Evaluation of the X-ray/EUV Nanolithography Facility at AS through wavefront propagation simulations.

Synchrotron light sources can provide the required spatial coherence, stability and control to support the development of advanced lithography at the extreme ultraviolet and soft X-ray wavelengths that are relevant to current and future fabricating technologies. Here an evaluation of the optical performance of the soft X-ray (SXR) beamline of the Australian Synchrotron (AS) and its suitability for developing interference lithography using radiation in the 91.8 eV (13.

A Simplified Method for Patterning Graphene on Dielectric Layers.

The large-scale formation of patterned, quasi-freestanding graphene structures supported on a dielectric has so far been limited by the need to transfer the graphene onto a suitable substrate and contamination from the associated processing steps. We report μm scale, few-layer graphene structures formed at moderate temperatures (600-700 °C) and supported directly on an interfacial dielectric formed by oxidizing Si layers at the graphene/substrate interface. We show that the thickness of this underlying dielectric support can be tailored further by an additional Si intercalation of the graphene prior to oxidation.

Mechanistic implications of Li-S cell function through modification of organo-sulfur cathode architectures.

Copolymeric organo-sulfur based electrodes provide a unique framework to explore and subsequently improve lithium-sulfur (Li-S) cells. There is a general difference in the way copolymers trap lithium during cell function compared to inorganic carbon-sulfur composites. Using a chain-like polyterpene copolymeric architecture involving the copolymerization of squalene monomer with sulfur (poly(S-r-squalene)), the first evidence for distinguishable differences in the entrapment of lithiated species, when using different copolymeric architectures, is provided.

Effect of Long- and Short-Range Disorder on the Oxygen Ionic Conductivity of Tm(TiTm)O "Stuffed" Pyrochlores.

The long-range average and short-range local structures in the Tm(TiTm)O ( = 0.00-0.67) series were studied using a combination of diffraction and spectroscopic techniques.

Outstanding Thermal Conductivity of Single Atomic Layer Isotope-Modified Boron Nitride.

Materials with high thermal conductivities (κ) are valuable to solve the challenge of waste heat dissipation in highly integrated and miniaturized modern devices. Herein, we report the first synthesis of atomically thin isotopically pure hexagonal boron nitride (BN) and its one of the highest κ among all semiconductors and electric insulators. Single atomic layer (1L) BN enriched with ^{11}B has a κ up to 1009  W/mK at room temperature.

Ablation in Externally Applied Electric and Magnetic Fields.

To harness light-matter interactions at the nano-/micro-scale, better tools for control must be developed. Here, it is shown that by applying an external electric and/or magnetic field, ablation of Si and glass under ultra-short (sub-1 ps) laser pulse irradiation can be controlled via the Lorentz force F = e E + e [ v × B ] , where v is velocity of charge , E is the applied electrical bias and B is the magnetic flux density. The external electric E-field was applied during laser ablation using suspended micro-electrodes above a glass substrate with an air gap for the incident laser beam.

External Field-Controlled Ablation: Magnetic Field.

The femtosecond laser ablation of silicon amidst an externally applied magnetic field in different orientations was investigated with respect to the scanning direction and polarisation of the laser beam, by observation of ablation patterns and debris displacement in a range of fluences, magnetic fields strengths, and geometries. Ultra-short ∼ 230 fs laser pulses of 1030 nm wavelengths were utilised in the single and multi-pulse irradiation modes. Ablation with an externally applied magnetic B-field B e x t ≈ 0.

Elucidation of structures and lithium environments for an organo-sulfur cathode.

Composite organo-sulfur cathodes provide a unique platform for the realization of lithium-sulfur (Li-S) cells. However, difficulties arise in the interpretation of the function of these electrodes in Li-S cells and the role they play in suppressing the so-called 'shuttle effect'. This work focuses on monitoring in detail the structural evolution and lithium environments during charge-discharge cycles in a lithium half-cell of an organo-sulfur cathode, which was synthesised by inverse vulcanisation with 1,3-diisopropenylbenzene.

Quick AS NEXAFS Tool (QANT): a program for NEXAFS loading and analysis developed at the Australian Synchrotron.

An analysis program for near-edge X-ray absorption fine-structure (NEXAFS) spectra has been developed and implemented at the soft X-ray beamline of the Australian Synchrotron. The program allows for instant viewing of corrected data channels including normalizations to a standard, double normalizations when the standard itself has an undesired spectral response, and background subtraction. The program performs simple compositional analysis and peak fitting and includes rapid common calculations such as the average tilt angle of molecules with respect to the surface, and the determination of the complex index of refraction, which previously required intensive manual analysis.

Black-CuO: surface-enhanced Raman scattering and infrared properties.

Large surface area samples of nanotextured black CuO were prepared by chemical etching of Cu for use in surface-enhanced Raman scattering (SERS). The SERS intensity of a self-assembled monolayer (SAM) of thiophenol was proportional to the thickness of a nanoscale-conformal Au film deposited by magnetron sputtering over the black CuO. A very high SERS yield of ∼10(4) counts per s per mW was observed for the thiophenol SAM on the thickest Au films studied here.

An unconventional method for measuring the Tc L3-edge of technetium compounds.

Tc L3-edge XANES spectra have been collected on powder samples of SrTcO3 (octahedral Tc(4+)) and NH4TcO4 (tetrahedral Tc(7+)) immobilized in an epoxy resin. Features in the Tc L3-edge XANES spectra are compared with the pre-edge feature of the Tc K-edge as well as other 4d transition metal L3-edges. Evidence of crystal field splitting is obvious in the Tc L3-edge, which is sensitive to the coordination number and oxidation state of the Tc cation.

Determining the electronic confinement of a subsurface metallic state.

Dopant profiles in semiconductors are important for understanding nanoscale electronics. Highly conductive and extremely confined phosphorus doping profiles in silicon, known as Si:P δ-layers, are of particular interest for quantum computer applications, yet a quantitative measure of their electronic profile has been lacking. Using resonantly enhanced photoemission spectroscopy, we reveal the real-space breadth of the Si:P δ-layer occupied states and gain a rare view into the nature of the confined orbitals.

Observation of active sites for oxygen reduction reaction on nitrogen-doped multilayer graphene.

Active sites and the catalytic mechanism of nitrogen-doped graphene in an oxygen reduction reaction (ORR) have been extensively studied but are still inconclusive, partly due to the lack of an experimental method that can detect the active sites. It is proposed in this report that the active sites on nitrogen-doped graphene can be determined via the examination of its chemical composition change before and after ORR. Synchrotron-based X-ray photoelectron spectroscopy analyses of three nitrogen-doped multilayer graphene samples reveal that oxygen reduction intermediate OH(ads), which should chemically attach to the active sites, remains on the carbon atoms neighboring pyridinic nitrogen after ORR.

Key role of bismuth in the magnetoelastic transitions of Ba3BiIr2O9 and Ba3BiRu2O9 as revealed by chemical doping.

The key role played by bismuth in an average intermediate oxidation state in the magnetoelastic spin-gap compounds Ba3BiRu2O9 and Ba3BiIr2O9 has been confirmed by systematically replacing bismuth with La(3+) and Ce(4+). Through a combination of powder diffraction (neutron and synchrotron), X-ray absorption spectroscopy, and magnetic properties measurements, we show that Ru/Ir cations in Ba3BiRu2O9 and Ba3BiIr2O9 have oxidation states between +4 and +4.5, suggesting that Bi cations exist in an unusual average oxidation state intermediate between the conventional +3 and +5 states (which is confirmed by the Bi L3-edge spectrum of Ba3BiRu2O9).

Influence of cationic surfactants on the formation and surface oxidation states of gold nanoparticles produced via laser ablation.

We report on the time evolution of gold nanoparticles produced by laser ablation in the presence of the cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC) in aqueous solution. The broader applicability of a laser-induced nanoparticle formation kinetic model previously developed by us for the case of anionic surfactants in aqueous solution [ J. Phys.

Investigating the order-disorder phase transition in Nd2-xYxZr2O7via diffraction and spectroscopy.

The pyrochlore-defect fluorite phase transition in the mixed-metal zirconate Nd2-xYxZr2O7 (0 ≤ x ≤ 2) solid solution was investigated using synchrotron X-ray and neutron diffraction, as well as X-ray absorption spectroscopy. Diffraction analysis revealed a two-phase region between 1.0 ≤ x ≤ 1.

The influence of surface structure on H4SiO4 oligomerization on rutile and amorphous TiO2 surfaces: an ATR-IR and synchrotron XPS study.

Silicic acid (H(4)SiO(4)) is ubiquitous in natural aquatic systems. Applications of TiO(2) in these systems will be influenced by H(4)SiO(4) sorption and oligomerization reactions on the TiO(2) surface, and this can affect many aspects of TiO(2) reactivity. The spatial arrangement of sorption sites on a metal oxide surface can promote specific lateral interactions, such as oligomerization, between sorbed species.

Photoreduction kinetics of sodium tetrachloroaurate under synchrotron soft X-ray exposure.

We report on the time evolution of the sodium tetrachloroaurate (NaAuCl(4)) chemical properties as a function of soft X-ray exposure in a dried sample on a silicon surface using X-ray photoelectron spectroscopy (XPS). Our investigations provide mechanistic insight into the photoreduction kinetics from Au(III) to Au(I) and then Au(I) to Au(0). We unambiguously show that XPS photoreduction occurs in stepwise fashion via the Au(I) state.

New insights into the substrate-plasma polymer interface.

We describe a new method to characterize the underside (substrate interface) of plasma polymer (PP) thin films via their simple delamination from a sodium chloride single crystal substrate. By depositing the PP film onto an ionic bonded surface such as a sodium chloride crystal, the PP films investigated were easily delaminated from the substrate. Two plasma polymer films deposited from 1-bromopropane (BrPP) and allylamine (AAPP) were used to exemplify this new technique.

Chemically resolved structure of the surface.

The structure and chemical states of the Sn/Ge(111) surface are characterized by x-ray standing waves combined with photoemission. For the room temperature square root 3xsquare root 3 phase two chemical components, approximately 0.4 eV apart, are observed for both Sn 3d and 4d core levels.