Thin GaO Layers by Thermal Oxidation of van der Waals GaSe Nanostructures for Ultraviolet Photon Sensing.

Two-dimensional semiconductors (2DSEM) based on van der Waals crystals offer important avenues for nanotechnologies beyond the constraints of Moore's law and traditional semiconductors, such as silicon (Si). However, their application necessitates precise engineering of material properties and scalable manufacturing processes. The ability to oxidize Si to form silicon dioxide (SiO) was crucial for the adoption of Si in modern technologies.

Cathodoluminescence spectroscopy of monolayer hexagonal boron nitride.

Cathodoluminescence (CL) spectroscopy is a suitable technique for studying the luminescent properties of optoelectronic materials because CL has no limitation on the excitable bandgap energy and eliminates ambiguous signals due to simple light scattering and resonant Raman scattering potentially involved in the photoluminescence spectra. However, direct CL measurements of atomically thin two-dimensional materials have been difficult due to the small excitation volume that interacts with high-energy electron beams. Herein, distinct CL signals from a monolayer hexagonal BN (hBN), namely mBN, epitaxial film grown on a graphite substrate are shown by using a CL system capable of large-area and surface-sensitive excitation.

Wafer-Scale Two-Dimensional Semiconductors for Deep UV Sensing.

2D semiconductors (2SEM) can transform many sectors, from information and communication technology to healthcare. To date, top-down approaches to their fabrication, such as exfoliation of bulk crystals by "scotch-tape," are widely used, but have limited prospects for precise engineering of functionalities and scalability. Here, a bottom-up technique based on epitaxy is used to demonstrate high-quality, wafer-scale 2SEM based on the wide band gap gallium selenide (GaSe) compound.

Optical Monitoring of Iron Loading into Single, Native Ferritin Proteins.

Ferritin is a protein that stores and releases iron to prevent diseases associated with iron dysregulation in plants, animals, and bacteria. The conversion between iron-loaded holo-ferritin and empty apo-ferritin is an important process for iron regulation. To date, studies of ferritin have used either ensemble measurements to quantify the characteristics of a large number of proteins or single-molecule approaches to interrogate labeled or modified proteins.

Photo-engineered optoelectronic properties of indium tin oxide via reactive laser annealing.

Transparent conductive oxides are appealing materials for optoelectronic and plasmonic applications as, amongst other advantages, their properties can be modulated by engineering their defects. Optimisation of this adjustment is, however, a complex design problem. This work examined the modification of the carrier transport properties of sputtered tin-doped indium oxide (ITO) via laser annealing in reactive environments.

Identifying carbon as the source of visible single-photon emission from hexagonal boron nitride.

Single-photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered increasing attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN via various bottom-up synthesis methods and directly through ion implantation, we provide direct evidence that the visible SPEs are carbon related.

Direct band-gap crossover in epitaxial monolayer boron nitride.

Hexagonal boron nitride is a large band-gap insulating material which complements the electronic and optical properties of graphene and the transition metal dichalcogenides. However, the intrinsic optical properties of monolayer boron nitride remain largely unexplored. In particular, the theoretically expected crossover to a direct-gap in the limit of the single monolayer is presently not confirmed experimentally.

High-Temperature Molecular Beam Epitaxy of Hexagonal Boron Nitride with High Active Nitrogen Fluxes.

Hexagonal boron nitride (hBN) has attracted a great deal of attention as a key component in van der Waals (vdW) heterostructures, and as a wide band gap material for deep-ultraviolet devices. We have recently demonstrated plasma-assisted molecular beam epitaxy (PA-MBE) of hBN layers on substrates of highly oriented pyrolytic graphite at high substrate temperatures of ~1400 °C. The current paper will present data on the high-temperature PA-MBE growth of hBN layers using a high-efficiency radio-frequency (RF) nitrogen plasma source.

Moiré-Modulated Conductance of Hexagonal Boron Nitride Tunnel Barriers.

Monolayer hexagonal boron nitride (hBN) tunnel barriers investigated using conductive atomic force microscopy reveal moiré patterns in the spatial maps of their tunnel conductance consistent with the formation of a moiré superlattice between the hBN and an underlying highly ordered pyrolytic graphite (HOPG) substrate. This variation is attributed to a periodc modulation of the local density of states and occurs for both exfoliated hBN barriers and epitaxially grown layers. The epitaxial barriers also exhibit enhanced conductance at localized subnanometer regions which are attributed to exposure of the substrate to a nitrogen plasma source during the high temperature growth process.

An atomic carbon source for high temperature molecular beam epitaxy of graphene.

We report the use of a novel atomic carbon source for the molecular beam epitaxy (MBE) of graphene layers on hBN flakes and on sapphire wafers at substrate growth temperatures of ~1400 °C. The source produces a flux of predominantly atomic carbon, which diffuses through the walls of a Joule-heated tantalum tube filled with graphite powder. We demonstrate deposition of carbon on sapphire with carbon deposition rates up to 12 nm/h.

Hexagonal Boron Nitride Tunnel Barriers Grown on Graphite by High Temperature Molecular Beam Epitaxy.

We demonstrate direct epitaxial growth of high-quality hexagonal boron nitride (hBN) layers on graphite using high-temperature plasma-assisted molecular beam epitaxy. Atomic force microscopy reveals mono- and few-layer island growth, while conducting atomic force microscopy shows that the grown hBN has a resistance which increases exponentially with the number of layers, and has electrical properties comparable to exfoliated hBN. X-ray photoelectron spectroscopy, Raman microscopy and spectroscopic ellipsometry measurements on hBN confirm the formation of sp-bonded hBN and a band gap of 5.

Strain-Engineered Graphene Grown on Hexagonal Boron Nitride by Molecular Beam Epitaxy.

Graphene grown by high temperature molecular beam epitaxy on hexagonal boron nitride (hBN) forms continuous domains with dimensions of order 20 μm, and exhibits moiré patterns with large periodicities, up to ~30 nm, indicating that the layers are highly strained. Topological defects in the moiré patterns are observed and attributed to the relaxation of graphene islands which nucleate at different sites and subsequently coalesce. In addition, cracks are formed leading to strain relaxation, highly anisotropic strain fields, and abrupt boundaries between regions with different moiré periods.

High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures.

High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures is achieved by exploiting the broad-band transparency of graphene, the direct bandgap of InSe, and the favorable band line up of InSe with graphene. The photoresponsivity exceeds that for other van der Waals heterostructures and the spectral response extends from the near-infrared to the visible spectrum.

Lung function measurement with multiple-breath-helium washout system.

Multiple-breath-washout (MBW) measurements are regarded as a sensitive technique which can reflect the ventilation inhomogeneity of respiratory airways. Typically nitrogen is used as the tracer gas and is washed out by pure oxygen in multiple-breath-nitrogen washout (MBNW) tests. In this study, instead of using nitrogen, (4)He is used as the tracer gas with smaller gas density which may be able to reach deeper into our lungs in a given time and the helium washout results may be more sensitive to the ventilation inhomogeneity in small airways.

Low-temperature and high magnetic field dynamic scanning capacitance microscope.

We demonstrate a dynamic scanning capacitance microscope (DSCM) that operates at large bandwidths, cryogenic temperatures, and high magnetic fields. The setup is based on a noncontact atomic force microscope (AFM) with a quartz tuning fork sensor for the nonoptical excitation and readout in topography, force, and dissipation measurements. The metallic AFM tip forms part of a rf resonator with a transmission characteristics modulated by the sample properties and the tip-sample capacitance.

Resistance noise scaling in a dilute two-dimensional hole system in GaAs.

We have measured the resistance noise of a two-dimensional (2D) hole system in a high mobility GaAs quantum well, around the 2D metal-insulator transition (MIT) at zero magnetic field. The normalized noise power S(R)/R(2) increases strongly when the hole density p(s) is decreased, increases slightly with temperature (T) at the largest densities, and decreases strongly with T at low p(s). The noise scales with the resistance, S(R)/R(2) approximately R2.

Probing the vapor-liquid phase behaviors of near-critical and supercritical fluids using a shear mode piezoelectric sensor.

With the rapidly expanding industrial and research applications of near-critical and supercritical technology there is a pressing need for a simple and inexpensive sensor that may be used to determine the phase coexistence regions of fluid mixtures and to establish whether a fluid system is below, at, or above, a critical point. Mechanically vibrating AT-cut quartz plates may be used to determine the product of the fluid density and viscosity of a fluid in which it is immersed, through measurement of the impedance minimum of the electrical equivalent circuit or of the corresponding frequency. The density-viscosity product changes abruptly between fluid phases and rapidly along the isotherm corresponding to the critical temperature, enabling such a plate to act as a sensor of these fluid features.