Rational Design of Ultrahigh-Loading Ir Single Atoms on Reconstructed Mn─NiOOH for Enhanced Catalytic Performance in Urea-Water Electrolysis.

Investigating advanced electrocatalysts is crucial for improving the efficacy of water splitting to generate environmentally friendly fuel. The discovery of highly effective electrocatalysts, capable of driving oxygen evolution reaction (OER) and urea oxidation reaction (UOR) in urea-alkaline environments, is pivotal for advancing large-scale hydrogen production. This study aims to introduce a new method that involves creating nanosheets of high-loading iridium single atoms embedded in a manganese-containing nickel oxyhydroxide matrix (Ir@Mn─NiOOH).

Self-Assembled Nanocomposites and Nanostructures for Environmental and Energic Applications.

With the rapid development of nanotechnology, nanocomposites and nanostructures have attracted significant attention due to their unique physical and chemical properties and variable functionalities [...

A Facile Fabrication of Ordered Mesoporous Carbons Derived from Phenolic Resin and Mesophase Pitch via a Self-Assembly Method.

Ordered and disordered mesoporous structures were synthesized by a self-assembly method using a mixture of phenolic resin and petroleum-based mesophase pitch as the starting materials, amphiphilic triblock copolymer F127 as a soft template, hydrochloric acid as a catalyst, and distilled water as a solvent. Then, mesoporous carbons were obtained via autoclave method at low temperature (60 °C) and then carbonization at a relatively low temperature (600 °C), respectively. X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM) analyses revealed that the porous carbons with a mesophase pitch content of approximately 10 wt% showed a highly ordered hexagonal mesostructure with a highly uniform pore size of ca.

In vitro toxicological assessment and biosensing potential of bioinspired chitosan nanoparticles, selenium nanoparticles, chitosan/selenium nanocomposites, silver nanoparticles and chitosan/silver nanocomposites.

Hydrogen peroxide (HO) is widely used in various industries and biological fields. HO rapidly contaminants with water resources and hence simple detection process is highly wanted in various fields. The present study was focused on the biosensing, antimicrobial and embryotoxicity of bioinspired chitosan nanoparticles (Cs NPs), selenium nanoparticles (Se NPs), chitosan/selenium nanocomposites (Cs/Se NCs), silver nanoparticles (Ag NPs) and chitosan/silver nanocomposites (Cs/Ag NCs) synthesized using the aqueous Cucurbita pepo Linn.

Preparation of Network-Structured Carbon Nanofiber Mats Based on PAN Blends Using Electrospinning and Hot-Pressing Methods for Supercapacitor Applications.

In this work, we prepared network-structured carbon nanofibers using polyacrylonitrile blends (PAN150 and PAN85) with different molecular weights (150,000 and 85,000 g mol) as precursors through electrospinning/hot-pressing methods and stabilization/carbonization processes. The obtained PAN150/PAN85 polymer nanofibers (PNFs; PNF-73, PNF-64 and PNF-55) with different weight ratios of 70/30, 60/40 and 50/50 () provided good mechanical and electrochemical properties due to the formation of physically bonded network structures between the blended PAN nanofibers during the hot-processing/stabilization processes. The resulting carbonized PNFs (cPNFs; cPNF-73, cPNF-64, and cPNF-55) were utilized as anode materials for supercapacitor applications.

Modish Designation of Hollow-Tubular rGO-NiMoO@Ni-Co-S Hybrid Core-shell Electrodes with Multichannel Superconductive Pathways for High-Performance Asymmetric Supercapacitors.

The scrupulous designation of hollow and porous electroactive materials incorporating prolific redox-active polyphase transition-metal oxide decorated with polyphase transition-metal sulfide onto rGO (reduced graphene oxide)-supported conductive substrate has never been an easy task due to the very good coordination affair of sulfur toward transition metals. Herein, cost-effective hydrothermal growth followed by a metal-organic framework (MOF)-mediated sulfidation approach is employed to achieve burl-like Ni-Co-S nanomaterial-integrated hollow and porous NiMoO nanotubes onto rGO-coated Ni foam (rGO-NiMoO@Ni-Co-S) as the electrode material for supercapacitors. The open framework of the rGO-Co-MOF template after the etching and sulfidation process not only enables the creation of a tubular structure of NiMoO nanorods but also provides convenient ion-electron pathways to promote rapid faradic reactions for the hybrid composite electrode.

CoMnO-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications.

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO-coated and FeO-coated carbon fibers were used as the cathode and the anode materials, respectively.

Relationship Between Functionalized Multi-Walled Carbon Nanotubes and Damping Properties of Multi-Walled Carbon Nanotubes/Carbon Fiber-Reinforced Plastic Composites for Shaft.

The mechanical properties and damping behavior of carbon fiber-reinforced plastic composites with functionalized multi-walled carbon nanotubes were examined. The functionalized multi-walled carbon nanotubes were blended with epoxy resins to prepare multi-walled carbon nanotubes/carbon fiber-reinforced plastic composites. The dispersion properties of functionalized multi-walled carbon nanotubes in epoxy resins were examined using surface free energy.

Oxalic acid assisted rapid synthesis of mesoporous NiCoO nanorods as electrode materials with higher energy density and cycle stability for high-performance asymmetric hybrid supercapacitor applications.

In this study, mesoporous nickel cobaltite (NiCoO) nanorods as electrode materials for high-performance hybrid supercapacitor were fabricated onto Ni foam by a simple and cost effective oxalic acid (OA) assisted rapid co-precipitation method. The effects of different metal precursors (NCO-Nitrate, NCO-Chloride and NCO-Acetate) on the electrochemical capacitive properties were studied. FE-SEM analysis confirmed that all samples exhibited highly dense mesoporous NiCoO nanorods vertically grown on the surface of Ni foam with excess accessible surfaces and unique sizes and morphologies.

Extremely Foldable and Highly Transparent Nanofiber-Based Electrodes for Liquid Crystal Smart Devices.

The nylon 6 nanofiber-reinforced cellulose acetate (NF-r-CA) film as a fiber-based transparent substrate is used to develop the highly transparent electrodes with excellent durable and extremely foldable properties. Mechanical properties of the NF-r-CA films are greatly improved, suggesting that the nanofibers provide an effective reinforcement. The NF-r-CA transparent films show smooth surface morphologies (R ~ 27 nm) than as-spun nylon 6 nanofiber membrane, indicating the successful infiltration of cellulose acetate into the voids of nylon nanofiber membranes.

NiCoS nanosheet-decorated 3D, porous Ni film@Ni wire electrode materials for all solid-state asymmetric supercapacitor applications.

Wire type supercapacitors with high energy and power densities have generated considerable interest in wearable applications. Herein, we report a novel NiCoS-decorated 3D, porous Ni film@Ni wire electrode for high performance supercapacitor application. In this work, a facile method is introduced to fabricate a 3D, porous Ni film deposited on a Ni wire as a flexible electrode, followed by decoration with NiCoS as an electroactive material.

Facile green synthesis of silver nanodendrite/cellulose acetate thin film electrodes for flexible supercapacitors.

In this study, we present a highly efficient and economical solution called as 'in situ hydrogenation' for preparation of highly conductive thin film electrode based on silver nanodendrites. The silver nanodendrite (AgND)/cellulose acetate (CA) thin film electrodes exhibited sheet resistance ranging from 0.32ohm/sq to 122.

Hierarchically Assembled Nanofibers Created by a Layer-by-Layer Self-Assembly.

We report the hierarchically assembled nanofibers created by LbL self-assembly depending on the PSS-PAA fraction in the blend solutions and pH during bulid-up of the PAH/(PSS-PAA) multilayer films. The multilayer [(PEI/blend)/(PAH/blend)4] films with ρPAA (PSS-PAA fraction in the blend solutions) = 0.0 in the blend solution exhibited surface morphologies of randomly isolated globular clusters, while at ρPAA = 0.

Facile Synthesis of Core/Shell-like NiCo2O4-Decorated MWCNTs and its Excellent Electrocatalytic Activity for Methanol Oxidation.

The design and development of an economic and highly active non-precious electrocatalyst for methanol electrooxidation is challenging due to expensiveness of the precursors as well as processes and non-ecofriendliness. In this study, a facile preparation of core-shell-like NiCo2O4 decorated MWCNTs based on a dry synthesis technique was proposed. The synthesized NiCo2O4/MWCNTs were characterized by infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and selected area energy dispersive spectrum.

Effect of Microgravity on Fungistatic Activity of an α-Aminophosphonate Chitosan Derivative against Aspergillus niger.

Biocontamination within the international space station is ever increasing mainly due to human activity. Control of microorganisms such as fungi and bacteria are important to maintain the well-being of the astronauts during long-term stay in space since the immune functions of astronauts are compromised under microgravity. For the first time control of the growth of an opportunistic pathogen, Aspergillus niger, under microgravity is studied in the presence of α-aminophosphonate chitosan.

Effect of discarded keratin-based biocomposite hydrogels on the wound healing process in vivo.

Biocompatible keratin-based hydrogels prepared by electron beam irradiation (EBI) were examined in wound healing. As the EBI dose increased to 60 kGy, the tensile strength of the hydrogels increased, while the percentage of elongation of the hydrogels decreased. After 7 days, the dehydrated wool-based hydrogels show the highest mechanical properties (the % elongation of 1341 and the tensile strength of 6030 g/cm(2) at an EBI dose of 30 kGy).

Molecular Composite Coatings on Nafion Using Layer-by-Layer Self-Assembly.

Controlled growth of nanometer-scale multilayered coatings of negatively charged sulfonated poly(benzobisimidazole) (SPBI), complexed with positively charged poly(2-vinylpyridine) (P2VP) on quartz, and Nafion membrane as substrates has been explored. Both polymers, SPBI and P2VP, possess a net charge in methanol as a result of the dissolution of SPBI by complexation with triethylamine (TEA) and the protonation of P2VP with HCl, respectively, and thereby can form a multilayered molecular composite of alternating anionic SPBI and cationic P2VP via an electrostatic layer-by-layer (LbL) self-assembly. UV-vis absorption spectrophotometry was used to monitor the buildup and growth rate of such SPBI/P2VP multilayer films.

Facile fabrication of hierarchical cellulose nanospicules via hydrolytic hydrogenation.

A new spicule-like cellulose nanostructure is prepared from electrospun cellulose nanofibers using a one-pot bifunctional catalysis strategy namely hydrolytic hydrogenation. The electrospun cellulose nanofibers or cellulose film was treated in presence of catalyst consisting of an alkali and a metal to produce celluloses with structures like nanospicules, nanoflowers or nanorods, respectively. This work highlights the promising combination of electrospinning and hydrolysis/hydrogenation for facile production of hierarchical cellulose nanostructures such as nanospicules and nanorods.

Preparation and characterization of keratin-based biocomposite hydrogels prepared by electron beam irradiation.

The biocompatible and highly porous keratin-based hydrogels were prepared using electron beam irradiation (EBI). The conditions for keratin-based hydrogel formation were investigated depending on several conditions, including the presence of poly(vinyl alcohol) (PVA), concentration of keratin solution, EBI dose, and poly(ethylene imine) (PEI) additives. The pure keratin (human hair and wool) aqueous solution was not gelled by EBI, while the aqueous keratin solutions blended with PVA were gelled at an EBI dose of more than 90 kGy.

Mechanical and electromagnetic interference shielding Properties of poly(vinyl alcohol)/graphene and poly(vinyl alcohol)/multi-walled carbon nanotube composite nanofiber mats and the effect of Cu top-layer coating.

We report the mechanical property and electromagnetic interference shielding effectiveness (EMI SE) of poly(vinyl alcohol) (PVA)/graphene and PVA/multi-walled carbon nanotube (MWCNT) composite nanofibers prepared by electrospinning. The metal (Cu) was deposited on the resultant PVA composite nanofibers using metal deposition technique in order to improve the mechanical properties and EMI shielding properties. The resulting PVA composite nanofibers and Cu-deposited corresponding nanofibers were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and wide angle X-ray diffraction (WAXD).

Osteoblastic cells culture on electrospun poly(ε-caprolacton) scaffolds incorporating amphiphilic PEG-POSS telechelic.

In this work, novel poly(ε-caprolactone) (PCL) fibrous membranes incorporating amphiphilic polyhedral oligosilsesquioxane (POSS) telechelic (PEG-POSS telechelic) were prepared via electrospinning. The unique microstructure, morphology, thermal stability of the resulting PCL/PEG-POSS telechelic electrospun nanowebs were investigated by X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis, respectively. The addition of amphiphilic PEG-POSS telechelic strongly influenced the fiber diameters, microstructures of the resultant PCL/PEG-POSS telechelic nanofibers, compared to pure PCL nanofibers.

Fabrication and characterization of II-VI semiconductor nanoparticles decorated electrospun polyacrylonitrile nanofibers.

Semiconductor nanoparticles incorporated highly aligned electrospun polyacrylonitrile (PAN) composite nanofibers were obtained via a simple, scalable and low-cost dip coating technique at room temperature. The resultant PAN nanofibers exhibited good incorporation of CdS, ZnS and CoS semiconductor nanoparticles. The detailed characterizations of these composite nanofibers were investigated.

Thermal insulation, antibacterial and mold properties of breathable nanofiber-laminated wallpapers.

We studied the thermal insulation, antibacterial and mold properties of the nanofiber laminated wallpapers prepared by laminate-coating using electrospinning method. The thermal insulation capability of the nanofiber laminated wallpapers was evaluated by using a home-made insulated environmental chamber under different environmental conditions. It was found that the nanofiber laminated wallpapers exhibited better thermal insulation performance than the conventional silk wallpaper, which was commercialized silk wallpapers prepared by polyacrylic resin, suggesting that the laminate-coated nanofiber layer played an effective role in thermal insulation.

Effect of nanorough surface in evaluating the handle of nanofiber web.

The effect of frictional coefficient on handle measurement of the nanofiber webs was studied by using a home-made apparatus. The instrument measures directly the frictional coefficient between the finger and the nanofiber web. The stick-slip phenomenon was observed in friction of polyurethane (PU) nanofiber webs and nylon nanofiber laminate-coated nylon 6 fabrics above the critical load of approximately 1 N.