences and/or structures are less important. This notion has fueled the development of both computational and experimental methods focused on the discovery of functional elements within lncRNA genes, based on diverse signals such as evolutionary conservation, predicted structural elements, or the ability to rescue loss-of-function phenotypes.

Antigen unmasking does not improve the visualization of phospholipase C zeta in human spermatozoa.

Phospholipase C zeta (PLCζ) is a sperm-specific protein that triggers oocyte activation. The analysis of PLCζ expression in human spermatozoa can be used as a diagnostic marker for oocyte activation deficiency. Our laboratory has previously optimized a standard "in-house" assay to determine PLCζ expression in human spermatozoa.

Selective Deposition of Copper on Self-Assembled Block Copolymer Surfaces Physical Vapor Deposition.

Block copolymer (BCP) self-assembly produces chemically and topographically patterned surfaces which are used to guide the formation of Cu nanostructures by exploiting differences in the mobility of vapor-deposited species on each microdomain. Cu metal films a few nm thick were deposited on three different BCP surfaces self-assembled from poly(styrene--methyl methacrylate) (PS--PMMA) and polystyrene--poly(2-vinylpyridine) (PS--P2VP). For PS--PMMA, the effects of chemical heterogeneity dominate over the effects of the 2 nm peak-to-valley topography, and sputtered Cu preferentially wets the PS block.

Metallic Nanomeshes Fabricated by Multimechanism Directed Self-Assembly.

The directed self-assembly of block copolymers (BCPs) is a powerful motif for the continued scaling of feature sizes for nanoscale devices. A multimechanism directed self-assembly (MMDSA) method is described that generates orthogonal meshes from a polystyrene--poly-2-vinylpyridine BCP that is subsequently metallized with Pt. The MMDSA process takes advantage of three different mechanisms, trench wall guidance, edge nucleation, and underlayer guidance, to align the mesh with respect to substrate features.

GTP Cyclohydrolase I as a Potential Drug Target: New Insights into Its Allosteric Modulation via Normal Mode Analysis.

Guanosine triphosphate (GTP) cyclohydrolase I (GCH1) catalyzes the conversion of GTP into dihydroneopterin triphosphate (DHNP). DHNP is the first intermediate of the folate de novo biosynthesis pathway in prokaryotic and lower eukaryotic microorganisms and the tetrahydrobiopterin (BH4) biosynthesis pathway in higher eukaryotes. The de novo folate biosynthesis provides essential cofactors for DNA replication, cell division, and synthesis of key amino acids in rapidly replicating pathogen cells, such as , a causative agent of malaria.

An antisite defect mechanism for room temperature ferroelectricity in orthoferrites.

Single-phase multiferroic materials that allow the coexistence of ferroelectric and magnetic ordering above room temperature are highly desirable, motivating an ongoing search for mechanisms for unconventional ferroelectricity in magnetic oxides. Here, we report an antisite defect mechanism for room temperature ferroelectricity in epitaxial thin films of yttrium orthoferrite, YFeO, a perovskite-structured canted antiferromagnet. A combination of piezoresponse force microscopy, atomically resolved elemental mapping with aberration corrected scanning transmission electron microscopy and density functional theory calculations reveals that the presence of Y antisite defects facilitates a non-centrosymmetric distortion promoting ferroelectricity.

Bending Behavior and Directed Self-Assembly of Rod-Coil Block Copolymers.

The formation of zigzags, chevrons, Y-junctions, and line segments is demonstrated in thin films formed from cylindrical morphology silicon-containing conformationally asymmetric rod-coil diblock copolymers and triblock terpolymers under solvent annealing. Directed self-assembly of the block copolymers within trenches yields well-ordered cylindrical microdomains oriented either parallel or transverse to the sidewalls depending on the chemical functionalization of the sidewalls, and the location and structure of concentric bends in the cylinders is determined by the shape of the trenches. The innate etching contrast, the spontaneous sharp bends and junctions, and the range of demonstrated periodicity and line/space ratios make these conformationally asymmetric rod-coil polymers attractive for nanoscale pattern generation.

Uncovering deeply conserved motif combinations in rapidly evolving noncoding sequences.

Background: Animal genomes contain thousands of long noncoding RNA (lncRNA) genes, a growing subset of which are thought to be functionally important. This functionality is often mediated by short sequence elements scattered throughout the RNA sequence that correspond to binding sites for small RNAs and RNA binding proteins. Throughout vertebrate evolution, the sequences of lncRNA genes changed extensively, so that it is often impossible to obtain significant alignments between sequences of lncRNAs from evolutionary distant species, even when synteny is evident.

Relativistic kinematics of a magnetic soliton.

A tenet of special relativity is that no particle can exceed the speed of light. In certain magnetic materials, the maximum magnon group velocity serves as an analogous relativistic limit for the speed of magnetic solitons. Here, we drive domain walls to this limit in a low-dissipation magnetic insulator using pure spin currents from the spin Hall effect.