Phase-Assisted Tailored Conductivity of Doped Ceria Electrolytes to Boost SOFC Performance.

Efforts to lower the operating temperature of solid oxide fuel cells include producing electrolytes that are sufficiently conductive and stable below 600 °C. Doped ceria is one such electrolyte being considered. During this study, codoped ceria powders (CeSmMO, M = Bi, Zn and = 0, 0.

Robust Arduino controlled spin coater using a novel and simple gravity chuck design.

Spin coaters offer an invaluable method of thin film fabrication. Various implementations, both proprietary and open-source exist, offering vacuum and gravity samples chucks. These implementations vary in their reliability, ease-of-use, cost, and versatility.

A New Hydrometallurgical Process for Metal Extraction from Electric Arc Furnace Dust Using Ionic Liquids.

This research proposes a new hydrometallurgical method for Zn, In, and Ga extraction, along with Fe as a common impurity, from electric arc furnace dust (EAFD), using ionic liquids. EAFD is a metal-containing waste fraction generated in significant amounts during the process of steelmaking from scrap material in an electric arc furnace. With valuable metal recovery as the main goal, two ionic liquids, [BmimHSO] and [BmimCl], were studied in conjunction with three oxidants: Fe(SO), KMnO, and HO.

The influence of the Li addition rate during the hydrothermal synthesis of LiFePO on the average and local structure.

A hydrothermal method was used to synthesize LiFePO to explore the effect of the rate of addition of the Li precursor to a mixture of the Fe and PO precursors. Both the average and local structures were investigated using powder X-ray diffraction, Mössbauer spectroscopy and X-ray absorption spectroscopy. Slower addition rates led to increased oxidation of Fe to Fe despite purging all solutions constantly, as well as increased defects.

The Kinetics of Pyrite Dissolution in Nitric Acid Solution.

Refractory sulphidic ore with gold captured in pyrite has motivated researchers to find efficient means to break down pyrite to make gold accessible and, ultimately, improve gold extraction. Thus, the dissolution of pyrite was investigated to understand the mechanism and find the corresponding kinetics in a nitric acid solution. To carry this out, the temperature (25 to 85 °C), nitric acid concentration (1 to 4 M), the particle size of pyrite from 53 to 212 µm, and different stirring speeds were examined to observe their effect on pyrite dissolution.

Probing the stoichiometry dependent catalytic activity of nickel selenide counter electrodes in the redox reaction of iodide/triiodide electrolyte in dye sensitized solar cells.

Nickel selenide (Ni Se ) systems have received much attention in recent years as potential low cost counter electrodes (CEs) in dye sensitized solar cells (DSSCs). Their electrocatalytic activities are comparable to that of the conventional platinum CE. Despite their achievements, the effect of stoichiometry on their catalytic performance as CEs in DSSCs still remains unclear, hence the motivation for this work.

Application of Protocols Devised to Study Bi(III) Complex Formation by Voltammetry: The Bi(III)-Picolinic Acid System.

Bi(III) coordination chemistry has been largely neglected due to the difficulties faced when studying these systems even though Bi(III) is used in various medicinal applications. This study of the Bi(III)-picolinic acid system by voltammetry applies the rigorous methodologies already developed to enable the study of Bi(III) systems starting in very acidic solutions to prevent precipitation. This includes calibrating the glass electrode accurately at these low pHs, compensating for the diffusion junction potential below pH 2 and determining the reduction potential of uncomplexed Bi(III) which cannot be directly measured.

Measurements and Modeling To Determine the Reduction Potential of Uncomplexed Bi(III) in Nitrate Solutions for Application in Bi(III)-Ligand Equilibria Studies by Voltammetry.

The free metal ion potential, E(M), is a critical parameter in the calculation of formation constants when using voltammetry. When studying complex formation of Bi(III), however, E(Bi) cannot be directly measured. In this work a nitrate background electrolyte was employed to obtain reversible reduction waves.