Characterization of fully-evaporated perovskite solar cells and photodetectors under high-intensity pulsed proton irradiation.

This study investigates the impact of proton irradiation on perovskite devices fabricated fully through vacuum deposition. Exposure to irradiation induces changes in both electrical and optical properties. The analysis reveals that the main factors influencing the observed performance changes in solar cells are a significant reduction in shunt resistance and a minor increase in series resistance, with minimal alterations in recombination dynamics.

Electron Irradiation-Induced Degradation of TiN Thin Films on Quartz and Sapphire Substrates.

In this contribution, we investigated the properties of magnetron-sputtered TiN thin films on sapphire and quartz substrates before and after 5 MeV electron irradiation with a fluence of 7 × 10 e/cm. Structural, morphological, optical, and electrical properties were analyzed to observe the impact of electron irradiation on the TiN thin films. The results showed improved electrical properties of the TiN thin films due to high-energy electron irradiation, resulting in increased specific conductivity compared to the as-deposited thin films on both sapphire and quartz substrates.

High-Performance Wearable Organic Photodetectors by Molecular Design and Green Solvent Processing for Pulse Oximetry and Photoplethysmography.

White-light detection from the visible to the near-infrared region is central to many applications such as high-speed cameras, autonomous vehicles, and wearable electronics. While organic photodetectors (OPDs) are being developed for such applications, several challenges must be overcome to produce scalable high-detectivity OPDs. This includes issues associated with low responsivity, narrow absorption range, and environmentally friendly device fabrication.

Interstellar photovoltaics.

The term 'Solar Cell' is commonly used for Photovoltaics that convert light into electrical energy. However, light can be harvested from various sources not limited to the Sun. This work considers the possibility of harvesting photons from different star types, including our closest neighbor star Proxima Centauri.

Effect of Electron and Proton Irradiation on Structural and Electronic Properties of Carbon Nanowalls.

In this work, a complex experimental study of the effect of electron and proton ionizing radiation on the properties of carbon nanowalls (CNWs) is carried out using various state-of-the-art materials characterization techniques. CNW layers on quartz substrates were exposed to 5 MeV electron and 1.8 MeV proton irradiation with accumulated fluences of 7 × 10 e/cm and 10 p/cm, respectively.

Unraveling Device Physics of Dilute-Donor Narrow-Bandgap Organic Solar Cells with Highly Transparent Active Layers.

The charge generation-recombination dynamics in three narrow-bandgap near-IR absorbing nonfullerene (NFA) based organic photovoltaic (OPV) systems with varied donor concentrations of 40%, 30%, and 20% are investigated. The dilution of the polymer donor with visible-range absorption leads to highly transparent active layers with blend average visible transmittance (AVT) values of 64%, 70%, and 77%, respectively. Opaque devices in the optimized highly reproducible device configuration comprising these transparent active layers lead to photoconversion efficiencies (PCEs) of 7.

Physical properties of carbon nanowalls synthesized by the ICP-PECVD method vs. the growth time.

Investigation of the physical properties of carbon nanowall (CNW) films is carried out in correlation with the growth time. The structural, electronic, optical and electrical properties of CNW films are investigated using electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, UV-Vis spectroscopy, Hall Effect measurement system, Four Point Probing system, and thermoelectric measurements. Shorter growth time results in thinner CNW films with a densely spaced labyrinth structure, while a longer growth time results in thicker CNW films with a petal structure.

CdTe X/γ-ray Detectors with Different Contact Materials.

Different contact materials and optimization of techniques of their depositions expand the possibilities to obtain high performance room temperature CdTe-based X/γ-ray detectors. The heterostructures with ohmic (MoO) and Schottky (MoO, TiO, TiN, and In) contacts, created by DC reactive magnetron sputtering and vacuum thermal evaporation, as well as In/CdTe/Au diodes with a junction, formed by laser-induced doping, have been developed and investigated. Depending on the surface pre-treatment of semi-insulating -CdTe crystals, the deposition of a MoO film formed either ohmic or Schottky contacts.

Coupling between structural properties and charge transport in nano-crystalline and amorphous graphitic carbon films, deposited by electron-beam evaporation.

Nano-crystalline and amorphous films of graphitized carbon were deposited by electron-beam evaporation of bulk graphite. Structural properties and the size of graphite nanoclusters (L ≈ 1.2-5 nm) in the films were determined from the analysis of their Raman spectra.

Visualization of Charge Transfer from Bacteria to a Self-Doped Conjugated Polymer Electrode Surface Using Conductive Atomic Force Microscopy.

In this work, we aim to provide a better understanding of the reasons behind electron transfer inefficiencies between electrogenic bacteria and the electrode in microbial fuel cells. We do so using a self-doped conjugated polyelectrolyte (CPE) as the electrode surface, onto which is placed, then using conductive atomic force microscopy (C-AFM) to directly visualize and quantify the electrons that are transferring from each bacterium to the electrode, thereby helping us gain a better understanding for the overpotential losses in MFCs. In doing so, we obtain images that show can directly transfer electrons to an electrode surface without the use of pili, and that overpotential losses are likely due to cell death and poor distribution or performance of individual bacterium's OmcB cytochromes.

Organic Electrochemical Transistors Based on the Conjugated Polyelectrolyte PCPDTBT-SO K (CPE-K).

PCPDTBT-SO K (CPE-K), a conjugated polyelectrolyte, is presented as a mixed conductor material that can be used to fabricate high transconductance accumulation mode organic electrochemical transistors (OECTs). OECTs are utilized in a wide range of applications such as analyte detection, neural interfacing, impedance sensing, and neuromorphic computing. The use of interdigitated contacts to enable high transconductance in a relatively small device area in comparison to standard contacts is demonstrated.

A High-Performance Solution-Processed Organic Photodetector for Near-Infrared Sensing.

Sensitive detection of near-infrared (NIR) light enables many important applications in both research and industry. Current organic photodetectors suffer from low NIR sensitivity typically due to early absorption cutoff, low responsivity, and/or large dark/noise current under bias. Herein, organic photodetectors based on a novel ultranarrow-bandgap nonfullerene acceptor, CO1-4Cl, are presented, showcasing a remarkable responsivity over 0.

Towards understanding the doping mechanism of organic semiconductors by Lewis acids.

Precise doping of organic semiconductors allows control over the conductivity of these materials, an essential parameter in electronic applications. Although Lewis acids have recently shown promise as dopants for solution-processed polymers, their doping mechanism is not yet fully understood. In this study, we found that B(CF) is a superior dopant to the other Lewis acids investigated (BF, BBr and AlCl).

Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance.

Recent research efforts on solution-processed semitransparent organic solar cells (OSCs) are presented. Essential properties of organic donor:acceptor bulk heterojunction blends and electrode materials, required for the combination of simultaneous high power conversion efficiency (PCE) and average visible transmittance of photovoltaic devices, are presented from the materials science and device engineering points of view. Aspects of optical perception, charge generation-recombination, and extraction processes relevant for semitransparent OSCs are also discussed in detail.

Graphene/semi-insulating single crystal CdTe Schottky-type heterojunction X- and γ-Ray Radiation Detectors.

We developed a new concept of X- and γ-ray radiation semiconductor detectors based on a large area graphene/semi-insulating single crystal CdTe Schottky-type heterojunction. These two terminal electronic devices can be easily fabricated by forming a Van der Waals contact between large area chemical vapor deposited graphene and CdTe substrates in air and at room temperature. This approach significantly reduces the fabrication cost and improves the reproducibility and stability of electrical properties.

n-Type Ionic-Organic Electronic Ratchets for Energy Harvesting.

Ionic-organic ratchets are three-terminal electronic devices with asymmetric conductivity of the active layer.  These devices  are capable of generating useful direct current electrical power by converting electromagnetic noise signals available in any environment. In this work, we demonstrate for the first time an n-type ionic-organic ratchet which can generate a current of up to 7.

Solution-Processed Ion-Free Organic Ratchets with Asymmetric Contacts.

Ion-free organic ratchets with asymmetric injecting contacts (AICs) are fabricated using solution-processable organic semiconductors. Scanning Kelvin probe microscopy analysis reveals that the rectifying function is achieved via the "charge pump" mechanism. Electrical characterizations show that the device can readily operate under industrial standard radio frequency and its high-frequency performance may be enhanced through further material/device engineering.

Fine Art of Thermoelectricity.

A detailed study of hitherto unknown electrical and thermoelectric properties of graphite pencil traces on paper was carried out by measuring the Hall and Seebeck effects. We show that the combination of pencil-drawn graphite and brush-painted poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) films on regular office paper results in extremely simple, low-cost, and environmentally friendly thermoelectric power generators with promising output characteristics at low-temperature gradients. The working characteristics can be improved even further by incorporating n-type InSe flakes.

Influence of Radiation on the Properties and the Stability of Hybrid Perovskites.

Organic-inorganic perovskites are well suited for optoelectronic applications. In particular, perovskite single and perovskite tandem solar cells with silicon are close to their market entry. Despite their swift rise in efficiency to more than 21%, solar cell lifetimes are way below the needed 25 years.

Understanding the Device Physics in Polymer-Based Ionic-Organic Ratchets.

High-performance solution-processed ionic-organic ratchets are fabricated using polymer semiconductors. The devices can provide both high short-circuit current and open-circuit voltage at room temperature, and be driven by AC signals with frequencies up to 13.56 MHz.

Radiation Hardness and Self-Healing of Perovskite Solar Cells.

The radiation hardness of CH NH PbI -based solar cells is evaluated from in situ measurements during high-energy proton irradiation. These organic-inorganic perovskites exhibit radiation hardness and withstand proton doses that exceed the damage threshold of crystalline silicon by almost 3 orders of magnitude. Moreover, after termination of the proton irradiation, a self-healing process of the solar cells commences.

Raman spectroscopy of Cu-Sn-S ternary compound thin films prepared by the low-cost spray-pyrolysis technique.

Cu-Sn-S (CTS) thin films were deposited onto bare and molybdenum (Mo) coated glass substrates by means of the spray pyrolysis technique under different conditions. The CTS thin films obtained are shown, by means of Raman spectroscopy, to consist of two main phases: CuSnS and CuSnS as well as of the secondary phase of CuS. The electrical conductivity of the spray-deposited p-type CTS thin films under investigation is determined by two shallow acceptor levels: Ev+0.

2D nanocomposite photoconductive sensors fully dry drawn on regular paper.

We proposed a new type of low-cost and environmentally friendly photoconductive sensor, based on GaSe/graphite nanocomposite fully dry drawn on paper. The proposed fully-drawn nanocomposite sensors successfully utilize the unique combination of structural and electrical properties of a layered semiconductor and graphite. In spite of the relatively pure photosensitivity of the proposed photodetectors, we believe that this work is the first step for the further development and enhancement of extremely simple and low-cost paper-based dry drawn layered semiconductor/graphite nanocomposite sensors.