Development and characterization of a novel variant of long-acting bovine follicle-stimulating hormone (brscFSH).

Assisted reproduction is a key aspect of modern animal breeding, providing valuable assistance in improving breeding programs. In this field, the administration of exogenous hormones, such as follicle-stimulating hormone (FSH), plays a crucial role in the induction of multiple ovulations. However, commercial FSH used in veterinary practice has been derived primarily from pituitary glands, obtained mostly from pigs for nearly four decades.

New Insights into the Hygroscopic Character of Ionic Liquids: Study of Fourteen Representatives of Five Cation and Four Anion Families.

Over the past three decades, the synthesis of new ionic liquids (ILs) and the expansion of their use in newer applications have grown exponentially. From the beginning of this vertiginous period, it was known that many of them were hygroscopic, which in some cases limited their use or altered the value of their measured physical properties with all the problems that this entails. In an earlier article, we addressed the hygroscopic grade achieved by the ILs 1-ethyl-3-methylimidazolium chloride, 1-ethyl-3-methylimidazolium bromide, 1-ethyl-3-methylimidazolium methyl sulfate, 1-ethyl-3-methylimidazolium ethyl sulfate, 1-ethyl-3-methylpyridinium ethyl sulfate, 1-ethyl-3-methylimidazolium tosylate, 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-dodecyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-butyl-1-methylpiperidinium bis(trifluoromethyl sulfonyl)imide, 1-methyl-1-propylpyrrolidinium bis(trifluoromethyl sulfonyl)imide, 1-butyl-1-methylpyrrolidinium bis(trifluoromethyl sulfonyl)imide, and methyl trioctyl ammonium bis(trifluoromethyl sulfonyl)imide.

Influence of Small Quantities of Water on the Physical Properties of Alkylammonium Nitrate Ionic Liquids.

This paper presents a comprehensive study of two alkylammonium nitrate ionic liquids. As part of this family of materials, mainly ethylammonium nitrate (EAN) and also propylammonium nitrate (PAN) have attracted a great deal of attention during the last decades due to their potential applications in many fields. Although there have been numerous publications focused on the measurement of their physical properties, a great dispersion can be observed in the results obtained for the same magnitude.

3D structure of the electric double layer of ionic liquid-alcohol mixtures at the electrochemical interface.

Mixtures of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate with amphiphilic cosolvents, such as methanol and ethanol, nanoconfined between graphene walls are studied by means of molecular dynamics simulations and the results are compared with those of the pure ionic liquid and its mixtures with water confined in the same conditions. We investigate the adsorption of cosolvent molecules at the graphene walls as well as their distribution across the system. The results show that, due to a higher affinity of the polar groups to be close to the anions in combination with the electrostatic and excluded volume interactions, there exists a high tendency of the OH groups to lie close to the anode, inducing small changes in the first cation layer.

Solvation of Al cations in bulk and confined protic ionic liquids: a computational study.

Despite the growing interest in the potential electrochemical applications of both aluminium and ionic liquids in batteries, the microstructure of mixtures of trivalent salts and these dense ionic environments is completely unknown. In this work, the solvation of Al3+ cations in highly dense ionic solvents is investigated. For this purpose, molecular dynamics simulations of mixtures of a protic ionic liquid, ethylammonium nitrate (EAN), with aluminium nitrate (Al(NO3)3), both in bulk and confined between graphene walls, are performed.

Molecular dynamics simulations of the structure of mixtures of protic ionic liquids and monovalent and divalent salts at the electrochemical interface.

We perform molecular dynamics simulations of mixtures of a prototypical protic ionic liquid, ethylammonium nitrate, with lithium or magnesium nitrate (LiNO3/Mg(NO3)2) confined between two graphene walls. The structure of the system is analyzed by means of ionic density profiles, angular orientations of ethylammonium cations close to the wall and the lateral structure of the first layer close to the graphene wall. All these results are compared to those of the corresponding aprotic ionic liquid systems, analyzing the influence of the graphene wall charge in the structure of the protic and aprotic mixtures.

The effect of alkyl chain length on the structure and thermodynamics of protic-aprotic ionic liquid mixtures: a molecular dynamics study.

Mixtures of alkylammonium based protic ionic liquids and alkylmethylimidazolium based aprotic ionic liquids were studied by means of molecular dynamics simulations. Close to ideal mixing is observed in most studied magnitudes; however, the effect of increasing alkyl chain length in each of the cations is markedly different, with longer protic cations showing larger deviations, especially with regards to mixing enthalpy, which exhibits a strong compound forming tendency. The compound forming nature of these protic ionic liquids is shown to induce sharp changes in their local environment upon mixing.

Mesostructure and physical properties of aqueous mixtures of the ionic liquid 1-ethyl-3-methyl imidazolium octyl sulfate doped with divalent sulfate salts in the liquid and the mesomorphic states.

This paper extends the study of the induced temperature change in the mesostructure and in the physical properties occurring in aqueous mixtures of the ionic liquid 1-ethyl-3-methyl imidazolium octyl-sulfate [EMIm][OSO4]. For some compositions, these mixtures undergo a phase transition between the liquid (isotropic in the mesoscale) and the mesomorphic state (lyotropic liquid crystalline) at about room temperature. The behavior of mixtures doped with a divalent metal sulfate was investigated in order to observe their applicability as electrolytes.

Two-dimensional pattern formation in ionic liquids confined between graphene walls.

We perform molecular dynamics simulations of ionic liquids confined between graphene walls under a large variety of conditions (pure ionic liquids, mixtures with water and alcohols, mixtures with lithium salts and defective graphene walls). Our results show that the formation of striped and hexagonal patterns in the Stern layer can be considered as a general feature of ionic liquids at electrochemical interfaces, the transition between patterns being controlled by the net balance of charge in the innermost layer of adsorbed molecules. This explains previously reported experimental and computational results and, for the first time, why these pattern changes are triggered by any perturbation of the charge density at the innermost layer of the electric double layer (voltage and composition changes, and vacancies at the electrode walls, among others), which may help tuning electrode-ionic liquid interfaces.

Nanostructured solvation in mixtures of protic ionic liquids and long-chained alcohols.

The structural and dynamical properties of bulk mixtures of long-chained primary and secondary alcohols (propanol, butanol, and 2-pentanol) with protic ionic liquids (ethylammonium and butylammonium nitrate) were studied by means of molecular dynamics simulations and small angle X-ray scattering (SAXS). Changes in the structure with the alcohol concentration and with the alkyl chain length of the alcohol moieties were found, showing variations in the radial distribution function and in the number of hydrogen bonds in the bulk liquids. Moreover, the structural behaviour of the studied mixtures is further clarified with the spatial distribution functions.

Molecular dynamics simulation of the structure and interfacial free energy barriers of mixtures of ionic liquids and divalent salts near a graphene wall.

A molecular dynamics study of mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF]) with magnesium tetrafluoroborate (Mg[BF]) confined between two parallel graphene walls is reported. The structure of the system is analyzed by means of ionic density profiles, lateral structure of the first layer close to the graphene surface and angular orientations of imidazolium cations. Free energy profiles for divalent magnesium cations are calculated using two different methods in order to evaluate the height of the potential barriers near the walls, and the results are compared with those of mixtures of the same ionic liquid and a lithium salt (Li[BF]).

Molecular dynamics simulation of the behaviour of water in nano-confined ionic liquid-water mixtures.

This work describes the behaviour of water molecules in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid under nanoconfinement, between graphene sheets. By means of molecular dynamics simulations, the adsorption of water molecules at the graphene surface is studied. A depletion of water molecules in the vicinity of the neutral and negatively charged graphene surfaces, and their adsorption at the positively charged surface are observed in line with the preferential hydration of the ionic liquid anions.

Molecular dynamics simulations of mixtures of protic and aprotic ionic liquids.

Molecular dynamics simulations of mixtures of the protic ionic liquid ethylammonium nitrate (EAN) and the aprotic 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) are reported and the results are compared with experimental density and electrical conductivity measurements. Essentially ideal mixing of the ionic liquids is seen to take place by means of experimental and simulated excess molar volumes, whose very low values suggest a gradual transition between the structures of the two end constituents of the mixture. A weak dominance of the structure of the protic ionic liquid is nevertheless registered, due to a slight preferential formation of the network of hydrogen bonds, as reflected in the coordination number and the number of hydrogen bonds in the mixture.

Molecular origin of high free energy barriers for alkali metal ion transfer through ionic liquid-graphene electrode interfaces.

In this work we study mechanisms of solvent-mediated ion interactions with charged surfaces in ionic liquids by molecular dynamics simulations, in an attempt to reveal the main trends that determine ion-electrode interactions in ionic liquids. We compare the interfacial behaviour of Li(+) and K(+) at a charged graphene sheet in a room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate, and its mixtures with lithium and potassium tetrafluoroborate salts. Our results show that there are dense interfacial solvation structures in these electrolytes that lead to the formation of high free energy barriers for these alkali metal cations between the bulk and direct contact with the negatively charged surface.

Molecular dynamics simulations of the structure and single-particle dynamics of mixtures of divalent salts and ionic liquids.

We report a molecular dynamics study of the structure and single-particle dynamics of mixtures of a protic (ethylammonium nitrate) and an aprotic (1-butyl-3-methylimidazolium hexaflurophosphate [BMIM][PF6]) room-temperature ionic liquids doped with magnesium and calcium salts with a common anion at 298.15 K and 1 atm. The solvation of these divalent cations in dense ionic environments is analyzed by means of apparent molar volumes of the mixtures, radial distribution functions, and coordination numbers.

Nanostructure of mixtures of protic ionic liquids and lithium salts: effect of alkyl chain length.

The bulk structure of mixtures of two protic ionic liquids, propylammonium nitrate and butylammonium nitrate, with a salt with a common anion, is analyzed at room temperature by means of small angle X-ray scattering and classical molecular dynamics simulations. The study of several structural properties, such as density, radial distribution functions, spatial distribution functions, hydrogen bonds, coordination numbers and velocity autocorrelation functions, demonstrates that increasing the alkyl chain length of the alkylammonium cation results in more segregated, better defined polar and apolar domains, the latter having a larger size. This increase, ascribed to the erosion of the H-bond network in the ionic liquid polar regions as salt is added, is confirmed by means of small angle X-ray scattering measurements, which show a clear linear increase of the characteristic spatial sizes of the studied protic ionic liquids with salt concentration, similar to that previously reported for ethylammonium nitrate (J.

Mixtures of protic ionic liquids and molecular cosolvents: a molecular dynamics simulation.

In this work, the effect of molecular cosolvents (water, ethanol, and methanol) on the structure of mixtures of these compounds with a protic ionic liquid (ethylammonium nitrate) is analyzed by means of classical molecular dynamics simulations. Included are as-yet-unreported measurements of the densities of these mixtures, used to test our parameterized potential. The evolution of the structure of the mixtures throughout the concentration range is reported by means of the calculation of coordination numbers and the fraction of hydrogen bonds in the system, together with radial and spatial distribution functions for the various molecular species and molecular ions in the mixture.

Molecular dynamics simulations of the structure of the graphene-ionic liquid/alkali salt mixtures interface.

We performed molecular dynamics simulations of mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate with lithium tetrafluoroborate and potassium tetrafluoroborate between two charged and uncharged graphene walls, in order to analyze the structure of the well-known formation of layers that takes place on liquids under confinement. For this purpose, we studied the molecular density profiles, free energy profiles for bringing lithium and potassium cations from the bulk mixture to the graphene wall and the orientational distributions of imidazolium rings within the first adsorbed layer as a function of salt concentration and electrode potential. The charge densities in the electrodes were chosen to be zero and ±1 e nm(-2), and the salt molar percentages were %salt = 0, 10 and 25.

Solvation of lithium salts in protic ionic liquids: a molecular dynamics study.

The structure of solutions of lithium nitrate in a protic ionic liquid with a common anion, ethylammonium nitrate, at room temperature is investigated by means of molecular dynamics simulations. Several structural properties, such as density, radial distribution functions, hydrogen bonds, spatial distribution functions, and coordination numbers, are analyzed in order to get a picture of the solvation of lithium cations in this hydrogen-bonded, amphiphilically nanostructured environment. The results reveal that the ionic liquid mainly retains its structure upon salt addition, the interaction between the ammonium group of the cation and the nitrate anion being only slightly perturbed by the addition of the salt.

MD simulations of the formation of stable clusters in mixtures of alkaline salts and imidazolium-based ionic liquids.

Structural and dynamical properties of room-temperature ionic liquids containing the cation 1-butyl-3-methylimidazolium ([BMIM](+)) and three different anions (hexafluorophosphate, [PF6](-), tetrafluoroborate, [BF4](-), and bis(trifluoromethylsulfonyl)imide, [NTf2](-)) doped with several molar fractions of lithium salts with a common anion at 298.15 K and 1 atm were investigated by means of molecular dynamics simulations. The effect of the size of the salt cation was also analyzed by comparing these results with those for mixtures of [BMIM][PF6] with NaPF6.

Electrical conductivity of seven binary systems containing 1-ethyl-3-methyl imidazolium alkyl sulfate ionic liquids with water or ethanol at four temperatures.

We present experimental measurements of specific electrical (or ionic) conductivity of seven binary systems of 1-ethyl-3-methyl imidazolium alkyl sulfate (EMIM-C(n)S) with water or ethanol. Electrical conductivity was measured at 298.15 K in all ranges of concentrations and selected mixtures also at 288.

Surface tension of binary mixtures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids: experimental measurements and soft-SAFT modeling.

Ionic liquids have attracted a large amount of interest in the past few years. One approach to better understand their peculiar nature and characteristics is through the analysis of their surface properties. Some research has provided novel information on the organization of pure ionic liquids at the vapor-liquid interface; yet, a systematic study on the surface properties of mixtures of ionic liquids and their organization at the surface has not previously been carried out in the literature.

Effect of temperature and cationic chain length on the physical properties of ammonium nitrate-based protic ionic liquids.

We report a systematic study of the effect of the cationic chain length and degree of hydrogen bonding on several equilibrium and transport properties of the first members of the alkylammonium nitrate protic ionic liquids (PILs) family (ethylammonium, propylammonium, and butylammonium nitrate) in the temperature range between 10 and 40 °C. These properties were observed by means of several experimental techniques, including density, surface tension, refractometry, viscosimetry, and conductimetry. The dilatation coefficients and compressibilities, as well as the Rao coefficients, were calculated, and an increase of these magnitudes with alkyl chain length was detected.

Investigation of the local structure of mixtures of an ionic liquid with polar molecular species through molecular dynamics: cluster formation and angular distributions.

In this work, we used molecular dynamics simulations to analyze in detail the spatial distributions of the different constituents in mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate with three polar molecular species: water and two alcohols of different chain lengths (methanol and ethanol). In particular, we report results regarding the influence of the chosen species and its concentration on the formation of ionic and molecular clusters over the whole miscibility range, as well as on the angular distribution of polar molecules around the anion and the cation in these systems. Both analyses showed that addition of a molecular species breaks down the polar network of the pure ionic liquid in clusters whose mean size decreases progressively as more molecules are added.