Luminance enhancement of top-emitting blue organic light emitting diodes encapsulated with silicon nitride thin films by a double-layer nano-structure.

Even though it is in high demand to introduce a nano-structure (NS) light extraction technology on a silicon nitride to be used as a thin film encapsulation material for an organic light-emitting diode (OLED), only an industry-incompatible wet method has been reported. This work demonstrates a double-layer NS fabrication on the silicon nitride using a two-step organic vapor phase deposition (OVPD) of an industry-compatible dry process. The NS showed a wrinkle-like shape caused by coalescence of the nano-lenses.

Metal oxide charge transfer complex for effective energy band tailoring in multilayer optoelectronics.

Metal oxides are intensively used for multilayered optoelectronic devices such as organic light-emitting diodes (OLEDs). Many approaches have been explored to improve device performance by engineering electrical properties. However, conventional methods cannot enable both energy level manipulation and conductivity enhancement for achieving optimum energy band configurations.

Organic/Inorganic Hybrid Thin-Film Encapsulation Using Inkjet Printing and PEALD for Industrial Large-Area Process Suitability and Flexible OLED Application.

We present herein the first report of organic/inorganic hybrid thin-film encapsulation (TFE) developed as an encapsulation process for mass production in the display industry. The proposed method was applied to fabricate a top-emitting organic light-emitting device (TEOLED). The organic/inorganic hybrid TFE has a 1.

Identification of a multi-stack structure of graphene electrodes doped layer-by-layer with benzimidazole and its implication for the design of optoelectronic devices.

Optical properties of benzimidazole (BI)-doped layer-by-layer graphene differ significantly from those of intrinsic graphene. Our study based on transmission electron microscopy and X-ray photoelectron spectroscopy depth profiling reveals that such a difference stems from its peculiar stratified geometry formed in situ during the doping process. This work presents an effective thickness and optical constants that can treat these multi-stacked BI-doped graphene electrodes as a single equivalent medium.

Surface wrinkle formation by liquid crystalline polymers for significant light extraction enhancement on quantum dot light-emitting diodes.

We propose an optimal outcoupling structure of a quantum-dot light-emitting diode (QLED) and present material properties based on numerical calculations via the ray-tracing method, in which light extraction properties are obtained according to the surface wrinkles on a substrate. After analyzing the designed microstructure elements, the optimal model was derived and applied to the QLEDs; consequently, the outcoupling efficiency enhanced by 31%. The liquid crystalline polymer forming the random surface wrinkles not only achieves an excellent light extraction through plasma crosslinking but also facilitates large-area processes.

Thin-film transistor-driven vertically stacked full-color organic light-emitting diodes for high-resolution active-matrix displays.

Thin-film transistor (TFT)-driven full-color organic light-emitting diodes (OLEDs) with vertically stacked structures are developed herein using photolithography processes, which allow for high-resolution displays of over 2,000 pixels per inch. Vertical stacking of OLEDs by the photolithography process is technically challenging, as OLEDs are vulnerable to moisture, oxygen, solutions for photolithography processes, and temperatures over 100 °C. In this study, we develop a low-temperature processed AlO/SiN bilayered protection layer, which stably protects the OLEDs from photolithography process solutions, as well as from moisture and oxygen.

Color-tunable organic light-emitting diodes with vertically stacked blue, green, and red colors for lighting and display applications.

We demonstrate independently and simultaneously controlled color-tunable organic light-emitting diodes (OLEDs) with vertically stacked blue, green, and red elements. The blue, green, and red elements were placed at the bottom, middle, and top positions, respectively, forming color-tunable OLEDs. The independently driven blue, green, and red elements in the color-tunable OLEDs exhibited low driving voltages of 5.

Mechanistic Understanding of Improved Performance of Graphene Cathode Inverted Organic Light-Emitting Diodes by Photoemission and Impedance Spectroscopy.

Modification of multilayer graphene films was investigated for a cathode of organic light-emitting diodes (OLEDs). By doping the graphene/electron transport layer (ETL) interface with Li, the driving voltage of the OLED was reduced dramatically from 24.5 to 3.

Overcoming the efficiency limit of organic light-emitting diodes using ultra-thin and transparent graphene electrodes.

We propose an effective way to enhance the out-coupling efficiencies of organic light-emitting diodes (OLEDs) using graphene as a transparent electrode. In this study, we investigated the detrimental adsorption and internal optics occurring in OLEDs with graphene anodes. The optical out-coupling efficiencies of previous OLEDs with transparent graphene electrodes barely exceeded those of OLEDs with conventional transparent electrodes because of the weak microcavity effect.

Unraveled Face-Dependent Effects of Multilayered Graphene Embedded in Transparent Organic Light-Emitting Diodes.

With increasing demand for transparent conducting electrodes, graphene has attracted considerable attention, owing to its high electrical conductivity, high transmittance, low reflectance, flexibility, and tunable work function. Two faces of single-layer graphene are indistinguishable in its nature, and this idea has not been doubted even in multilayered graphene (MLG) because it is difficult to separately characterize the front (first-born) and the rear face (last-born) of MLG by using conventional analysis tools, such as Raman and ultraviolet spectroscopy, scanning probe microscopy, and sheet resistance. In this paper, we report the striking difference of the emission pattern and performance of transparent organic light-emitting diodes (OLEDs) depending on the adopted face of MLG and show the resolved chemical and physical states of both faces by using depth-selected absorption spectroscopy.

Stable angular emission spectra in white organic light-emitting diodes using graphene/PEDOT:PSS composite electrode.

In this work, we suggest a graphene/ poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) composite as a transparent electrode for stabilizing white emission of organic light-emitting diodes (OLEDs). Graphene/PEDOT:PSS composite electrodes have increased reflectance when compared to graphene itself, but their reflectance is still lower than that of ITO itself. Changes in the reflectance of the composite electrode have the advantage of suppressing the angular spectral distortion of white emission OLEDs and achieving an efficiency of 16.

A nanoporous polymer film as a diffuser as well as a light extraction component for top emitting organic light emitting diodes with a strong microcavity structure.

To improve the viewing angle characteristic as well as the light extraction effect of strong microcavity devices, we fabricated a nanoporous polymer film (NPF) as a scattering medium as well as a light extraction component. We designed two types of organic light emitting diodes (OLEDs) with a strong microcavity effect by changing the thickness of the hole transport layer (HTL; e.g.

Flexion bonding transfer of multilayered graphene as a top electrode in transparent organic light-emitting diodes.

Graphene has attracted considerable attention as a next-generation transparent conducting electrode, because of its high electrical conductivity and optical transparency. Various optoelectronic devices comprising graphene as a bottom electrode, such as organic light-emitting diodes (OLEDs), organic photovoltaics, quantum-dot LEDs, and light-emitting electrochemical cells, have recently been reported. However, performance of optoelectronic devices using graphene as top electrodes is limited, because the lamination process through which graphene is positioned as the top layer of these conventional OLEDs is a lack of control in the surface roughness, the gapless contact, and the flexion bonding between graphene and organic layer of the device.

Exciton dissociation and charge-transport enhancement in organic solar cells with quantum-dot/N-doped CNT hybrid nanomaterials.

The incorporation of InP quantum-dot/N-doped multiwalled carbon nanotube (QD:NCNT) nanohybrids in the active layer of poly(3-hexylthiophene)/indene-C60 bisadduct (P3HT/ICBA) bulk-heterojuction solar cells enhances V(OC) and J(SC) . The QDs encourage exciton dissociation by promoting electron transfer, while the NCNTs enhance the transport of the separated electrons and eventual charge collection. Such a synergistic effect successfully improves the power conversion efficiency (PCE) from 4.

Position-controlled ZnO nanoflower arrays grown on glass substrates for electron emitter application.

The electron emission of position-controlled grown ZnO nanoflowers was investigated for application in cold cathode electron emission devices. ZnO nanoflower arrays, composed of several nanoneedles with sharp tips, were grown selectively on a conducting glass substrate using a chemical solution deposition method. The morphology and position of the ZnO nanoflowers were controlled by preparing polymethylmethacrylate submicron patterns using electron-beam lithography.