Printable, stretchable metal-vapor-desorption layers for high-fidelity patterning in soft, freeform electronics.

High-fidelity patterning of thin metal films on arbitrary soft substrates promises integrated circuits and devices that can significantly augment the morphological functionalities of freeform electronics. However, existing patterning methods that decisively rely on prefabricated rigid masks are severely incompatible with myriad surfaces. Here, we report printable, stretchable metal-vapor-desorption layers (s-MVDLs) that can enable high-fidelity patterning of thin metal films on freeform polymeric surfaces.

Drug Delivery Systems for Personal Healthcare by Smart Wearable Patch System.

Smart wearable patch systems that combine biosensing and therapeutic components have emerged as promising approaches for personalized healthcare and therapeutic platforms that enable self-administered, noninvasive, user-friendly, and long-acting smart drug delivery. Sensing components can continuously monitor physiological and biochemical parameters, and the monitoring signals can be transferred to various stimuli using actuators. In therapeutic components, stimuli-responsive carrier-based drug delivery systems (DDSs) provide on-demand drug delivery in a closed-loop manner.

Crack-inducing Strain Sensor Array using Inkjet-Printed Silver Thin Film for Underplate and Off-centered Force Sensing Applications.

The change in resistance upon bending in metal films as thick as 1 mm used for underpanel force touch applications is limited by the low sensitivity, thus requiring high-performance readout circuitry. In this paper, we report inkjet-printed silver thin films having crack-inducing underlayers, which further increases the sensitivity of their resistance changes under deformation. This allows for detecting weak vertical forces even through the plates (force-receiving layer), such as 0.

Nonpatterned Soft Piezoresistive Films with Filamentous Conduction Paths for Mimicking Multiple-Resolution Receptors of Human Skin.

Soft pressure sensors play key roles as input devices of electronic skin (E-skin) to imitate real human skin. For efficient data acquisition according to stimulus types such as detailed pressure images or macroscopic strength of stimuli, soft pressure sensors can have variable spatial resolution, just like the uneven spatial distribution of pressure-sensing receptors on the human body. However, previous methods on soft pressure sensors cannot achieve such tunability of spatial resolution because their sensor materials and read-out electrodes need to be elaborately patterned for a specific sensor density.

Recent progress in strain-engineered elastic platforms for stretchable thin-film devices.

Strain-engineered elastic platforms that can efficiently distribute mechanical stress under deformation offer adjustable mechanical compliance for stretchable electronic systems. By fully exploiting strain-free regions that are favourable for fabricating thin-film devices and interconnecting with reliably stretchable conductors, various electronic systems can be integrated onto stretchable platforms with the assistance of strain engineering strategies. Over the last decade, applications of multifunctional stretchable thin-film devices simultaneously exhibiting superior electrical and mechanical performance have been demonstrated, shedding light on the realization of further reliable human-machine interfaces.

Electronic Skin Based on a Cellulose/Carbon Nanotube Fiber Network for Large-Area 3D Touch and Real-Time 3D Surface Scanning.

Electronic skin (E-skin) based on tactile sensors has great significance in next-generation electronics such as biomedical application and artificial intelligence that requires interaction with humans. To mimic the properties of human skin, high flexibility, excellent sensing capability, and sufficient spatial resolution through high-level sensor integration are required. Here, we report a highly sensitive pressure sensor matrix based on a piezoresistive cellulose/single-walled carbon nanotube-entangled fiber network, which forms its own porous structure enabling a superior pressure sensor with a high sensitivity (9.

Inkjet-Printing-Based Density Profile Engineering of Single-Walled Carbon Nanotube Networks for Conformable High-On/Off-Performance Thin-Film Transistors.

Random networks of single-walled carbon nanotubes (SWCNTs) offer new-form-factor electronics such as transparent, flexible, and intrinsically stretchable devices. However, the long-standing trade-off between carrier mobility and on/off ratio due to the coexistence of metallic and semiconducting nanotubes has limited the performance of SWCNT-random-network-based thin-film transistors (SWCNT TFTs), hindering their practical circuit-level applications. Methods for high-purity separation between metallic and semiconducting nanotubes have been proposed, but they require high cost and energy and are vulnerable to contamination and nanotube shortening, leading to performance degradation.

Underwater maneuvering of robotic sheets through buoyancy-mediated active flutter.

Falling leaves flutter from side to side due to passive and intrinsic fluid-body coupling. Exploiting the dynamics of passive fluttering could lead to fresh perspectives for the locomotion and manipulation of thin, planar objects in fluid environments. Here, we show that the time-varying density distribution within a thin, planar body effectively elicits minimal momentum control to reorient the principal flutter axis and propel itself via directional fluttery motions.

High-performance compliant thermoelectric generators with magnetically self-assembled soft heat conductors for self-powered wearable electronics.

Softening of thermoelectric generators facilitates conformal contact with arbitrary-shaped heat sources, which offers an opportunity to realize self-powered wearable applications. However, existing wearable thermoelectric devices inevitably exhibit reduced thermoelectric conversion efficiency due to the parasitic heat loss in high-thermal-impedance polymer substrates and poor thermal contact arising from rigid interconnects. Here, we propose compliant thermoelectric generators with intrinsically stretchable interconnects and soft heat conductors that achieve high thermoelectric performance and unprecedented conformability simultaneously.

Ultraflexible and transparent electroluminescent skin for real-time and super-resolution imaging of pressure distribution.

The ability to image pressure distribution over complex three-dimensional surfaces would significantly augment the potential applications of electronic skin. However, existing methods show poor spatial and temporal fidelity due to their limited pixel density, low sensitivity, or low conformability. Here, we report an ultraflexible and transparent electroluminescent skin that autonomously displays super-resolution images of pressure distribution in real time.

Soft Modular Electronic Blocks (SMEBs): A Strategy for Tailored Wearable Health-Monitoring Systems.

Precise monitoring of human body signals can be achieved by soft, conformal contact and precise arrangement of wearable devices to the desired body positions. So far, no design and fabrication methodology in soft wearable devices is able to address the variations in the form factor of the human body such as the various sizes and shapes of individual body parts, which can significantly cause misalignments and the corresponding inaccurate monitoring. Here, a concept of soft modular electronic blocks (SMEBs) enabling the assembly of soft wearable systems onto human skin with functions and layouts tailored to the form factors of individuals' bodies is presented.

Electronic skins for soft, compact, reversible assembly of wirelessly activated fully soft robots.

Designing softness into robots holds great potential for augmenting robotic compliance in dynamic, unstructured environments. However, despite the body's softness, existing models mostly carry inherent hardness in their driving parts, such as pressure-regulating components and rigid circuit boards. This compliance gap can frequently interfere with the robot motion and makes soft robotic design dependent on rigid assembly of each robot component.

Printed cylindrical lens pair for application to the seam concealment in tiled displays.

Seamless tiling of displays is one of the key enabling technologies for the next-generation large-area electronics applications. In this paper, we propose a facile method to demonstrate a seamless display using cylindrical lens pair (CLP) fabricated by dispenser printing method. Optical properties of the printed CLP and corresponding capability of concealing seam in the display are analyzed by a set of luminance simulation and measurement in terms of geometric parameters of the lens.

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions.

Revisit to three-dimensional percolation theory: Accurate analysis for highly stretchable conductive composite materials.

A percolation theory based on variation of conductive filler fraction has been widely used to explain the behavior of conductive composite materials under both small and large deformation conditions. However, it typically fails in properly analyzing the materials under the large deformation since the assumption may not be valid in such a case. Therefore, we proposed a new three-dimensional percolation theory by considering three key factors: nonlinear elasticity, precisely measured strain-dependent Poisson's ratio, and strain-dependent percolation threshold.

F-number matching method in light field microscopy using an elastic micro lens array.

In light field microscopy (LFM), the F-number of the micro lens array (MLA) should be matched with the image-side F-number of the objective lens to utilize full resolution of an image sensor. We propose a new F-number matching method that can be applied to multiple objective lenses by using an elastic MLA. We fabricate an elastic MLA with polydimethylsiloxane (PDMS) using a micro contact printing method and address the strain for the F-number variation.