Silver-Catalyzed Aqueous Electrochemical Valorization of Soda Lignin into Aliphatics and Phenolics.

Transitioning from crude oil to renewable sources of carbon-based chemicals is critical for advancing sustainable development. Lignin, a wood-derived biomacromolecule, holds great potential as a renewable feedstock, but efficient depolymerization and dearomatization methods are required to fully unlock its potential. In this investigation, we present a silver-catalyzed aqueous electrocatalytic method for the selective depolymerization and partial dearomatization of soda lignin under mild, ambient conditions.

Organic Chemicals from Wood: Selective Depolymerization and Dearomatization of Lignin via Aqueous Electrocatalysis.

Replacing crude oil as the primary industrial source of carbon-based chemicals has become crucial for both environmental and resource sustainability reasons. In this scenario, wood arises as an excellent candidate, whilst depolymerization approaches have emerged as promising strategies to unlock the lignin potential as a resource in the production of high-value organic chemicals. However, many drawbacks, such as toxic solvents, expensive catalysts, high energy inputs, and poor product selectivity have represented major challenges to this task.

Cellulose acylation in homogeneous and heterogeneous media: Optimization of reactions conditions.

The dependence of the DS on the acid anhydride/anhydroglucose unit ((RCO)O/AGU) molar ratio was correlated using second-order polynomials. The regression coefficients of the (RCO)O/AGU terms showed that increasing the length of the RCO group of the anhydride led to lower values of DS. For acylation under heterogeneous reaction conditions, the following were employed: acid anhydrides and butyryl chloride as acylating agents; iodine as a catalyst; N,N-dimethylformamide (DMF) as a solvent, pyridine, and triethylamine as solvents and catalysts.

MoS nanoflower-decorated lignin nanoparticles for superior lubricant properties.

Lignin has been, for a long time, treated as a low-value waste product. To change this scenario, high-value applications have been recently pursued, , the preparation of hybrid materials with inorganic components. Although hybrid inorganic-based materials can benefit from the reactive lignin phenolic groups at the interface, often responsible for optimizing specific properties, this is still an underexplored field.

Electrochemical Depolymerization of Lignin in a Biomass-based Solvent.

Invited for this month's cover is the group of Adam Slabon at the University of Wuppertal. The image illustrates the reductive depolymerization of lignin into monomers using copper as electrocatalyst. The Research Article itself is available at 10.

Electrochemical Depolymerization of Lignin in a Biomass-based Solvent.

Breaking down lignin into smaller units is the key to generate high value-added products. Nevertheless, dissolving this complex plant polyphenol in an environment-friendly way is often a challenge. Levulinic acid, which is formed during the hydrothermal processing of lignocellulosic biomass, has been shown to efficiently dissolve lignin.

Curcuminoid-Tailored Interfacial Free Energy of Hydrophobic Fibers for Enhanced Biological Properties.

The ability of mimicking the extracellular matrix architecture has gained electrospun scaffolds a prominent space into the tissue engineering field. The high surface-to-volume aspect ratio of nanofibers increases their bioactivity while enhancing the bonding strength with the host tissue. Over the years, numerous polyesters, such as poly(lactic acid) (PLA), have been consolidated as excellent matrices for biomedical applications.

The role of nanohydroxyapatite on the morphological, physical, and biological properties of chitosan nanofibers.

Objectives: This study aimed to evaluate the effects of nanohydroxyapatite (nHAp) particles on the morphological, chemical, physical, and biological properties of chitosan electrospun nanofibers.

Materials And Methods: nHAp particles with a 1.67 Ca/P ratio were synthesized via the aqueous precipitation method, incorporated into chitosan polymer solution (0.

A novel decellularization method to produce brain scaffolds.

Scaffolds composed of extracellular matrix (ECM) can assist tissue remodeling and repair following injury. The ECM is a complex biomaterial composed of proteins, glycoproteins, proteoglycans, and glycosaminoglycans, secreted by cells. The ECM contains fundamental biological cues that modulate cell behavior and serves as a structural scaffold for cell adhesion and growth.

Cell Viability of Porous Poly(d,l-lactic acid)/Vertically Aligned Carbon Nanotubes/Nanohydroxyapatite Scaffolds for Osteochondral Tissue Engineering.

Treatment of articular cartilage lesions remains an important challenge. Frequently the bone located below the cartilage is also damaged, resulting in defects known as osteochondral lesions. Tissue engineering has emerged as a potential approach to treat cartilage and osteochondral defects.

Polypyrrole increases branching and neurite extension by Neuro2A cells on PBAT ultrathin fibers.

We present a methodology for production and application of electrospun hybrid materials containing commercial polyester (poly (butylene adipate-co-terephthalate; PBAT), and a conductive polymer (polypyrrole; PPy) as scaffold for neuronal growth and differentiation. The physical-chemical properties of the scaffolds and optimization of the electrospinning parameters are presented. The electrospun scaffolds are biocompatible and allow proper adhesion and spread of mesenchymal stem cells (MSCs).

Nanohydroxyapatite/Graphene Nanoribbons Nanocomposites Induce in Vitro Osteogenesis and Promote in Vivo Bone Neoformation.

Nanomaterials based on graphene oxide nanoribbons (GNR) and nanohydroxyapatite (nHAp) serve as attractive materials for bone tissue engineering. Herein, we evaluated the potential of nHAp/GNR toward in vitro analysis of specific genes related to osteogenesis and in vivo bone regeneration using animal model. Three different concentrations of nHAp/GNR composites were analyzed in vitro using a cytotoxicity assay, and osteogenic potential was determined by , , , , and genes and alkaline phosphatase assays.

Electrospun ultrathin PBAT/nHAp fibers influenced the in vitro and in vivo osteogenesis and improved the mechanical properties of neoformed bone.

Combining polyester scaffolds with synthetic nanohydroxyapatite (nHAp), which is bioactive and osteoconductive, is a plausible strategy to improve bone regeneration. Here, we propose the combination of PBAT [poly(butylene-adipate-co-terephthalate)] and synthetic nHAp (at 3 and 5wt%). PBAT is a relatively a new polymer with low crystallinity and attractive biodegradability and mechanical properties for orthopedic applications, however, with a still underexplored potential for in vivo applications.

PDLLA honeycomb-like scaffolds with a high loading of superhydrophilic graphene/multi-walled carbon nanotubes promote osteoblast in vitro functions and guided in vivo bone regeneration.

Herein, we developed honeycomb-like scaffolds by combining poly (d, l-lactic acid) (PDLLA) with a high amount of graphene/multi-walled carbon nanotube oxides (MWCNTO-GO, 50% w/w). From pristine multi-walled carbon nanotubes (MWCNT) powders, we produced MWCNTO-GO via oxygen plasma etching (OPE), which promoted their exfoliation and oxidation. Initially, we evaluated PDLLA and PDLLA/MWCNTO-GO scaffolds for tensile strength tests, cell adhesion and cell viability (with osteoblast-like MG-63 cells), alkaline phosphatase (ALP, a marker of osteoblast differentiation) activity and mineralized nodule formation.

Magnetic super-hydrophilic carbon nanotubes/graphene oxide composite as nanocarriers of mesenchymal stem cells: Insights into the time and dose dependences.

Among nanostructured materials, multi-walled carbon nanotubes (MWCNT) have demonstrated great potential for biomedical applications in recent years. After oxygen plasma etching, we can obtain super-hydrophilic MWCNT that contain graphene oxide (GO) at their tips. This material exhibits good dispersion in biological systems due to the presence of polar groups and its excellent magnetic properties due to metal particle residues from the catalyst that often remain trapped in its walls and tips.

Influence of low contents of superhydrophilic MWCNT on the properties and cell viability of electrospun poly (butylene adipate-co-terephthalate) fibers.

The use of poly (butylene adipate-co-terephthalate) (PBAT) in tissue engineering, more specifically in bone regeneration, has been underexplored to date due to its poor mechanical resistance. In order to overcome this drawback, this investigation presents an approach into the preparation of electrospun nanocomposite fibers from PBAT and low contents of superhydrophilic multi-walled carbon nanotubes (sMWCNT) (0.1-0.

Bio-based Films from Linter Cellulose and Its Acetates: Formation and Properties.

This paper describes the results obtained on the preparation of films composed of linter cellulose and the corresponding acetates. The acetylation was carried out in the LiCl/DMAc solvent system. Films were prepared from a LiCl/DMAc solution of cellulose acetates (degree of substitution, DS 0.