Multimaterial Digital-Light Processing of Metal-Organic Framework (MOF) Composites: A Versatile Tool for the Rapid Microfabrication of MOF-Based Devices.

Patterning Metal-Organic Frameworks (MOFs) is essential for their use in sensing, electronics, photonics, and encryption technologies. However, current lithography methods are limited in their ability to pattern more than two MOFs, hindering the potential for creating advanced multifunctional surfaces. Additionally, balancing design flexibility, simplicity, and cost often results in compromises.

Crystallizing Sub 10 nm Covalent Organic Framework Thin Films via Interfacial-Residual Concomitance.

Synthesis of covalent organic framework (COF) thin films on different supports with high crystallinity and porosity is crucial for their potential applications. We have designed a new synchronized methodology, residual crystallization (RC), to synthesize sub 10 nm COF thin films. These residual crystallized COF thin films showcase high surface area, crystallinity, and conductivity at room temperature.

The Specific Immune Response after Vaccination against Neonatal Calf Diarrhoea Differs between Apparent Similar Vaccines in a Case Study.

Neonatal calf diarrhoea (NCD) is a major health challenge with a negative impact on farm profitability, calf welfare and antimicrobial use. Neonatal calves are particularly sensitive to enteric infections. Thus, a key point for prevention is minimising infectious pressure and maximising specific immune responses.

Polymer brush hypersurface photolithography.

Polymer brush patterns have a central role in established and emerging research disciplines, from microarrays and smart surfaces to tissue engineering. The properties of these patterned surfaces are dependent on monomer composition, polymer height, and brush distribution across the surface. No current lithographic method, however, is capable of adjusting each of these variables independently and with micrometer-scale resolution.

Controlled-Height Brush Polymer Patterns via Surface-Initiated Thiol-Methacrylate Photopolymerizations.

Here, we show that the surface-initiated thiol-(meth)acrylate polymerization can be used to create brush polymer patterns with precise control over the feature height at each microscale pixel. The reaction was studied using a printer where a digital micromirror device controls light delivery to the surface, so multiple reaction conditions can be examined in each print. The resulting increases in experimental throughput and precision were demonstrated by studying systematically the effect of photocatalyst, photoinitiator, and light intensity on feature growth rate.

Multivalent binding of concanavalin A on variable-density mannoside microarrays.

Interactions between cell surface glycans and glycan binding proteins (GBPs) have a central role in the immune response, pathogen-host recognition, cell-cell communication, and a myriad other biological processes. Because of the weak association between GBPs and glycans in solution, multivalent and cooperative interactions in the dense glycocalyx have an outsized role in directing binding affinity and selectivity. However, a major challenge in glycobiology is that few experimental approaches exist for examining and understanding quantitatively how glycan density affects avidity with GBPs, and there is a need for new tools that can fabricate glycan arrays with the ability to vary their density controllably and systematically in each feature.

Hemostatic spray powder TC-325 for GI bleeding in a nationwide study: survival and predictors of failure via competing risks analysis.

Background And Aims: TC-325 (Hemospray, Cook Medical, Winston-Salem, NC) is an inorganic hemostatic powder recently approved by the U.S. Food and Drug Administration.

Maskless Photochemical Printing of Multiplexed Glycan Microarrays for High-Throughput Binding Studies.

Spatially encoded glycan microarrays promise to rapidly accelerate our understanding of glycan binding in myriad biological processes, which could lead to new therapeutics and previously unknown drug targets. Here, we bring together a digital micromirror device, microfluidic introduction of inks, and advanced surface photochemistry to produce multiplexed glycan microarrays with reduced feature diameters, an increased number of features per array, and precise control of glycan density at each feature. The versatility of this platform was validated by printing two distinct glycan microarrays where, in the first, different glycans were immobilized to create a multiplexed array and, in another, the density of a single glycan was varied systematically to explore the effect of surface presentation on lectin-glycan binding.

Usefulness of Non-magnifying Narrow Band Imaging in EVIS EXERA III Video Systems and High-Definition Endoscopes to Diagnose Dysplasia in Barrett's Esophagus Using the Barrett International NBI Group (BING) Classification.

Background: Narrow band imaging (NBI) allows identification of abnormal areas of Barrett's esophagus (BE) and could facilitate targeted biopsies.

Aims: We evaluated the diagnostic accuracy for dysplasia prediction using non-magnifying NBI in Evis Exera III processors and high-definition endoscopes using the Barrett International NBI Group (BING) classification, as well as inter/intraobserver agreement for dysplasia prediction and mucosal/vascular patterns.

Methods: Eight observers (4 staff endoscopists and 4 trainee endoscopists) evaluated 100 images selected from an anonymized bank of 470 photographs using the BING classification.

Toward 4D Nanoprinting with Tip-Induced Organic Surface Reactions.

Future nanomanufacturing tools will prepare organic materials with complex four-dimensional (4D) structure, where the position (x, y, z) and chemical composition within a volume is controlled with sub-1 μm spatial resolution. Such tools could produce substrates that mimic biological interfaces, like the cell surface or the extracellular matrix, whose topology and chemical complexity combine to direct some of the most sophisticated biological events. The control of organic materials at the nanoscale-level of spatial resolution could revolutionize the assembly of next generation optical and electronic devices or substrates for tissue engineering or enable fundamental biological or material science investigations.

Towards scanning probe lithography-based 4D nanoprinting by advancing surface chemistry, nanopatterning strategies, and characterization protocols.

Biointerfaces direct some of the most complex biological events, including cell differentiation, hierarchical organization, and disease progression, or are responsible for the remarkable optical, electronic, and biological behavior of natural materials. Chemical information encoded within the 4D nanostructure of biointerfaces - comprised of the three Cartesian coordinates (x, y, z), and chemical composition of each molecule within a given volume - dominates their interfacial properties. As such, there is a strong interest in creating printing platforms that can emulate the 4D nanostructure - including both the chemical composition and architectural complexity - of biointerfaces.

Freezing the Nonclassical Crystal Growth of a Coordination Polymer Using Controlled Dynamic Gradients.

A methodology that can be efficiently used to synthesize, isolate, and study out-of-equilibrium crystal structures employing controlled and diffusion-limited microfluidic environments is demonstrated. Unlike studies conducted with conventional mixing procedures in a flask, it is proven experimentally and with numerical simulations that microfluidic technologies can undoubtedly fine-tune reaction times and reagents concentration profiles; factors that enable out-of-equilibrium crystal forms to be obtained.

Introducing asymmetric functionality into MOFs via the generation of metallic Janus MOF particles.

Herein we report a versatile methodology for engineering metallic Janus MOF particles based on desymmetrization at interfaces, whereby each MOF particle is partially coated with a desired metal. We demonstrate that it enables the fabrication of homogeneous Janus MOF particles according to the MOF (ZIF-8, UiO-66 or UiO-66-SH), the metal (Au, Co or Pt), the MOF particle size (from the micrometer to the submicrometer regime) and the metal-film thickness (from 5 nm to 50 nm) employed. We anticipate that our strategy could be applied to impart new functionalities to MOFs, including asymmetric functionalization, magnetic-guidance and motorization.

Biomimetic Replication of Microscopic Metal-Organic Framework Patterns Using Printed Protein Patterns.

It is demonstrated that metal-organic frameworks (MOFs) can be replicated in a biomimetic fashion from protein patterns. Bendable, fluorescent MOF patterns are formed with micrometer resolution under ambient conditions. Furthermore, this technique is used to grow MOF patterns from fingerprint residue in 30 s with high fidelity.

Post-Synthetic Anisotropic Wet-Chemical Etching of Colloidal Sodalite ZIF Crystals.

Controlling the shape of metal-organic framework (MOF) crystals is important for understanding their crystallization and useful for myriad applications. However, despite the many advances in shaping of inorganic nanoparticles, post-synthetic shape control of MOFs and, in general, molecular crystals remains embryonic. Herein, we report using a simple wet-chemistry process at room temperature to control the anisotropic etching of colloidal ZIF-8 and ZIF-67 crystals.

Direct On-Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature.

We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.

Protecting metal-organic framework crystals from hydrolytic degradation by spray-dry encapsulating them into polystyrene microspheres.

Many metal-organic frameworks are water labile, including the iconic Hong-Kong University of Science and Technology-1 (HKUST-1). Spray-dry encapsulation of HKUST-1 crystals into polystyrene microspheres is reported here to yield composites that are resistant to water but retain most of the excellent gas sorption capacity of HKUST-1. These composites are demonstrated to exhibit superior water adsorption/desorption cycling, maintaining the level of water uptake even after three cycles.

Femtolitre chemistry assisted by microfluidic pen lithography.

Chemical reactions at ultrasmall volumes are becoming increasingly necessary to study biological processes, to synthesize homogenous nanostructures and to perform high-throughput assays and combinatorial screening. Here we show that a femtolitre reaction can be realized on a surface by handling and mixing femtolitre volumes of reagents using a microfluidic stylus. This method, named microfluidic pen lithography, allows mixing reagents in isolated femtolitre droplets that can be used as reactors to conduct independent reactions and crystallization processes.

Single-crystal metal-organic framework arrays.

A novel, versatile pen-type lithography-based methodology was developed to control the growth of HKUST-1 crystals on surfaces by direct delivery of femtoliter droplets containing both inorganic and organic building block precursors. This approach shows that through the use of surfaces with low wettability it is possible to control the crystallization of a single submicrometer metal-organic framework crystal at a desired location on a surface.

Nanoscale metal-organic materials.

Metal-organic materials are found to be a fascinating novel class of functional nanomaterials. The limitless combinations between inorganic and organic building blocks enable researchers to synthesize 0- and 1-D metal-organic discrete nanostructures with varied compositions, morphologies and sizes, fabricate 2-D metal-organic thin films and membranes, and even structure them on surfaces at the nanometre length scale. In this tutorial review, the synthetic methodologies for preparing these miniaturized materials as well as their potential properties and future applications are discussed.

Ronderosia ommexechoides: a new species of Brazilian dichroplini (Orthoptera: Acrididae, Melanoplinae).

A new species of the genus Ronderosia Cigliano 1997 is described. Color illustrations of the female and male, drawings of female and male external genitalia as well as drawings of its phallic structures and photographs of the chromosomes are included.