Validation of a smartphone-compatible MIP-based sensor for bisphenol A determination in wastewater samples.

A handheld smartphone-compatible molecularly imprinted polymer (MIP)-based sensor was developed for the analysis of bisphenol A (BPA) in wastewater samples. Sensing elements based on ethylene glycol methacrylate phosphate (EGMP)-containing MIP films were designed and optimized using molecular dynamics simulations. The highly porous MIP films were synthesized via in situ polymerization, employing a fragment-based approach.

Physicochemical properties and compatibility of sodium alginate and fucoidan solutions.

The interaction between linear sodium alginate and branched fucoidan were investigated using viscosity and tensiometric measurements. It was shown that water-soluble interpolymer complex is formed. The alginate-fucoidan complexation is due to the formation of a cooperative system of hydrogen bonds between the ionogenic and hidroxyl groups of sodium alginate and fucoidan and hydrophobic interactions.

An enhanced fluorescent sensor system based on molecularly imprinted polymer chips with silver nanoparticles for highly-sensitive zearalenone analysis.

A novel enhanced fluorescent sensor system for zearalenone (ZON) determination in flour samples is presented. The ZON-selective molecularly imprinted polymer (MIP) films were developed with a computational modelling method and synthesised with cyclododecyl-2,4-dihydroxybenzoate as a "dummy" template and ethylene glycol methacrylate phosphate as a functional monomer acted as the selective recognition elements for ZON fluorescence detection. Spherical silver nanoparticles (AgNPs) were embedded in the MIP films' structure to enhance the sensor sensitivity.

Highly-selective and sensitive plasmon-enhanced fluorescence sensor of aflatoxins.

We demonstrate a novel sensor platform with enhanced sensitivity and selectivity for detecting aflatoxin B1 - a common food toxin in cereals. The approach is based on a molecularly imprinted polymer film that provides selective binding of the aflatoxin B1 and fluorescence signal from the analyte molecule enhanced by the local electric field induced in close proximity to the surface of a silver nanoparticle excited at the localized surface plasmon resonance (LSPR) wavelength. Molecularly imprinted polymers (MIPs) with supramolecular aflatoxin-selective receptor sites and embedded spherical silver nanoparticles (with diameters 30-70 nm, the LSPR band 407 nm) were prepared in the form of a thin polymer film on the surface of a glass slide using polymerization.

Sensor Based on Molecularly Imprinted Polymer Membranes and Smartphone for Detection of Contamination in Cereals.

The combination of the generic mobile technology and inherent stability, versatility and cost-effectiveness of the synthetic receptors allows producing optical sensors for potentially any analyte of interest, and, therefore, to qualify as a platform technology for a fast routine analysis of a large number of contaminated samples. To support this statement, we present here a novel miniature sensor based on a combination of molecularly imprinted polymer (MIP) membranes and a smartphone, which could be used for the point-of-care detection of an important food contaminant, oestrogen-like toxin zearalenone associated with contamination of cereals. The detection is based on registration of natural fluorescence of zearalenone using a digital smartphone camera after it binds to the sensor recognition element.

X-ray photon diagnostics at the European XFEL.

The European X-ray Free-Electron Laser (European XFEL) (Altarelli et al., 2006; Tschentscher et al., 2017), the world's largest and brightest X-ray free-electron laser (Saldin et al.

MCP-based detectors: calibration and first photon radiation measurements.

Detectors based on microchannel plates (MCPs) are used to detect radiation from free-electron lasers. Three MCP detectors have been developed by JINR for the European XFEL (SASE1, SASE2 and SASE3 lines). These detectors are designed to operate in a wide dynamic range from the level of spontaneous emission to the SASE saturation level (between a few nJ up to 25 mJ), in a wide wavelength range from 0.

Development of a smartphone-based biomimetic sensor for aflatoxin B1 detection using molecularly imprinted polymer membranes.

A novel smartphone-based optical biomimetic sensor based on free-standing molecularly imprinted polymer (MIP) membranes was developed for rapid and sensitive point-of-care detection of aflatoxin B1. The developed MIP membranes were capable of selective recognition of the target analyte and, at the same time, of generation of a fluorimetric sensor response, which could be registered using the camera of a smartphone and analysed using image analysis. The developed system provides a possibility of synchronous detection of aflatoxin B1 in 96 channels.

Correlation-Driven Dimerization and Topological Gap Opening in Isotropically Strained Graphene.

The phase diagram of isotropically expanded graphene cannot be correctly predicted by ignoring either electron correlations, or mobile carbons, or the effect of applied stress, as was done so far. We calculate the ground state enthalpy (not just energy) of strained graphene by an accurate off-lattice quantum Monte Carlo correlated ansatz of great variational flexibility. Following undistorted semimetallic graphene at low strain, multideterminant Heitler-London correlations stabilize between ≃8.

Mechanical dissipation from charge and spin transitions in oxygen-deficient SrTiO surfaces.

Bodies in relative motion separated by a gap of a few nanometers can experience a tiny friction force. This non-contact dissipation can have various origins and can be successfully measured by a sensitive pendulum atomic force microscope tip oscillating laterally above the surface. Here, we report on the observation of dissipation peaks at selected voltage-dependent tip-surface distances for oxygen-deficient strontium titanate (SrTiO) surface at low temperatures (T = 5 K).

Fluorescent sensor systems based on nanostructured polymeric membranes for selective recognition of Aflatoxin B1.

Nanostructured polymeric membranes for selective recognition of aflatoxin B1 were synthesized in situ and used as highly sensitive recognition elements in the developed fluorescent sensor. Artificial binding sites capable of selective recognition of aflatoxin B1 were formed in the structure of the polymeric membranes using the method of molecular imprinting. A composition of molecularly imprinted polymer (MIP) membranes was optimized using the method of computational modeling.

Potential energy-driven spin manipulation via a controllable hydrogen ligand.

Spin-bearing molecules can be stabilized on surfaces and in junctions with desirable properties, such as a net spin that can be adjusted by external stimuli. Using scanning probes, initial and final spin states can be deduced from topographic or spectroscopic data, but how the system transitions between these states is largely unknown. We address this question by manipulating the total spin of magnetic cobalt hydride complexes on a corrugated boron nitride surface with a hydrogen-functionalized scanning probe tip by simultaneously tracking force and conductance.

Quantum engineering of spin and anisotropy in magnetic molecular junctions.

Single molecule magnets and single spin centres can be individually addressed when coupled to contacts forming an electrical junction. To control and engineer the magnetism of quantum devices, it is necessary to quantify how the structural and chemical environment of the junction affects the spin centre. Metrics such as coordination number or symmetry provide a simple method to quantify the local environment, but neglect the many-body interactions of an impurity spin coupled to contacts.

Electric field for tuning quantum entanglement in supported clusters.

We show that quantum entanglement, nowadays so widely observed and used in a multitude of systems, can be traced in the atomic spins of metal clusters supported on metal surfaces. Most importantly, we show that it can be voluntarily altered with external electric fields. We use a combination of ab initio and model Heisenberg-Dirac-Van Vleck quantum spin Hamiltonian calculations to show, with the example of a prototype system (Mn dimers on Ag(0 0 1) surface), that, in an inherently unentangled system an electric field can 'switch on' the entanglement and significantly change its critical temperature parameter.

Hepatitis C virus hypervariable region 1 variants presented on hepatitis B virus capsid-like particles induce cross-neutralizing antibodies.

Hepatitis C virus (HCV) infection is still a serious global health burden. Despite improved therapeutic options, a preventative vaccine would be desirable especially in undeveloped countries. Traditionally, highly conserved epitopes are targets for antibody-based prophylactic vaccines.

Controlling magnetism on metal surfaces with non-magnetic means: electric fields and surface charging.

We review the state of the art of surface magnetic property control with non-magnetic means, concentrating on metallic surfaces and techniques such as charge-doping or external electric field (EEF) application. Magneto-electric coupling via EEF-based charge manipulation is discussed as a way to tailor single adatom spins, exchange interaction between adsorbates or anisotropies of layered systems. The mechanisms of paramagnetic and spin-dependent electric field screening and the effect thereof on surface magnetism are discussed in the framework of theoretical and experimental studies.

Misfit-induced modification of structure and magnetism in O/Fe(001)-p(1×1).

The geometry of oxygen atoms in hollow sites of Fe nanoislands (⊘≈1-2  nm) on Fe(001) is modified by mesoscopic misfit-induced relaxations of the island atoms. Surface x-ray diffraction, scanning tunneling microscopy, and ab initio calculations indicate a 0.3 Å increased adsorption height [0.

Prime/boost immunization with DNA and adenoviral vectors protects from hepatitis D virus (HDV) infection after simultaneous infection with HDV and woodchuck hepatitis virus.

Hepatitis D virus (HDV) superinfection of hepatitis B virus (HBV) carriers causes severe liver disease and a high rate of chronicity. Therefore, a vaccine protecting HBV carriers from HDV superinfection is needed. To protect from HDV infection an induction of virus-specific T cells is required, as antibodies to the two proteins of HDV, p24 and p27, do not neutralize the HBV-derived envelope of HDV.

Colorimetric test-systems for creatinine detection based on composite molecularly imprinted polymer membranes.

An easy-to-use colorimetric test-system for the efficient detection of creatinine in aqueous samples was developed. The test-system is based on composite molecularly imprinted polymer (MIP) membranes with artificial receptor sites capable of creatinine recognition. A thin MIP layer was created on the surface of microfiltration polyvinylidene fluoride (PVDF) membranes using method of photo-initiated grafting polymerization.

Catalytic molecularly imprinted polymer membranes: development of the biomimetic sensor for phenols detection.

Portable biomimetic sensor devices for the express control of phenols content in water were developed. The synthetic binding sites mimicking active site of the enzyme tyrosinase were formed in the structure of free-standing molecularly imprinted polymer membranes. Molecularly imprinted polymer membranes with the catalytic activity were obtained by co-polymerization of the complex Cu(II)-catechol-urocanic acid ethyl ester with (tri)ethyleneglycoldimethacrylate, and oligourethaneacrylate.

[A portable sensory system for phenols detection based on molecular-imprinted polymers with catalytic properties].

Portable devices for the express control of the phenols content in water were developed. Polymers mimicking active site of the enzyme tyrosinase, synthesized using the method of molecular imprinting, were obtained by co-polymerization of the complex Cu (II)-catechol-urocanic acid ethyl ester with ethyleneglycoldimethacrylate. Concentration of phenols in the analyzed samples was detected using universal portable device oxymeter with the oxygen electrode in a close contact with catalytic molecularly-imprinted polymer as a transducer.

[Sensor system based on molecular-imprinted polymer membranes for the selective recognition of aflatoxin B1].

lymer membranes, synthesized using acrylamide as a functional monomer, were characterized by sufficient mechanical stability and high adsorbtion capability towards aflatoxin B1. The molecularly-imprinted polymer membranes were characterized by the pronounced imprinting effect as well as by insignificant adsorbtion of aflatoxins B2 and G2. Therefore, the synthetic analogues of bioreceptors able to individual recognition of aflatoxin B1 were obtained and used as a basis for the optical sensor system for aflatoxin B1 detection in a concentration range 1-500 ng/ml.

Tailoring exchange interactions in engineered nanostructures: an ab initio study.

We present a novel approach to spin manipulation in atomic-scale nanostructures. Our ab initio calculations clearly demonstrate that it is possible to tune magnetic properties of subnanometer structures by adjusting the geometry of the system. By the example of two surface-based systems we demonstrate the following.

[Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks].

Synthetic analogs of biological receptors able to group-selective recognition of aflatoxins were obtained using the combination of the technique of molecular imprinting with the method of computer modeling. The synthetic receptors were obtained in a form of thin and porous membranes based on semi-interpenetrating polymer networks. The selection of functional monomers able to noncovalent interactions with aflatoxins B1, B2, and G2 was based on the data of computer modeling.

Porous molecularly imprinted polymer membranes and polymeric particles.

Porous free-standing molecularly imprinted polymer membranes were synthesised by the method of in situ polymerisation using the principle of synthesis of interpenetrating polymer networks and tested in solid-phase extraction of triazine herbicides from aqueous solutions. Atrazine-specific MIP membranes were obtained by the UV-initiated co-polymerisation of methacrylic acid, tri(ethylene glycol) dimethacrylate, and oligourethane acrylate in the presence of a template (atrazine). Addition of oligourethane acrylate provided formation of the highly cross-linked MIP in a form of a free-standing 60 microm thick flexible membrane.