Hydrogen-Bond-Assisted Diels-Alder Kinetics or Self-Healing in Reversible Polymer Networks? A Combined Experimental and Theoretical Study.

Diels-Alder (DA) cycloadditions in reversible polymer networks are important for designing sustainable materials with self-healing properties. In this study, the DA kinetics of hydroxyl-substituted bis- and tetrafunctional furans with bis- and tris-functional maleimides, both containing ether-functionalized spacers, is investigated by modelling two equilibria representing the and cycloadduct formation. Concretely, the potential catalysis of the DA reaction through hydrogen bonding between hydroxyl of the furans and carbonyl of the maleimides or ether of the spacers is experimentally and theoretically scrutinized.

Self-Healing in Mobility-Restricted Conditions Maintaining Mechanical Robustness: Furan-Maleimide Diels-Alder Cycloadditions in Polymer Networks for Ambient Applications.

Two reversible polymer networks, based on Diels-Alder cycloadditions, are selected to discuss the opportunities of mobility-controlled self-healing in ambient conditions for which information is lacking in literature. The main methods for this study are (modulated temperature) differential scanning calorimetry, microcalorimetry, dynamic rheometry, dynamic mechanical analysis, and kinetic simulations. The reversible network 3M-3F630 is chosen to study the conceptual aspects of diffusion-controlled Diels-Alder reactions from 20 to 65 °C.

In Vivo Imaging of the Stability and Sustained Cargo Release of an Injectable Amphipathic Peptide-Based Hydrogel.

Hydrogels are promising materials for biomedical applications such as tissue engineering and controlled drug release. In the past two decades, the peptide hydrogel subclass has attracted an increasing level of interest from the scientific community because of its numerous advantages, such as biocompatibility, biodegradability, and, most importantly, injectability. Here, we report on a hydrogel consisting of the amphipathic hexapeptide H-FEFQFK-NH, which has previously shown promising in vivo properties in terms of releasing morphine.

Extremely robust and post-functionalizable gold nanoparticles coated with calix[4]arenes via metal-carbon bonds.

Gold nanoparticles stabilized with a thin layer of post-functionalizable calix[4]arenes were prepared through the reductive grafting of a calix[4]arene-tetra-diazonium salt. These particles show exceptional stability towards extreme pH, F(-), NaCl, and upon drying. Post-functionalization of the calix-layer was demonstrated, opening the way to a wide range of applications.

X-Ray Nanoscopy of a Bulk Heterojunction.

Optimizing the morphology of bulk heterojunctions is known to significantly improve the photovoltaic performance of organic solar cells, but available quantitative imaging techniques are few and have severe limitations. We demonstrate X-ray ptychographic coherent diffractive imaging applied to all-organic blends. Specifically, the phase-separated morphology in bulk heterojunction photoactive layers for organic solar cells, prepared from a 50:50 blend of poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) and thermally treated for different annealing times is imaged to high resolution.

The Influence of Conjugated Polymer Side Chain Manipulation on the Efficiency and Stability of Polymer Solar Cells.

The stability of polymer solar cells (PSCs) can be influenced by the introduction of particular moieties on the conjugated polymer side chains. In this study, two series of donor-acceptor copolymers, based on bis(thienyl)dialkoxybenzene donor and benzo[][1,2,5]thiadiazole (BT) or thiazolo[5,4-]thiazole (TzTz) acceptor units, were selected toward effective device scalability by roll-coating. The influence of the partial exchange (5% or 10%) of the solubilizing 2-hexyldecyloxy by alternative 2-phenylethoxy groups on efficiency and stability was investigated.

High-Permittivity Conjugated Polyelectrolyte Interlayers for High-Performance Bulk Heterojunction Organic Solar Cells.

Conjugated polyelectrolyte (CPE) interfacial layers present a powerful way to boost the I-V characteristics of organic photovoltaics. Nevertheless, clear guidelines with respect to the structure of high-performance interlayers are still lacking. In this work, impedance spectroscopy is applied to probe the dielectric permittivity of a series of polythiophene-based CPEs.

Mixed α/β-Peptides as a Class of Short Amphipathic Peptide Hydrogelators with Enhanced Proteolytic Stability.

Peptide hydrogels are a highly promising class of materials for biomedical application, albeit facing many challenges with regard to stability and tunability. Here, we report a new class of amphipathic peptide hydrogelators, namely mixed α/β-peptide hydrogelators. These mixed α/β-gelators possess good rheological properties (high storage moduli) and form transparent self-supporting gels with shear-thinning behavior.

Rational design of a hexapeptide hydrogelator for controlled-release drug delivery.

The amphiphilic peptide sequence H-Phe-Glu-Phe-Gln-Phe-Lys-OH (MBG-1) is developed as a novel hydrogelator for use in controlled-drug release administration, which is the smallest tunable ionic self-complementary hydrogelating peptide reported to date making it attractive for larger scale preparation. Hydrogelation is demonstrated to result from self-assembly of the peptide into beta-sheet nanofibers that are physically cross-linked by intertwining as well as larger bundle formation. Finally, the release of two small molecule cargos, fluorescein sodium and ciprofloxacin hydrochloride, is demonstrated revealing a two-stage zero-order sustained release profile up to 80% cumulative release over eight days.

Phase behavior of PCBM blends with different conjugated polymers.

In this work the phase behavior of [6,6]-phenyl C(61)-butyric acid methyl ester (PCBM) blends with different poly(phenylene vinylene) (PPV) samples is investigated by means of standard and modulated temperature differential scanning calorimetry (DSC and MTDSC) and rapid heat-cool calorimetry (RHC). The PPV conjugated polymers include poly(2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene vinylene) (MDMO-PPV), High T(g)-PPV which is a copolymer, and poly((2-methoxy-5-phenethoxy)-1,4-phenylene vinylene) (MPE-PPV). Comparisons of these PPV:PCBM blends with regioregular poly(3-hexyl thiophene) (P3HT):PCBM blends are made to see the different component miscibilities among different blends.

Dynamics of the crystal to plastic crystal transition in the hydrogen bonded N-isopropylpropionamide.

N-Isopropylpropionamide (NiPPA), which can self-associate via hydrogen bonds, was found to undergo a solid-solid transition as identified by DSC and X-ray diffraction. Below the melting temperature of 51 °C NIPPA adopts a plastic crystalline state with a tetragonal unit cell until it transforms into an ordered crystal with a monoclinic structure at temperatures ≤10 °C. Dielectric spectroscopy was used to characterize the dynamics of the system, determining the activation parameters for the plastic to crystalline phase transition.

Theoretical analysis of carbon nanotube wetting in polystyrene nanocomposites.

Besides chemical functionalisation, the use of surfactants can be applied to debundle and disperse carbon nanotubes before further application in polymer nanocomposites. In this work we present a theoretical analysis of the interaction between single-walled carbon nanotubes and sodium dodecyl sulfate as surfactant and/or polystyrene as polymer matrix using semi-empirical AM1 calculations. Results indicate that the use of short potassium sulfate-terminated polystyrene chains as an extra component can help to remove the surfactant from the nanotube surface within the matrix, resulting in improved electronic properties of the nanocomposite.

Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology.

In this work, the phase diagram of poly(3-hexyl thiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM) blends is measured by means of standard and modulated temperature differential scanning calorimetry. Blends were made by solvent-casting from chlorobenzene, as blends cast from toluene or 1,2-dichlorobenzene prove to retain effects of phase segregation during casting, hindering the determination of the phase diagram. The film morphology of P3HT/PCBM blends cast from chlorobenzene results from a dual crystallization behavior, in which the crystallization of each component is hindered by the other component.

Phase behavior in blends of ethylene oxide-propylene oxide copolymer and poly(ether sulfone) studied by modulated-temperature DSC and NMR relaxometry.

The state diagram of a blend consisting of a copolymer containing ethylene oxide and propylene oxide, P(EO-ran-PO), and poly(ether sulfone), PES, is constructed by using modulated-temperature differential scanning calorimetry (MTDSC), T(2) NMR relaxometry, and light scattering. The apparent heat capacity signal in MTDSC is used for the characterization of polymer miscibility and morphology development. T(2) NMR relaxometry is used to detect the onset of phase separation, which is in good agreement with the onset of phase separation in the apparent heat capacity from MTDSC and the cloud-point temperature as determined from light scattering.

Microscopic morphology of chlorinated polyethylene-based nanocomposites synthesized from poly(epsilon-caprolactone)/clay masterbatches.

Chlorinated polyethylene (CPE) nanocomposites were synthesized by melt blending clay-rich/poly(epsilon-caprolactone) (PCL) masterbatches to CPE matrices. The masterbatches were prepared following two synthetic routes: either PCL is melt-blended to the clay or it is grafted to the clay platelets by in situ polymerization. The microscopic morphology of the nanocomposites was characterized by X-ray diffraction, atomic force microscopy, transmission electron microscopy, and modulated temperature differential scanning calorimetry.

Phase transformations in aqueous low molar mass poly(vinyl methyl ether) solutions: theoretical prediction and experimental validation of the peculiar solvent melting line, bimodal LCST, and (adjacent) UCST miscibility gaps.

Supported by theoretical predictions based on the Wertheim Lattice Thermodynamic Perturbation Theory, modulated temperature differential scanning calorimetry (MTDSC) was used to further the knowledge of the phase behavior of aqueous poly(vinyl methyl ether) (PVME) solutions. Using a narrowly dispersed low molar mass PVME, we determined the following phase boundaries: (i) a bimodal lower critical solution temperature (LCST) miscibility gap at physiological temperature (around 37 degrees C), (ii) an upper critical solution temperature (UCST) two-phase area at sub-zero temperatures and high polymer concentration, and (iii) the melting line of the solvent across the entire concentration range, showing a peculiar stepwise decrease with composition. The location of the glass transition region and its influence on the crystallization/melting behavior of the solvent is discussed.