Synergy of shaped-induced enhanced Raman scattering to improve surface-enhanced Raman scattering signal in the thiram molecule detection.

Herein, we explore the combined effect of Shaped-Induced Enhanced Raman Scattering (SIERS) and Surface-Enhanced Raman Scattering (SERS) for detecting thiram molecules. We fabricated V-shaped microchannels on a silicon (100) substrate through a standard lithography and etching process. The analysis of SIERS@SERS was performed for Si-V substrates modified with AuNRs with different thiram concentrations, 10 to 10 mol/L.

Exploring the Charge Transport of a Natural Eumelanin for Sustainable Technologies.

Eumelanin, the main quinone-based biomaterial of the melanin family of compounds, is emerging as a model for medical and sustainable electronic interfaces due to its biocompatibility, biodegradability, and transducing abilities. The study utilizes current-voltage measurements and impedance/dielectric spectroscopy under a controlled hydration atmosphere to investigate the charge transport of eumelanin produced from the BSB49 strain. We show no differences in the electrical response in highly hydrated conditions compared to the standard synthetic eumelanin.

Impact of Planar and Vertical Organic Field-Effect Transistors on Flexible Electronics.

The development of flexible and conformable devices, whose performance can be maintained while being continuously deformed, provides a significant step toward the realization of next-generation wearable and e-textile applications. Organic field-effect transistors (OFETs) are particularly interesting for flexible and lightweight products, because of their low-temperature solution processability, and the mechanical flexibility of organic materials that endows OFETs the natural compatibility with plastic and biodegradable substrates. Here, an in-depth review of two competing flexible OFET technologies, planar and vertical OFETs (POFETs and VOFETs, respectively) is provided.

Enhanced Hydrophobicity in Nanocellulose-Based Materials: Toward Green Wearable Devices.

Nanocellulose is a promising material for fabricating green, biocompatible, flexible, and foldable devices. One of the main issues of using nanocellulose as a fundamental component for wearable electronics is the influence of environmental conditions on it. The water adsorption promotes the swelling of nanopaper substrates, which directly affects the devices' electrical properties prepared on/with it.

VEGETABLE CELLULOSE NANOFIBER DRESSING AIDS IN THE HEALING PROCESS OF THIRD-DEGREE BURNS? STUDY ON RATS.

Background: The treatment of 3rd degree burns represents a major medical challenge. Pinus vegetable cellulose is a biomaterial with characteristic similar to bacterial cellulose.

Aim: To evaluate the safety of cellulose membrane (Pinus sp) in the treatment of 3rd burns in rats and to compare its effectiveness with the bacterial membrane already on the market.

Reorganization Energy upon Controlled Intermolecular Charge-Transfer Reactions in Monolithically Integrated Nanodevices.

Intermolecular electron-transfer reactions are key processes in physics, chemistry, and biology. The electron-transfer rates depend primarily on the system reorganization energy, that is, the energetic cost to rearrange each reactant and its surrounding environment when a charge is transferred. Despite the evident impact of electron-transfer reactions on charge-carrier hopping, well-controlled electronic transport measurements using monolithically integrated electrochemical devices have not successfully measured the reorganization energies to this date.

Room-Temperature Negative Differential Resistance in Surface-Supported Metal-Organic Framework Vertical Heterojunctions.

The advances of surface-supported metal-organic framework (SURMOF) thin-film synthesis have provided a novel strategy for effectively integrating metal-organic framework (MOF) structures into electronic devices. The considerable potential of SURMOFs for electronics results from their low cost, high versatility, and good mechanical flexibility. Here, the first observation of room-temperature negative differential resistance (NDR) in SURMOF vertical heterojunctions is reported.

Silicon Microchannel-Driven Raman Scattering Enhancement to Improve Gold Nanorod Functions as a SERS Substrate toward Single-Molecule Detection.

The investigation of enhanced Raman signal effects and the preparation of high-quality, reliable surface-enhanced Raman scattering (SERS) substrates is still a hot topic in the SERS field. Herein, we report an effect based on the shape-induced enhanced Raman scattering (SIERS) to improve the action of gold nanorods (AuNRs) as a SERS substrate. Scattered electric field simulations reveal that bare V-shaped Si substrates exhibit spatially distributed interference patterns from the incident radiation used in the Raman experiment, resulting in constructive interference for an enhanced Raman signal.

Ambipolar Resistive Switching in an Ultrathin Surface-Supported Metal-Organic Framework Vertical Heterojunction.

Memristors (MRs) are considered promising devices with the enormous potential to replace complementary metal-oxide-semiconductor (CMOS) technology, which approaches the scale limit. Efforts to fabricate MRs-based hybrid materials may result in suitable operating parameters coupled to high mechanical flexibility and low cost. Metal-organic frameworks (MOFs) arise as a favorable candidate to cover such demands.

Enhanced mobility and controlled transparency in multilayered reduced graphene oxide quantum dots: a charge transport study.

Reduced graphene oxide (rGO) layers are known to be significantly conductive along the basal plane throughout delocalized sp domains. Defects present in rGO implies in disordered systems with numerous localized sites, resulting in a charge transport governed mainly by a 2D variable range hopping (VRH) mechanism. These characteristics are observed even in multilayered rGO since the through-plane conduction is expected to be insubstantial.

Versatile and Robust Integrated Sensors To Locally Assess Humidity Changes in Fully Enclosed Paper-Based Devices.

The synergic combination of materials and interfaces to create novel functional devices is a crucial approach for various applications, including low-cost paper-based point-of-care systems. In this work, we demonstrate the implementation of surface-modified polypyrrole (PPy) structures, monolithically integrated into a three-dimensional multilayered paper-based microfluidic device, to locally assess humidity changes. The fabrication and integration of the system include the deterministic incorporation of PPy into the paper-based structure by gas-phase polymerization and the modification of the polymer properties to allow local humidity monitoring.

Poole-Frenkel emission on functionalized, multilayered-packed reduced graphene oxide nanoplatelets.

The unique electronic, mechanical and optical properties of graphene make it a remarkable 2D material, widely explored in a plethora of applications. However, graphene zero-bandgap and the production of defect-free pristine graphene in large areas still limit some applications. To circumvent these issues, graphene-derived 2D materials have arisen as attractive candidates for low-dimensional systems, which requires a better comprehension of their properties.

Charge carrier transport in defective reduced graphene oxide as quantum dots and nanoplatelets in multilayer films.

Graphene is a breakthrough 2D material due to its unique mechanical, electrical, and thermal properties, with considerable responsiveness in real applications. However, the coverage of large areas with pristine graphene is a challenge and graphene derivatives have been alternatively exploited to produce hybrid and composite materials that allow for new developments, considering also the handling of large areas using distinct methodologies. For electronic applications there is significant interest in the investigation of the electrical properties of graphene derivatives and related composites to determine whether the characteristic 2D charge transport of pristine graphene is preserved.

Deposition of exchange-coupled dinickel complexes on gold substrates utilizing ambidentate mercapto-carboxylato ligands.

The chemisorption of magnetically bistable transition metal complexes on planar surfaces has recently attracted increased scientific interest due to its potential application in various fields, including molecular spintronics. In this work, the synthesis of mixed-ligand complexes of the type [NiL(L')](ClO), where L represents a 24-membered macrocyclic hexaazadithiophenolate ligand and L' is a ω-mercapto-carboxylato ligand (L' = HS(CH)CO (), HS(CH)CO (), or HS(CH)CO ()), and their ability to adsorb on gold surfaces is reported. Besides elemental analysis, IR spectroscopy, electrospray ionization mass spectrometry (ESIMS), UV-vis spectroscopy, and X-ray crystallography (for and ), the compounds were also studied by temperature-dependent magnetic susceptibility measurements (for and ) and (broken symmetry) density functional theory (DFT) calculations.

Flexible and Foldable Fully-Printed Carbon Black Conductive Nanostructures on Paper for High-Performance Electronic, Electrochemical, and Wearable Devices.

In this work, we demonstrate the first example of fully printed carbon nanomaterials on paper with unique features, aiming the fabrication of functional electronic and electrochemical devices. Bare and modified inks were prepared by combining carbon black and cellulose acetate to achieve high-performance conductive tracks with low sheet resistance. The carbon black tracks withstand extremely high folding cycles (>20 000 cycles), a new record-high with a response loss of less than 10%.

Direct Drawing Method of Graphite onto Paper for High-Performance Flexible Electrochemical Sensors.

A simple and fast fabrication method to create high-performance pencil-drawn electrochemical sensors is reported for the first time. The sluggish electron transfer observed on bare pencil-drawn surfaces was enhanced using two electrochemical steps: first oxidizing the surface and then reducing it in a subsequent step. The heterogeneous rate constant was found to be 5.

A simple capacitive method to evaluate ethanol fuel samples.

Ethanol is a biofuel used worldwide. However, the presence of excessive water either during the distillation process or by fraudulent adulteration is a major concern in the use of ethanol fuel. High water levels may cause engine malfunction, in addition to being considered illegal.

Three-Dimensional Organic Conductive Networks Embedded in Paper for Flexible and Foldable Devices.

The fabrication of three-dimensional (3D) polypyrrole conductive tracks through the porous structure of paper is demonstrated by the first time. We combined paper microfluidics and gas-phase pyrrole monomers to chemically synthesize polypyrrole-conducting channels embedded in-between the cellulose fibers. By using this method, foldable conductive structures can be created across the whole paper structure, allowing the electrical connection between both sides of the substrate.

Self-assembled ultra-compact energy storage elements based on hybrid nanomembranes.

Self-assembly methods combined with standard top-down approaches are demonstrated to be suitable for fabricating three-dimensional ultracompact hybrid organic/inorganic electronic devices based on rolled-up nanomembranes. Capacitors that are self-wound and manufactured in parallel are almost 2 orders of magnitude smaller than their planar counterparts and exhibit capacitances per footprint area of around 200 microF/cm(2). This value significantly exceeds that which was previously reported for metal-insulator-metal capacitors based on Al(2)O(3), and the obtained specific energy (approximately 0.