Micro-computed tomographic evaluation of dentinal microcracks in response to progressive taper enlargement in root canals of maxillary molars.

Aim: To investigate the development of dentinal microcracks resulting from the progressive enlargement of the buccal canals of maxillary molars with and without the MB2 canal employing instruments with the same tip and four different tapers.

Methodology: Twenty maxillary molars with (n = 10) and without (n = 10) the MB2 canal underwent micro-CT scanning. Their mesiobuccal and distobuccal canals were sequentially enlarged using nickel-titanium instruments with sizes 25/.

Do the apical limit and diameter of the instrumentation influence the extrusion of sodium hypochlorite solution? A micro-CT study.

This study evaluated the influence of the apical limit and the diameter of the instrumentation on the extrusion of the irrigating solution. Sixty human lower premolars were distributed into 5 groups according to the apical limit and diameter of the root canal instrumentation (n = 12): (G-1) R40 instrument 1 mm above the tooth length (TL) (Control); (G-1) R50 instrument 1 mm above the TL; (GF) R25 instrument at the TL; (GF) R40 instrument at the root canal length and (GF) R50 instrument at the TL. A space of 33.

Apical periodontitis as an aggravating factor for the severity of rheumatoid arthritis: An animal study.

Aim: The present study investigated the influence of apical periodontitis (AP) on the severity of rheumatoid arthritis (RA) using a Wistar rat model.

Methodology: Forty male Wistar rats were distributed across four groups (n = 10) based on the induction of RA and AP: Control, RA, AP, and RA + AP. RA was induced through two immunisations with type II collagen emulsified in incomplete Freund's adjuvant, followed by one immunisation with complete Freund's adjuvant.

Are CAD-CAM milled glass fiber posts better than prefabricated or custom glass fiber posts for endodontically treated teeth? A systematic review with meta-analysis.

Statement Of Problem: Prefabricated and custom glass fiber posts have been successfully used to reconstruct endodontically treated teeth. However, the performance of computer-aided design and computer-aided manufacture (CAD-CAM) milled glass fiber posts is unclear.

Purpose: The purpose of this systematic review with meta-analysis was to compare the fracture and bond strength and cement layer thickness of CAD-CAM milled glass fiber posts with prefabricated or custom glass fiber posts.

Effects of increasing instrument size and taper on the disinfection and shaping of mandibular incisors.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected.

Root canal dentin wear during final irrigation in endodontic retreatment with passive ultrasonic irrigation and easy clean instruments.

Context: Complementary procedures have been proposed to improve the endodontic retreatments.

Aim: The aim of this study was to evaluate, by microcomputed tomography (micro-CT), the dentin wear caused by passive ultrasonic irrigation (PUI) and easy clean (EC) instruments, when used for the final removal of filling material during endodontic retreatment.

Methods: Thirty-six mesial roots of the lower first molars were divided into four groups ( = 9), according to the final irrigation and sealer: PUI/AH Plus, EC/AH Plus, PUI/Total Fill (TF), and EC/TF.

Can the addition of surfactants to NaOCl irrigation impact on the percentage of voids of root canal filling?

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.

Chronic alcohol and nicotine consumption as catalyst for systemic inflammatory storm and bone destruction in apical periodontitis.

Aim: To assess the periapical alveolar bone pattern and the serum levels of proinflammatory cytokines, biochemical markers and metabolites in rats subjected to chronic alcohol and nicotine consumption and induced apical periodontitis.

Methodology: Twenty-eight male Wistar rats were divided into four groups: Control, Alcohol, Nicotine and Alcohol+Nicotine. The alcohol groups were exposed to self-administration of a 25% alcohol solution, while the other groups were given only filtered water.

Assessment of marginal gaps and image quality of crowns made of two different restorative materials: An in vitro study using CBCT images.

Background: The present study assessed the quality of images and the presence of marginal gaps on cone-beam computed tomography (CBCT) images of teeth restored with all-ceramic and metal-ceramic crowns and compared the gap sizes observed on CBCT images with those obtained on micro-CT images.

Methods: Thirty teeth restored with metal-ceramic and all-ceramic crowns, properly adapted and with gaps of 0.30 and 0.

Effect of the progressive taper enlargement of buccal root canals of three-rooted maxillary molars: A stepwise micro-CT study.

This study evaluated unprepared canal areas, volume of dentine removal, and dentine thickness after the progressive enlargement of the buccal canals of 22 maxillary molars, with and without the MB2, using instruments with the same tip size (0.25 mm) but 4 different tapers (0.03, 0.

Volumetric changes in root canal sealers in ex vivo and a novel animal model approach.

Aim: This study aimed to evaluate the volumetric change of root canal sealers through micro-computed tomographic analysis using a novel in vivo model and to compare the results with those obtained using an ex vivo test.

Methodology: Eighteen single-rooted teeth were cut to 5 mm length from the root apex. The root canals were uniformly enlarged and filled with EndoSequence BC Sealer or AH Plus Jet root canal sealers.

Marginal gaps and voids using two warm compaction techniques and different sealers: a micro-CT study.

Objective: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet.

Materials And Methods: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite.

pH influences the volumetric change of calcium silicate- and epoxy resin-based root canal sealers: An ex vivo micro-CT study.

This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single-rooted teeth were uniformly prepared and filled with one of the sealers. After 24-h storing, samples were scanned in a micro-CT device.

The thermoplastic techniques or single-cone technique on the quality of root canal filling with tricalcium silicate-based sealer: An integrative review.

Background: The filling of the root canal system (RCS) is an important step in endodontic treatment and aims to obtain a three-dimensional sealing of the root canal spaces to prevent bacterial contamination. For this, the selection of an appropriate sealer must be performed synchronously with the choice of the root canal filling technique. This study aims, through an integrative review, to evaluate the quality of root canal filling by comparing thermoplastic and single-cone (SC) techniques.

Photodynamic therapy for root canal disinfection in endodontics: an umbrella review.

To evaluate and synthesize the evidence from the individual reviews that evaluated the efficacy of PDT therapy in root canal disinfection by undertaking an umbrella review. The protocol of the review was registered in the PROSPERO database under number CRD42021214056. The literature search was conducted using the following electronic databases: PubMed, Scopus, Web of Science, BVS, Cochrane Database of Systematic Reviews, Embase, and Epistemonikos, from inception to July 2021.

Marginal gaps and voids of three root-end filling materials: A microcomputed tomographic study.

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer.

Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study.

Objectives: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison.

Materials And Methods: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups ( = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal.

The ability of reciprocating glide path instruments to reach the full root canal working length.

This study evaluated the ability of reciprocating glide path instruments to reach the full working length (RFWL). Thirty mesial roots of mandibular molars were matched into 2 groups (n = 15 teeth, 30 root canals), according to the system used for glide path: WaveOne Gold Glider (WOGG) and R-Pilot. The samples with fractured instruments or when it was not possible to RFWL were scanned using micro-computed tomography.

Shaping ability of two root canal instrumentation systems in oval-shaped canals: A microcomputed tomography study.

The objective was to evaluate the shaping ability of XP-endo Shaper and Mtwo systems in oval-shaped canals preparation by microcomputed tomography (micro-CT) along the entire canal. The volume, surface area and percentage of unprepared area were evaluated by image processing in entire canal and apical third (5 mm). Apical transportation and centring ability were evaluated at 3, 5 and 7 mm from the apex.

The importance of bioceramics and computed tomography in the late clinical management of a horizontal root fracture: A case report.

Root fractures resulting from dental trauma involve dentin, cementum and pulp. The present study aimed to demonstrate the importance of cone-beam computed tomography (CBTC) and bioceramics in the correct planning and intervention of a horizontal root fracture case in tooth 11 with late treatment in an 18-year-old patient. Clinical and radiographic examinations revealed tooth displacement, pain on vertical percussion and images suggestive of a horizontal root fracture.

Relationship of maxillary posterior roots to the maxillary sinus and cortical bone: a cone beam computed tomographic study.

This study evaluated the relationship between the apices of maxillary posterior teeth (second premolar, first molar, and second molar) and the maxillary sinus floor (MSF) and maxillary cortical bone (MCB). Cone beam computed tomographic (CBCT) scanning was used to analyze 1660 roots from 678 teeth and determine the shortest distance between the root apex and MSF and between the root apex and buccal and palatal cortices of maxillary bone. The root apices were classified based on their relationship to the MSF: type 1, the root apex protruded into the maxillary sinus; type 2, the root apex was from 0 mm (touching the MSF) to 1 mm below the MSF; and type 3, the root apex was greater than 1 mm below the MSF.

Antimicrobial effectiveness of grape seed extract against Enterococcus faecalis biofilm: A Confocal Laser Scanning Microscopy analysis.

This study evaluated the antimicrobial effectiveness of 6.5% Vitis vinifera grape seed extract (GSE) against Enterococcus faecalis biofilm using confocal laser scanning microscopy (CLSM). Saline solution (SS), 5.

Effect of previous irrigation with chlorhexidine on the push-out bond strength of a calcium silicate-based material.

This study evaluated the effect of previous irrigation with chlorhexidine (CHX) on the bond strength of a calcium silicate-based material, Biodentine, when used for furcal repair. Furcal perforations were produced in 30 extracted mandibular molars. Teeth were divided into 3 groups according to the irrigant used: distilled water (DW), CHX followed by DW (CHX), and CHX followed by ethylenediaminetetraacetic acid (EDTA) and DW (CHX/EDTA).

The internal root canal morphology of single-rooted mandibular canines revealed by micro-computed tomography.

Context: The lack of thorough knowledge regarding morphological and anatomical variations of the root canal system can result in failure to identify all root canals and lead to inadequate instrumentation and consequent failure of the endodontic treatment.

Aims: The aim of the study was to evaluate the anatomy of single-rooted mandibular canines using micro-computed tomography (micro-CT).

Subjects And Methods: Eighty mandibular canines were scanned by micro-CT to determine anatomic parameters: Vertucci's classification, number of lateral canals, roundness, and minor and major diameters.