On-line flow injection-cloud point preconcentration of polycyclic aromatic hydrocarbons coupled with high-performance liquid chromatography.

Cloud point methodology has been used to develop a novel preconcentration and an analytical method for polycyclic aromatic hydrocarbons (PAHs) in soil sample. The nonionic surfactant Tergitol 15-S-7 was successfully used as the surfactant-mediated extractant in both ultrasonic and microwave-assisted extractions. Over 90% of recoveries for various PAHs in soil were obtained under the optimal experimental conditions.

Investigation of the association behaviors between biliverdin and bovine serum albumin by fluorescence spectroscopy.

The interaction between biliverdin and bovine serum albumin (BSA) has been studied by steady fluorescence spectroscopy, synchronous fluorescence and resonance light scanning spectra. The binding of biliverdin to BSA quenches the tryptophan residue fluorescence and the results show that both static and dynamic quenching occur together with complex formation. The binding constant and binding sites of biliverdin to BSA at pH 7.

Determination of total bilirubin in human serum by chemiluminescence from the reaction of bilirubin and peroxynitrite.

Peroxynitrous acid (ONOOH) was produced by the on-line reaction of acidified hydrogen peroxide with nitrite in a flow system, and peroxynitrite (ONOO(-)) was generated from ONOOH in NaOH solution. A weak chemiluminescent (CL) emission was observed due to the production of singlet oxygen ( O(2)1) during the decomposition of ONOO(-). Bilirubin and its conjugate were found to enhance the CL emission of O(2)1 in a suitable micellar medium.

Enhancement in sample preconcentration by the on-line incorporation of cloud point extraction to flow injection analysis inside the chemiluminescence cell and the determination of total serum bilirubin.

The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) was previously based on the use of a cotton-packed column to entrap the analyte-containing surfactant aggregates after salt-induced CPE, and then the preconcentrated analyte was eluted into a separate detection cell for subsequent chemiluminescence (CL) detection (via the peroxyoxalate CL reaction). In the work, the on-line CPE/FIA technique was improved by the following: (1) sample preconcentration and CL detection were both carried out directly inside the collection column, thus avoiding the decrease in detection sensitivity due to sample dispersion and dilution, and (2) CL detection was performed through the reaction between nitrite and hydrogen peroxide, which is compatible with aqueous samples and should allow for chemical excitation to occur more efficiently inside the collection column. In addition to more effective sample preconcentration, the CL detection of the entrapped analytes directly inside the collection column, i.

Enantioselective quenching of room-temperature phosphorescence lifetimes of proteins: bovine and human serum albumins.

Enantioselective quenching of the room-temperature phosphorescence (RTP) lifetime of proteins was demonstrated due to the effects of various external chiral quenching agents. In the absence of quenchers, the RTP lifetimes for bovine serum albumin (BSA) and human serum albumin (HSA) were found to be 5.0 +/- 0.

Coupling of acetonitrile deproteinization and salting-out extraction with acetonitrile stacking for biological sample clean-up and the enrichment of hydrophobic compounds (porphyrins) in capillary electrophoresis.

A new sample pretreatment approach in CE was developed for concurrent biological sample clean-up and the concentration of hydrophobic compounds based on the combination of ACN deproteinization with salting-out extraction. Further enhancement in concentration detection sensitivity was achieved by coupling (offline) salting-out extraction with an online CE sample enrichment technique known as "ACN stacking". By optimizing the pH of salting-out extraction, a number of model compounds (hydrophobic porphyrins with clinical significances), i.

Fluorescence imaging of sample zone narrowing and dispersion in a glass microchip: the effects of organic solvent (acetonitrile)-salt mixtures in the sample matrix and surfactant micelles in the running buffer.

A mismatch in the EOF velocities between the sample zone and running buffer region is known to generate pressure-driven, parabolic flow profile of the sample plug in electrokinetic separation systems. In the present study, video fluorescence microscopy was employed to capture real-time dynamics of the sample plug (containing fluorescein as the probe molecule) in a discontinuous conductivity system within a glass microchip, in which the sample matrix consisted of a mixture of ACN and salt (NaCl), and the running buffer contained sodium cholate (SC) micelles as the pseudo-stationary phase (i.e.

Enantiomeric separation and quantification of ephedrine-type alkaloids in herbal materials by comprehensive two-dimensional gas chromatography.

The separation of ephedrine-type alkaloids and their enantiomers in raw herbs and commercial herbal products was investigated by carrying out enantioselective separation in the first-dimension column (containing beta-cyclodextrin as the chiral selector) of a comprehensive two-dimensional gas chromatography (GC x GC) system, whereas a polar polyethylene glycol capillary column was used for separation in the second dimension. Naturally occurring ephedrine-type alkaloids and their synthetic analogues (enantiomeric counterparts) were adequately resolved from each other, as well as from potential interference species in the sample matrix using GC x GC, whereas single column GC analysis was unable to separate all the alkaloids of interest. Detection limits in the order of 0.

Recent applications of microemulsion electrokinetic chromatography.

Compared to MEKC, the presence of a water-immiscible oil phase in the microemulsion droplets of microemulsion EKC (MEEKC) gives rise to some special properties, such as enhanced solubilization capacity and enlarged migration window, which could allow for the improved separation of various hydrophobic and hydrophilic compounds, with reduced sample pretreatment steps, unique selectivities and/or higher efficiencies. Typically, stable and optically clear oil-in-water microemulsions containing a surfactant (SDS), oil (octane or heptane), and cosurfactant (1-butanol) in phosphate buffer are employed as separation media in conventional MEEKC. However, in recent years, the applicability of reverse MEEKC (water-in-oil microemulsions) has also been demonstrated, such as for the enhanced separation of highly hydrophobic substances.

Investigation of solvent effects in capillary electrophoresis for the separation of biological porphyrin methyl esters.

The effects of organic solvents on the capillary electrophoresis (CE) separation of a number of important biological porphyrin methyl esters - six weakly basic, hydrophobic cyclic tetrapyrroles possessing two and four to eight methyl ester groups around the periphery of the porphyrin ring - were investigated in the mode of micellar electrokinetic chromatography (MEKC), microemulsion electrokinetic chromatography (MEEKC), and nonaqueous CE. In aqueous MEKC, partial separation of the six neutral porphyrin methyl esters was obtained with an organic modifier (acetonitrile) in the concentration range between 20 and 40%, in which sodium dodecyl sulfate (SDS) molecules might be present in the form of SDS micelles and/or SDS micelle-like aggregates. Relatively stable SDS micelles can be formed in nonaqueous MEKC using formamide as the separation medium, but the separation of the target analytes remained unsatisfactory.

Microemulsion and micellar electrokinetic chromatography of Hematoporphyrin D: a starting material of hematoporphyrin derivative.

An investigation of the basic factors which govern the microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatography (MEKC) separation of Hematoporphyrin D and its base hydrolysis product, hematoporphyrin derivative (HpD), was performed. These model compounds contain a complex mixture of porphyrin monomers, dimers and/or oligomers, and were utilized to gain insights into the MEEKC/micellar electrokinetic chromatography (MEKC) separation of samples containing highly lipophilic substances. For example, the organic modifier/cosurfactant (1-butanol) and/or oil phase (e.

Chromatographic and electrophoretic methods for Lingzhi pharmacologically active components.

Lingzhi is the Chinese name given to the Ganoderma family of mushrooms, which was considered the most valuable medicine in ancient China and was believed to bring longevity, due to its mysterious power of healing the body and calming the mind. Today, Lingzhi is still widely revered as a valuable health supplement and herbal medicine worldwide, as studies (mostly conducted in China, Korea, Japan and the United States) into the medicinal and nutritional values of Lingzhi revealed that it does indeed contain certain bioactive ingredients (such as triterpenes and polysaccharides) that might be beneficial for the prevention and treatment of a variety of ailments, including important diseases such as hypertension, diabetes, hepatitis, cancers, and AIDS. As research into the biological activities of Lingzhi, as well as the quality assurance and quality control of Lingzhi products, require the isolation/purification of active ingredients from Lingzhi, followed by subsequent analytical and/or preparative separations, the present review summarizes the various chromatographic and electrophoretic methods (as well as sample pretreatment methods) typically employed to achieve such extraction/separation procedures.

Separation of enantiomers in microemulsion electrokinetic chromatography using chiral alcohols as cosurfactants.

A novel chiral microemulsion, which involved the use of chiral alcohols as cosurfactants, was demonstrated for the enantiomeric separation of a number of pharmaceutical drugs in microemulsion electrokinetic chromatography (MEEKC). The chiral alcohols investigated were optically active 2-alkanols, with the alkyl chain length having carbon number ranging from 4 to 7. The data indicated that, except for R-(-)-2-butanol, the use of R-(-)-2-pentanol, R-(-)-2-hexanol or R-(-)-2-heptanol as the chiral cosurfactant resulted in the baseline or partial resolution of most of the test solutes, i.

Application of headspace solid-phase microextraction (HS-SPME) and comprehensive two-dimensional gas chromatography (GC x GC) for the chemical profiling of volatile oils in complex herbal mixtures.

The coupling of headspace solid-phase microextraction (HS-SPME) with comprehensive two-dimensional gas chromatography (GC x GC) was shown to be a powerful technique for the rapid sampling and analysis of volatile oils in complex herbal materials. When compared to one-dimensional (1-D) GC, the improved analytical capabilities of GC x GC in terms of increased detection sensitivity and separation power were demonstrated by using HS-SPME/GC x GC for the chemical profiling (fingerprinting) of essential/volatile oils contained in herbal materials of increasing analytical complexity. More than 20 marker compounds belonging to Panax quinquefolius (American ginseng) can be observed within the 2-D contour plots of ginseng itself, a mixture of ginseng and another important herb (P.

Fingerprint profiling of acid hydrolyzates of polysaccharides extracted from the fruiting bodies and spores of Lingzhi by high-performance thin-layer chromatography.

Modern extraction and planar chromatographic instrumentation were employed for the fingerprint profiling of carbohydrates from an important and popular medicinal mushroom commonly known as Lingzhi. For the first time, the feasibility of employing the high-performance thin-layer chromatography (HPTLC) peak profiles (fingerprints) of carbohydrates for the screening of various Lingzhi species/products was demonstrated. An analytical procedure was developed such that upon acid hydrolysis of the polysaccharides extracted from various Lingzhi samples, fingerprint profiles that reveal the relative amounts of the degradation products, such as mono- and oligosaccharides, can be obtained using HPTLC plates (Si 50000) for separation and 4-aminobenzoic acid as the post-chromatographic derivatization reagent for detection.

Stacking and separation of enantiomers by acetonitrile-salt mixtures in micellar electrokinetic chromatography.

The feasibility of employing the "acetonitrile stacking" method in micellar electrokinetic chromatography (MEKC) for the on-line preconcentration and separation of enantiomers is demonstrated for the first time. The effects of various experimental parameters on the stacking and separation of three different pairs of optical isomers, i.e.

Investigation of the effects of wall adsorption of the visualization agent on baseline noise characteristics for indirect UV detection in capillary electrophoresis.

New insights into the effects of the wall adsorption of the visualization agent on baseline noise characteristics in indirect UV detection in capillary electrophoresis were provided. When compared to relatively small, hydrophilic cationic (1-(4-pyridyl)pyridinium chloride hydrochloride) or anionic chromophores (bromide and benzoate), the use of a UV-absorbing long-chain cationic surfactant (benzyldimethylhexadecylammonium chloride) as a probe (visualization agent) for studying baseline noise characteristics as a function of various experimental conditions, such as applied voltage, pH or buffer composition, was found to provide noise data that were very different under certain conditions. For cationic visualization agents that have a strong tendency of adsorbing onto the capillary surfaces due to electrostatic and/or hydrophobic interactions, it appeared that the interplay of both thermal as well as adsorption/desorption events occurring within the capillary is likely responsible for a fluctuation of the visualization agent concentration at the detector.

Effects of organic solvents on sample pretreatment and separation performances in capillary electrophoresis.

A review of recent developments in theoretical as well as application studies concerning the use of organic solvents, either as purely nonaqueous solvents, hydro-organic mixtures, or a combination of an organic solvent with another organic modifier(s), in the sample matrix and/or separation buffer for effecting sample pretreatment and/or improving separation performances in capillary electrophoresis (CE) is presented. In particular, recent advances made in furthering the basic understanding of selectivity changes that occur in capillary zone electrophoresis due the presence of organic solvents in the separation medium, based on in-depth studies of fundamental processes, such as acid-base chemistry, ion-ion and ion-solvent interactions, were discussed in detail. The utilization of organic solvents for improving the resolution of highly challenging and important separations, i.

Simultaneous determination of copper(II) and cobalt(II) by ion chromatography coupled with chemiluminescent detection.

In the absence of any special luminescent reagents, a weakly chemiluminescent emission was observed during the decomposition of hydrogen peroxide, catalyzed by transition-metal ions, such as Cu(II) and Co(II), in basic aqueous solution. The chemiluminescent intensity was significantly enhanced by the addition of ethyldimethylcetylammonium bromide and uranine. The signal-to-noise ratio (S/N) was proportional to the concentrations of Cu(II) and Co(II).

Pressurized liquid extraction of active ingredients (ginsenosides) from medicinal plants using non-ionic surfactant solutions.

The feasibility of employing aqueous non-ionic surfactant solutions as an alternative solvent system in pressurized liquid extraction (PLE) is demonstrated for the first time using the roots of American ginseng as model solid samples. When compared to the use of pure water or methanol, the presence of a common non-ionic surfactant (Triton X-100) in water at a concentration above its critical micelle concentration was shown to enhance the amount of pharmacologically active ingredients (ginsenosides) extracted from ginseng roots. The advantages of using aqueous non-surfactant solutions were also demonstrated by comparing extraction performances between ultrasonic-assisted extraction and PLE methods.

A review of modern sample-preparation techniques for the extraction and analysis of medicinal plants.

Sample preparation is the crucial first step in the analysis of herbs. In recent years there has been increasing interest worldwide in the use of alternative/herbal medicine for the prevention and treatment of various illnesses. Currently, however, quality-related problems (lack of consistency, safety, and efficacy) seem to be overshadowing the potential genuine health benefits of various herbal products.