Starting From Scratch: Husbandry Techniques to Establish the First Population of 'Akikiki (Oreomystis bairdi) in Human Care Using Wild-Collected Eggs.

Conservation breeding programs can save species from extinction by establishing assurance populations that provide individuals for achieving species recovery goals in the wild. However, keeping animals in human care can result in the selection of phenotypes that may be suboptimal for post-release survival and reproduction. It is therefore essential that conservation breeding programs provide animals with naturalistic conditions that facilitate the performance of species-typical behaviors, an endeavor that is also a vital aspect of animal welfare.

Synthesis of Submicrometric Chitosan Particles Loaded with Calcium Phosphate for Biomedical Applications.

Chitosan particles loaded with dibasic calcium phosphate anhydrous (DCPA) is a promising strategy for combining antimicrobial and osteoconduction properties in regenerative medicine. However, mostly micrometer-sized particles have been reported in the literature, limiting their use and reducing their effect in the biomedical field. We have recently overcome this limitation by developing submicrometer-sized particles with electrospray technique.

Incidence of New-Onset Type 1 Diabetes Among US Children During the COVID-19 Global Pandemic.

This cross-sectional study assesses the incidence of new-onset type 1 diabetes among US children during the COVID-19 pandemic.

Effect of processing methods on the chipping resistance of veneered zirconia.

Objectives: To evaluate the edge chipping resistance (R) and the fracture toughness (K) of 3Y-TZP bilayers produced with the following materials/processing combinations: fluorapatite glass-ceramic applied on zirconia using the traditional layering and hot-pressing (press-on) techniques; feldspathic porcelain using rapid layer technology (RLT); and lithium disilicate glass-ceramic using CAD-on method. The influence of the cooling rate (slow and fast) was analyzed for layering and hot-pressing.

Methods: Bilayer bars (25x4x2 mm) were made following manufacturers' instructions.

Structural aspects controlling the mechanical and biological properties of tough, double network hydrogels.

Anticipating an increasing demand for hybrid double network (DN) hydrogels in biomedicine and biotechnology, this study evaluated the effects of each network on the mechanical and biological properties. Polyethylene glycol (PEG) (meth)acrylate hydrogels with varied monomer molecular weights and architectures (linear vs. 4-arm) were produced with and without an added ionically bonded alginate network and their mechanical properties were characterized using compression testing.

Fiber reinforcement of a resin modified glass ionomer cement.

Objectives: Understand how discontinuous short glass fibers and braided long fibers can be effectively used to reinforce a resin modified glass ionomer cement (RMGIC) for carious lesion restorations.

Methods: Two control groups (powder/liquid kit and capsule) were prepared from a light cured RMGIC. Either discontinuous short glass fibers or braided polyethylene fiber ribbons were used as a reinforcement both with and without pre-impregnation with resin.

Anisotropic fracture resistance of avian eggshell.

In order to understand the fracture toughness anisotropy of avian eggshells, we have investigated eggshells of the emu (Dromaius novaehollandiae) whereby the large size (~13 cm × 9.5 cm) enabled the fabrication of beam samples in various orientations. The emu eggshell was found to have a hierarchical microstructure similar to chicken eggshell, with the only significant difference being the absence of a continuous cuticle layer.

Development of novel dental restorative composites with dibasic calcium phosphate loaded chitosan fillers.

Unlabelled: The incorporation of antimicrobial agents in restorative dental composites has the potential to slow the development of carious lesions.

Objective: The objectives of the present study were to develop experimental composite resins with chitosan or chitosan loaded with dibasic calcium phosphate anhydrous (DCPA) particles and to demonstrate their antimicrobial potential without loss of mechanical properties or biocompatibility.

Methods: Chitosan and chitosan/DCPA particles were synthetized by the electrospray method.

Effect of cooling protocol on mechanical properties and microstructure of dental veneering ceramics.

Objectives: Understand how cooling protocols control the microstructure and mechanical properties of veneering porcelains.

Methods: Two porcelain powders were selected, one used to veneer metallic frameworks (VM13) and one for zirconia frameworks (VM9). After the last firing cycle, the monolithic specimens were subjected to two cooling protocols: slow and fast.

Why a zero CTE mismatch may be better for veneered Y-TZP structures.

Objective: Compare residual stress distribution of bilayered structures with a mismatch between the coefficient of thermal expansion (CTE) of framework and veneering ceramic. A positive mismatch, which is recommended for metal-ceramic dental crowns, was hypothesized to contribute to a greater chipping frequency in veneered Y-TZP structures. In addition, the multidirectional nature of residual stresses in bars and crowns is presented to explore some apparent contradictions among different studies.

Influence of residual thermal stresses on the edge chipping resistance of PFM and veneered zirconia structures: Experimental and FEA study.

Objective: Chipping fractures of the veneering porcelain are frequently reported for veneered all-ceramic crowns. In the present study, the edge chipping test is used to measure the toughness and the edge chipping resistance of veneered zirconia and porcelain-fused-to-metal (PFM). The aim is to describe an edge chipping method developed with the use of a universal testing machine and to verify the accuracy of this method to determine the influence of residual thermal stresses on the chipping fracture resistance of veneering porcelain.

Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics.

Dental composite and ceramic restorative materials are designed to closely mimic the aesthetics and function of natural tooth tissue, and their longevity in the oral environment depends to a large degree on their fatigue and wear properties. The purpose of this review is to highlight some recent advances in our understanding of fatigue and wear mechanisms, and how they contribute to restoration failures in the complex oral environment. Overall, fatigue and wear processes are found to be closely related, with wear of dental ceramic occlusal surfaces providing initiation sites for fatigue failures, and subsurface fatigue crack propagation driving key wear mechanisms for composites, ceramics, and enamel.

Descriptions of crack growth behaviors in glass-ZrO2 bilayers under thermal residual stresses.

Objectives: This study was intended to separate residual stresses arising from the mismatch in coefficients of thermal expansion between glass and zirconia (ZrO2) from those stresses arising solely from the cooling process. Slow crack growth experimentes were undertaken to demonstrate how cracks grow in different residual stress fields.

Methods: Aluminosilicate glass discs were sintered onto ZrO2 to form glass-ZrO2 bilayers.

Experimental and finite element study of residual thermal stresses in veneered Y-TZP structures.

The main complications of zirconia-based laminated systems are chipping and delamination of veneering porcelain, which has been found to be directly associated with the development of residual thermal stresses in the porcelain layer. This study investigates the effects of cooling rate and specimen geometry on the residual stress states in porcelain-veneered zirconia structures. Bilayers of three different shapes (bars, semi-cylindrical shells, and arch-cubic structures) with 1.

Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area.

Developing yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with high strength and translucency could significantly widen the clinical indications of monolithic zirconia restorations. This study investigates the mechanical and optical properties of three Y-TZP ceramics: High-Translucency, High-Strength and High-Surface Area. The four-point bending strengths (mean ± standard error) for the three Y-TZP ceramics ( = 10) were 990 ± 39, 1416 ± 33 and 1076 ± 32 MPa for High-Translucency, High-Strength and High-Surface Area, respectively.

On the interfacial fracture resistance of resin-bonded zirconia and glass-infiltrated graded zirconia.

Objective: A major limiting factor for the widespread use of zirconia in prosthetic dentistry is its poor resin-cement bonding capabilities. We show that this deficiency can be overcome by infiltrating the zirconia cementation surface with glass. Current methods for assessing the fracture resistance of resin-ceramic bonds are marred by uneven stress distribution at the interface, which may result in erroneous interfacial fracture resistance values.

Residual stresses in Y-TZP crowns due to changes in the thermal contraction coefficient of veneers.

Objective: To test the hypothesis that the difference in the coefficient of thermal contraction of the veneering porcelain above (αliquid) and below (αsolid) its Tg plays an important role in stress development during a fast cooling protocol of Y-TZP crowns.

Methods: Three-dimensional finite element models of veneered Y-TZP crowns were developed. Heat transfer analyses were conducted with two cooling protocols: slow (group A) and fast (groups B-F).

Elastic modulus of posts and the risk of root fracture.

The definition of an optimal elastic modulus for a post is controversial. This work hypothesized that the influence of the posts' elastic modulus on dentin stress concentration is dependent on the load direction. The objective was to evaluate, using finite element analysis, the maximum principal stress (sigma(max)) on the root, using posts with different elastic modulus submitted to different loading directions.

Vertical root fracture in upper premolars with endodontic posts: finite element analysis.

Upper premolars restored with endodontic posts present a high incidence of vertical root fracture (VRF). Two hypotheses were tested: (1) the smaller mesiodistal diameter favors stress concentration in the root and (2) the lack of an effective bonding between root and post increases the risk of VRF. Using finite element analysis, maximum principal stress was analyzed in 3-dimensional intact upper second premolar models.