Confocal Raman Microscopy with Adaptive Optics.

Confocal Raman microscopy, a highly specific and label-free technique for the microscale study of thick samples, often presents difficulties due to weak Raman signals. Inhomogeneous samples introduce wavefront aberrations that further reduce these signals, requiring even longer acquisition times. In this study, we introduce Adaptive Optics to confocal Raman microscopy for the first time to counteract such aberrations, significantly increasing the Raman signal and image quality.

3D nanoprinted catadioptric fiber sensor for dual-axis distance measurement during vitrectomy.

Retinal damage is a common intraoperative complication during vitrectomy, caused by a complex interplay between the suction of the vitrectome, the cut- and aspiration rate, and the distance of the instrument to the retina. To control this last factor, we developed two miniaturized fiber-optic distance sensors based on low-coherence interferometry for direct integration into the vitrectome. Both sensors have a diameter of 250 µm, which makes them compatible with a 25G vitrectome.

Optofluidic adaptive optics in multi-photon microscopy.

Adaptive optics, in combination with multi-photon techniques, is a powerful approach to image deep into a specimen. Remarkably, virtually all adaptive optics schemes today rely on wavefront modulators that are reflective, diffractive or both. This, however, can pose a severe limitation for applications.

Analysis of assembly tolerance compensation in microscope objectives with a free-form element at the aperture stop.

We analyze the feasibility of using refractive free-form phase plates at the aperture stop of microscope objectives as an alternative to active alignment to compensate for assembly tolerances. The method involves the determination of misalignment-induced aberrations at the exit pupil, and transferring them to the aperture stop while taking pupil aberrations into consideration. We demonstrate that despite being able to correct only for field-independent aberrations, this method can restore near-diffraction-limited imaging performance of passively aligned systems with practical tolerances, given that the as-designed system is highly corrected.