Binding of Nitriles and Isonitriles to V(III) and Mo(III) Complexes: Ligand vs Metal Controlled Mechanism.

The synthesis and structures of nitrile complexes of V(N[Bu]Ar), (Ar = 3,5-MeCH), are described. Thermochemical and kinetic data for their formation were determined by variable temperature Fourier transform infrared (FTIR), calorimetry, and stopped-flow techniques. The extent of back-bonding from metal to coordinated nitrile indicates that electron donation from the metal to the nitrile plays a less prominent role for than for the related complex Mo(N[Bu]Ar), .

Mechanistic Pathways for NO Elimination from -RSn-O-N═N-O-SnR and for Reversible Binding of CO to RSn-O-SnR (R = Ph, Cy).

The rate and mechanism of the elimination of NO from -RSn-O-N═N-O-SnR (R = Ph () and R = Cy ()) to form RSn-O-SnR (R = Ph () and R = Cy ()) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39-79 °C in CD. Activation parameters for this reaction are Δ = 15.8 ± 2.

Production of -NaNO and NaNO by Ball Milling NaO and NO in Alkali Metal Halide Salts.

Ball milling of sodium oxides and alkali metal halide salts under a pressure of 2 atm nitrous oxide at temperatures of 38 ± 4 °C is reported. After 2.5 h of ball milling, FTIR data for both NO and NO additions show conclusively that -NaNO is formed based on excellent agreement with data reported earlier by Jansen and Feldmann who prepared pure crystalline -NaNO by reaction of sodium oxide and nitrous oxide for 2 h at 360 °C in a tube furnace.

Ligand-Directed Reactivity in Dioxygen and Water Binding to cis-[Pd(NHC)(η-O)].

Reaction of [Pd(IPr)] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) and O leads to the surprising discovery that at low temperature the initial reaction product is a highly labile peroxide complex cis-[Pd(IPr)(η-O)]. At temperatures ≳ -40 °C, cis-[Pd(IPr)(η-O)] adds a second O to form trans-[Pd(IPr)(η-O)]. Squid magnetometry and EPR studies yield data that are consistent with a singlet diradical ground state with a thermally accessible triplet state for this unique bis-superoxide complex.

Thermodynamic, Kinetic, Structural, and Computational Studies of the PhSn-H, PhSn-SnPh, and PhSn-Cr(CO)CMe Bond Dissociation Enthalpies.

The kinetics of the reaction of PhSnH with excess •Cr(CO)CMe = •Cr, producing HCr and PhSn-Cr, was studied in toluene solution under 2-3 atm CO pressure in the temperature range of 17-43.5 °C. It was found to obey the rate equation d[PhSn-Cr]/dt = k[PhSnH][•Cr] and exhibit a normal kinetic isotope effect (k/k = 1.

Synthesis of [Pt(SnBu(t)3)(IBu(t))(μ-H)]2, a Coordinatively Unsaturated Dinuclear Compound which Fragments upon Addition of Small Molecules to Form Mononuclear Pt-Sn Complexes.

The reaction of Pt(COD)2 with one equivalent of tri-tert-butylstannane, Bu(t)3SnH, at room temperature yields Pt(SnBu(t)3)(COD)(H)(3) in quantitative yield. In the presence of excess Bu(t)3SnH, the reaction goes further, yielding the dinuclear bridging stannylene complex [Pt(SnBu(t)3)(μ-SnBu(t)2)(H)2]2 (4). The dinuclear complex 4 reacts rapidly and reversibly with CO to furnish [Pt(SnBu(t)3)(μ-SnBu(t)2)(CO)(H)2]2 (5).

Role of axial base coordination in isonitrile binding and chalcogen atom transfer to vanadium(III) complexes.

The enthalpy of oxygen atom transfer (OAT) to V[(Me3SiNCH2CH2)3N], 1, forming OV[(Me3SiNCH2CH2)3N], 1-O, and the enthalpies of sulfur atom transfer (SAT) to 1 and V(N[t-Bu]Ar)3, 2 (Ar = 3,5-C6H3Me2), forming the corresponding sulfides SV[(Me3SiNCH2CH2)3N], 1-S, and SV(N[t-Bu]Ar)3, 2-S, have been measured by solution calorimetry in toluene solution using dbabhNO (dbabhNO = 7-nitroso-2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene) and Ph3SbS as chalcogen atom transfer reagents.

Reductive functionalization of a rhodium(III)-methyl bond by electronic modification of the supporting ligand.

Net reductive elimination (RE) of MeX (X = halide or pseudo-halide: Cl(-), CF3CO2(-), HSO4(-), OH(-)) is an important step during Pt-catalyzed hydrocarbon functionalization. Developing Rh(I/III)-based catalysts for alkane functionalization is an attractive alternative to Pt-based systems, but very few examples of RE of alkyl halides and/or pseudo-halides from Rh(III) complexes have been reported. Here, we compare the influence of the ligand donor strength on the thermodynamic potentials for oxidative addition and reductive functionalization using [(t)Bu3terpy]RhCl (1) {(t)Bu3terpy = 4,4',4''-tri-tert-butylpyridine} and [(NO2)3terpy]RhCl (2) {(NO2)3terpy = 4,4',4''-trinitroterpyridine}.

Functionalization reactions characteristic of a robust bicyclic diphosphane framework.

The 3,4,8,9-tetramethyl-1,6-diphospha-bicyclo-[4.4.0]deca-3,8-diene (P2(C6H10)2) framework containing a P-P bond has allowed for an unprecedented selectivity toward functionalization of a single phosphorus lone pair with reference to acyclic diphosphane molecules.

Thermodynamic and kinetic study of cleavage of the N-O bond of N-oxides by a vanadium(III) complex: enhanced oxygen atom transfer reaction rates for adducts of nitrous oxide and mesityl nitrile oxide.

Thermodynamic, kinetic, and computational studies are reported for oxygen atom transfer (OAT) to the complex V(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2, 1) from compounds containing N-O bonds with a range of BDEs spanning nearly 100 kcal mol(-1): PhNO (108) > SIPr/MesCNO (75) > PyO (63) > IPr/N2O (62) > MesCNO (53) > N2O (40) > dbabhNO (10) (Mes = mesityl; SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene; Py = pyridine; IPr = 1,3-bis(diisopropyl)phenylimidazol-2-ylidene; dbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene).

High quantum yield molecular bromine photoelimination from mononuclear platinum(IV) complexes.

Pt(IV) complexes trans-Pt(PEt3)2(R)(Br)3 (R = Br, aryl and polycyclic aromatic fragments) photoeliminate molecular bromine with quantum yields as high as 82%. Photoelimination occurs both in the solid state and in solution. Calorimetry measurements and DFT calculations (PMe3 analogs) indicate endothermic and endergonic photoeliminations with free energies from 2 to 22 kcal/mol of Br2.

Two-step binding of O2 to a vanadium(III) trisanilide complex to form a non-vanadyl vanadium(V) peroxo complex.

Treatment of V(N[(t)Bu]Ar)(3) (1) (Ar = 3,5-Me(2)C(6)H(3)) with O(2) was shown by stopped-flow kinetic studies to result in the rapid formation of (η(1)-O(2))V(N[(t)Bu]Ar)(3) (2) (ΔH(‡) = 3.3 ± 0.2 kcal/mol and ΔS(‡) = -22 ± 1 cal mol(-1) K(-1)), which subsequently isomerizes to (η(2)-O(2))V(N[(t)Bu]Ar)(3) (3) (ΔH(‡) = 10.

Thermodynamic, kinetic, and mechanistic study of oxygen atom transfer from mesityl nitrile oxide to phosphines and to a terminal metal phosphido complex.

The enthalpies of oxygen atom transfer (OAT) from mesityl nitrile oxide (MesCNO) to Me(3)P, Cy(3)P, Ph(3)P, and the complex (Ar[(t)Bu]N)(3)MoP (Ar = 3,5-C(6)H(3)Me(2)) have been measured by solution calorimetry yielding the following P-O bond dissociation enthalpy estimates in toluene solution (±3 kcal mol(-1)): Me(3)PO [138.5], Cy(3)PO [137.6], Ph(3)PO [132.

Oxygen binding to [Pd(L)(L')] (L= NHC, L' = NHC or PR3, NHC = N-heterocyclic carbene). synthesis and structure of a paramagnetic trans-[Pd(NHC)2(η(1)-O2)2] complex.

The reactivity of a number of two-coordinate [Pd(L)(L')] (L = N-heterocyclic carbene (NHC) and L' = NHC or PR(3)) complexes with O(2) has been examined. Stopped-flow kinetic studies show that O(2) binding to [Pd(IPr)(P(p-tolyl)(3))] to form cis-[Pd(IPr)(P(p-tolyl)(3))(η(2)-O(2))] occurs in a rapid, second-order process. The enthalpy of O(2) binding to the Pd(0) center has been determined by solution calorimetry to be -26.

Coordination-mode control of bound nitrile radical complex reactivity: intercepting end-on nitrile-Mo(III) radicals at low temperature.

Variable temperature equilibrium studies were used to derive thermodynamic data for formation of eta(1) nitrile complexes with Mo(N[(t)Bu]Ar)(3), 1. (1-AdamantylCN = AdCN: DeltaH(degrees) = -6 +/- 2 kcal mol(-1), DeltaS(degrees) = -20 +/- 7 cal mol(-1) K(-1). C(6)H(5)CN = PhCN: DeltaH(degrees) = -14.

Experimental and computational studies of binding of dinitrogen, nitriles, azides, diazoalkanes, pyridine, and pyrazines to M(PR(3))(2)(CO)(3) (M = Mo, W; R = Me, (i)Pr).

The enthalpies of binding of a number of N-donor ligands to the complex Mo(P(i)Pr(3))(2)(CO)(3) in toluene have been determined by solution calorimetry and equilibrium measurements. The measured binding enthalpies span a range of approximately 10 kcal mol(-1): DeltaH(binding) = -8.8 +/- 1.

Thermodynamic investigations of the staudinger reaction of trialkylphosphines with 1-adamantyl azide and the isolation of an unusual s-cis phosphazide.

The reaction of PR(3) (R = Cy, (i)Pr) with 1-adamantyl azide (N(3)Ad) in benzene results in an equilibrium of the starting material and the phosphazide R(3)PN(3)Ad. Thermodynamic and kinetic measurements were taken of the reaction of P(i)Pr(3) with N(3)Ad and yielded DeltaH = -18.7 +/- 1.

Thermodynamic and kinetic studies of H atom transfer from HMo(CO)3(eta(5)-C5H5) to Mo(N[t-Bu]Ar)3 and (PhCN)Mo(N[t-Bu]Ar)3: direct insertion of benzonitrile into the Mo-H bond of HMo(N[t-Bu]Ar)3 forming (Ph(H)C=N)Mo(N[t-Bu]Ar)3.

Synthetic studies are reported that show that the reaction of either H2SnR2 (R = Ph, n-Bu) or HMo(CO)3(Cp) (1-H, Cp = eta(5)-C5H5) with Mo(N[t-Bu]Ar)3 (2, Ar = 3,5-C6H3Me2) produce HMo(N[t-Bu]Ar)3 (2-H). The benzonitrile adduct (PhCN)Mo(N[t-Bu]Ar)3 (2-NCPh) reacts rapidly with H2SnR2 or 1-H to produce the ketimide complex (Ph(H)C=N)Mo(N[t-Bu]Ar)3 (2-NC(H)Ph). The X-ray crystal structures of both 2-H and 2-NC(H)Ph are reported.

Thermodynamic, kinetic, and computational study of heavier chalcogen (S, Se, and Te) terminal multiple bonds to molybdenum, carbon, and phosphorus.

Enthalpies of chalcogen atom transfer to Mo(N[t-Bu]Ar)3, where Ar = 3,5-C6H3Me2, and to IPr (defined as bis-(2,6-isopropylphenyl)imidazol-2-ylidene) have been measured by solution calorimetry leading to bond energy estimates (kcal/mol) for EMo(N[t-Bu]Ar)3 (E = S, 115; Se, 87; Te, 64) and EIPr (E = S, 102; Se, 77; Te, 53). The enthalpy of S-atom transfer to PMo(N[ t-Bu]Ar) 3 generating SPMo(N[t-Bu]Ar)3 has been measured, yielding a value of only 78 kcal/mol. The kinetics of combination of Mo(N[t-Bu]Ar)3 with SMo(N[t-Bu]Ar)3 yielding (mu-S)[Mo(N[t-Bu]Ar)3]2 have been studied, and yield activation parameters Delta H (double dagger) = 4.

Spectroscopic detection and theoretical confirmation of the role of Cr2(CO)5(C5R5)2 and .Cr(CO)2(ketene)(C5R5) as intermediates in carbonylation of N=N=CHSiMe3 to O=C=CHSiMe3 by .Cr(CO)3(C5R5) (R = H, CH3).

Conversion of N=N=CHSiMe3 to O=C=CHSiMe3 by the radical complexes .Cr(CO)3C5R5 (R = H, CH3) derived from dissociation of [Cr(CO)3(C5R5)]2 have been investigated under CO, Ar, and N2 atmospheres. Under an Ar or N2 atmosphere the reaction is stoichiometric and produces the Cr[triple bond]Cr triply bonded complex [Cr(CO)2(C5R5)]2.

Theoretical investigation of the binding of small molecules and the intramolecular agostic interaction at tungsten centers with carbonyl and phosphine ligands.

The factors controlling both the binding of small molecules to several tungsten complexes and agostic bonding in the W(CO)3(PCy3)2 complex have been examined through B3LYP hybrid density functional theory and ab initio MP2 calculations with and without basis set superposition error (BSSE) corrections. This approach attempts to isolate insofar as possible the separate effects of intrinsic bonding interactions, electron induction by ligands, and steric hindrance and strain. An important conclusion from this study is that for bimolecular reactions, BSSE corrections must be included for quantitative predictions.

Synthesis, structure, and thermochemistry of the formation of the metal-metal bonded dimers [Mo(mu-TeAr)(CO)3(PiP3)]2 (Ar = phenyl, naphthyl) by phosphine elimination from *Mo(TePh)(CO)3(PiPr3)2.

The complexes (*TeAr)Mo(CO)3(PiPr3)2 (Ar = phenyl, naphthyl; iPr = isopropyl) slowly eliminate PiPr3 at room temperature in a toluene solution to quantitatively form the dinuclear complexes [Mo(mu-TeAr)(CO)3(PiPr3)]2. The crystal structure of [Mo(mu-Te-naphthyl)(CO)3(PiPr3)]2 is reported and has a Mo-Mo distance of 3.2130 A.

Comparison of thermodynamic and kinetic aspects of oxidative addition of PhE-EPh (E = S, Se, Te) to Mo(CO)3(PR3)2, W(CO)3(PR3)2, and Mo(N[tBu]Ar)3 complexes. The role of oxidation state and ancillary ligands in metal complex induced chalcogenyl radical generation.

Enthalpies of oxidative addition of PhE-EPh (E = S, Se, Te) to the M(0) complexes M(PiPr3)2(CO)3 (M = Mo, W) to form stable complexes M(*EPh)(PiPr3)2(CO)3 are reported and compared to analogous data for addition to the Mo(III) complexes Mo(N[tBu]Ar)3 (Ar = 3,5-C6H3Me2) to form diamagnetic Mo(IV) phenyl chalcogenide complexes Mo(N[tBu]Ar)3(EPh). Reactions are increasingly exothermic based on metal complex, Mo(PiPr3)2(CO)3 < W(PiPr3)2(CO)3 < Mo(N[tBu]Ar)3, and in terms of chalcogenide, PhTe-TePh < PhSe-SePh < PhS-SPh. These data are used to calculate LnM-EPh bond strengths, which are used to estimate the energetics of production of a free *EPh radical when a dichalcogenide interacts with a specific metal complex.

Benzonitrile extrusion from molybdenum(IV) ketimide complexes obtained via radical C-E (E = O, S, Se) bond formation: toward a new nitrogen atom transfer reaction.

Beta-elimination is explored as a possible means of nitrogen-atom transfer into organic molecules. Molybdenum(IV) ketimide complexes of formula (Ar[t-Bu]N)3Mo(N=C(X)Ph), where Ar = 3,5-Me2C6H3 and X = SC6F5, SeC6F5, or O2CPh, are formally derived from addition of the carbene fragment [:C(X)Ph] to the terminal nitrido molybdenum(VI) complex (Ar[t-Bu]N)3Mo identical with N in which the nitrido nitrogen atom is installed by scission of molecular nitrogen. Herein the pivotal (Ar[t-Bu]N)3Mo(N=C(X)Ph) complexes are obtained through independent synthesis, and their propensity to undergo beta-X elimination, i.

Mechanism of white phosphorus activation by three-coordinate molybdenum(III) complexes: a thermochemical, kinetic, and quantum chemical investigation.

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.