Wet-bonding technique with ethanol may reduce protease activity in dentin-resin interface following application of universal adhesive system.

Background: Greater degradation of the hybrid layer is expected when a universal adhesive system is used, especially in the conventional application strategy. Therefore, it would important to evaluate the effect of the ethanol (ETH) and a potential matrix protease inhibitor (caffeic acid phenethyl ester/ CAPE) to maximize the ability to achieve stable dentin bond strength. The aim of this study was to evaluated the effect of ETH on a wet-bonding technique, and dentin pretreatments with different concentrations of CAPE in ethanolic solution, followed by application of a universal adhesive system (Single Bond Universal) to inhibit proteolytic activity.

Enamel and Dentin Etching with Glycolic, Ferulic, and Phosphoric Acids: Demineralization Pattern, Surface Microhardness, and Bond Strength Stability.

This study evaluated the etching pattern, surface microhardness, and bond strength for enamel and dentin submitted to treatment with phosphoric, glycolic, and ferulic acids. Enamel and dentin blocks were treated with phosphoric, glycolic, and ferulic acid to evaluate the surface and adhesive interface by scanning electron microscopy (2000×). Surface microhardness (Knoop) was evaluated before and after etching, and microtensile bond strength was evaluated after application of a two-step adhesive system (Adper Single Bond 2, 3M ESPE) at 24 hours and 12 months storage time points.

Phenolic extract of Libidibia ferrea inhibits dentin endogenous enzymatic activity depending on the adhesive system strategy.

This study evaluated the influence of Libidibia ferrea (Lf) extract used as dentin pretreatment on the resin-dentin bond strength stability and dentin endogenous enzymatic activity. The phytochemical profile (PP) of the Lf extract was evaluated by liquid chromatography; particle size, polydispersity index (PdI), and zeta potential (ZP) were evaluated by dynamic light scattering. The tested groups were ER-Scotchbond Universal (SBU) in the etch-and-rinse (ER) mode; ERLf-SBU in the ER mode + Lf after etching; SE- SBU in the self-etch (SE) mode; and LfSE-Lf before SBU in the SE mode.

Polyphenol-enriched extract of Arrabidaea chica used as a dentin pretreatment or incorporated into a total-etching adhesive system: Effects on bonding stability and physical characterization.

The aim of this paper was to evaluate the physical properties and the long-term bond strength of a 2.5% polyphenol-enriched extract of Arrabidaea chica (AC) incorporated into both the phosphoric acid and the primer of a three-step total-etch adhesive, or into an aqueous solution as a dentin pretreatment. Fifty dentin surfaces received the treatments (n = 10): CON (control) - application of the three-step adhesive system (Adper Scotchbond Multipurpose, 3M ESPE); WAT - distilled water used as a pretreatment after dentin etching and before application of the adhesive system; ACPA - AC incorporated into the phosphoric acid; ACW - dentin pre-treatment with AC incorporated into an aqueous solution after etching; ACP - AC incorporated into the primer.

Long-term Evaluation of Dentin Matrix Stability and Gelatinolytic Activity after Dentin Pretreatment with Caffeic Acid Phenethyl Ester.

Purpose: To investigate the long-term effect of 0.05% or 0.1% caffeic acid phenethyl ester (CAPE) on dentin matrix stability and hybrid layer stability, using an etch-and-rinse (Adper Scotchbond Multipurpose/ASB) or a self-etch adhesive (Clearfil SE Bond/CSE).

Long-term nanomechanical properties and gelatinolytic activity of titanium tetrafluoride-treated adhesive dentin interface.

Objective: This study investigated the effects of dentin pretreatment with 2.5% titanium tetrafluoride (TiF) on nanomechanical properties, and the in situ gelatinolytic activity of the dentin-resin interface, for up to 6 months.

Methods: Twenty-four human teeth were prepared by exposing occlusal flat dentin surfaces, and were randomly assigned to experimental groups, according to application or non-application of a TiF pretreatment, and to the adhesive systems (Clearfil SE Bond or Scotchbond Universal).

Remineralizing effect of commercial fluoride varnishes on artificial enamel lesions.

The aim of this study was to evaluate soluble and insoluble fluoride concentrations in commercial varnishes, and their remineralization effect on artificial caries enamel lesions using surface and cross-sectional microhardness evaluations. Forty bovine enamel blocks were separated into four groups (n=10): control (no treatment), Enamelast (Ultradent Products), Duraphat (Colgate-Palmolive) and Clinpro White Varnish (3M ESPE). Surface enamel microhardness evaluations were obtained, artificial enamel caries lesions were developed by dynamic pH-cycling, and the varnishes were then applied every 6 days, after which the enamel blocks were submitted to dynamic remineralization by pH cycles.

Long-term evaluation of the stability of dentin matrix following treatments with aqueous solutions of titanium tetrafluoride at different concentrations.

Objective: The purpose of this study was to investigate the effects of aqueous solutions of different concentrations of titanium tetrafluoride (TiF) on dentin matrix stability up to six months.

Design: Dentin specimens prepared from fifteen nonerupted molars were demineralized and randomly distributed into groups: 2.5% TiF, 4% TiF 1000 ppm NaF, and control (distilled water).

Influence of dentin pretreatment with 2.5% titanium tetrafluoride on inhibiting caries at the tooth-restoration interface in situ.

Objective: Investigate the effects of dentin pretreatment with 2.5% titanium tetrafluoride (TiF) aqueous solution followed by two-step self-etching (CLE/Clearfil SE Bond) and one-step self-etching adhesive systems (SBU/Single Bond Universal) on carious lesion inhibition at the tooth-restoration interface using an in situ model.

Design: Sixty-four cavities at the enamel-dentin junction of dental fragments were randomly distributed according to groups (n=16): 1) TiF+CLE; 2) TiF+SBU; 3) CLE; 4) SBU.

Resin-dentin bond stability and physical characterization of a two-step self-etching adhesive system associated with TiF.

Objectives: To evaluate the bond strength to superficial (SD) and deep (DD) dentin after the use of 2.5% (T2.5%) or 4% (T4%) titanium tetrafluoride (TiF) in aqueous solution as a dentin pretreatment, or when incorporated into the primer (T2.

Titanium tetrafluoride incorporated into a two-step self-etching adhesive system: physico-mechanical characterization and bonding stability.

Objectives: To evaluate the influence of TiF incorporated into the primer (P) or bond (B) of a self-etching adhesive system on long-term dentin bonding, and evaluate the physico-mechanical properties of TiF-containing adhesives.

Methods: Dentin surfaces received the following treatments (n = 8): CL (Clearfil SE Bond); TiFCL (dentin pretreatment with TiF aqueous solution + CL); TiFP (TiF incorporated into the P); TiFB (TiF incorporated into the B). Microtensile bond strength (µTBS) and failure mode evaluations were performed after 24h, 6 months and one year, respectively.

Effect of high- or low-concentration bleaching agents containing calcium and/or fluoride on enamel microhardness.

The aim of this in vitro study was to evaluate enamel microhardness following bleaching treatments using either high- or low-concentration hydrogen peroxide (HP) agents containing calcium and/or fluoride. Sixty enamel blocks were bleached with 1 of 6 different bleaching agents (n = 10). The high-concentration HP agents were Whiteness HP Maxx (35% HP), Whiteness HP Blue (35% HP, 2% calcium gluconate), Pola Office+ (37.

Enamel Mineral Content Changes After Bleaching With High and Low Hydrogen Peroxide Concentrations: Colorimetric Spectrophotometry and Total Reflection X-ray Fluorescence Analyses.

The purpose of this study was to evaluate the calcium (Ca) and phosphorous (P) content in enamel bleached with high and low concentrations of hydrogen peroxide (HP) using Total Reflection X-Ray Fluorescence (TXRF) and colorimetric spectrophotometry (SPEC). Forty-eight sound human third molars were used. Their roots were embedded in polystyrene resin and immersed for seven days in an artificial saliva solution.

Salivary levels of nickel, chromium, iron, and copper in patients treated with metal or esthetic fixed orthodontic appliances: A retrospective cohort study.

The purpose of this retrospective cohort study was to measure the salivary levels of nickel (Ni), chromium (Cr), iron (Fe) and copper (Cu) released from metal and esthetic fixed orthodontic appliances. Ninety patients were divided into three groups (n=30): control (those who had never undergone orthodontic treatment), metal appliance (stainless steel brackets and bands, and nitinol archwires) and esthetic appliance (polycarbonate brackets and tubes, and rhodium-coated nitinol archwires). Patients undergoing orthodontic treatment had used their appliances for periods between one and six months.

Efficacy of Home-use Bleaching Agents Delivered in Customized or Prefilled Disposable Trays: A Randomized Clinical Trial.

The purpose of this study was to evaluate bleaching methods containing hydrogen peroxide (HP) or carbamide peroxide (CP), dispensed in customized or prefilled trays, in terms of color change, tooth sensitivity, gingival irritation, acceptance, and comfort. Seventy-five volunteers were randomly selected and distributed according to the whitening agent (n=25): 10% HP dispensed in prefilled trays (Opalescence Go 10%) and 9.5% HP (Pola Day) and 10% CP both delivered in customized trays (Opalescence PF 10%).

Dental bleaching with ozone: effects on color and enamel microhardness.

The aim of this in vitro study was to evaluate the effects of dental bleaching with ozone (O3) on color change and enamel microhardness. Enamel blocks (3 x 3 x 3mm) were randomly distributed for treatments (n=10). Color change (ΔE) and Knoop microhardness of the enamel blocks were evaluated before and after the following treatments: C - deionized water (control); HP - 37.

In Vitro Effects of 2.5% Titanium Tetrafluoride on Streptococcus Mutans and Lactobacillus Casei in Dentin Followed by Self-Etching Adhesive Systems.

The aim was to evaluate the effect of a 2.5% titanium tetrafluoride (TiF4) solution followed by self-etching adhesives against Streptococcus mutans/Sm and Lactobacillus casei/Lc. Four cylindrical-shaped cavities were performed on each dentin surface of 40 third molars and contaminated with Sm or Lc.

Influence of an arginine-containing toothpaste on bond strength of different adhesive systems to eroded dentin.

The aim of this study was to evaluate the bond strength of different adhesive systems to eroded dentin following toothbrushing with an arginine-containing toothpaste. Sixty standardized 3 × 3 × 2-mm fragments of root dentin (n = 10) were prepared. After all surfaces except the buccal surfaces were impermeabilized, specimens were subjected to an erosive wear protocol and stored for 24 hours at 37°C.

Rinsing with antacid suspension reduces hydrochloric acid-induced erosion.

Objective: Mouthrinsing with antacids, following erosive episodes, have been suggested as a preventative strategy to minimize tooth surface loss due to their neutralizing effect. The purpose of this in situ study was to evaluate the effect of an antacid suspension containing sodium alginate, sodium bicarbonate and calcium carbonate in controlling simulated erosion of enamel of intrinsic origin.

Design: The experimental units were 48 slabs (3×3×2mm) of bovine enamel, randomly divided among 12 volunteers who wore palatal appliances with two enamel slabs.

Inhibition of demineralization around the enamel-dentin/restoration interface after dentin pretreatment with TiF4 and self-etching adhesive systems.

Objectives: The objective of this study was to evaluate the inhibition of demineralization around enamel-dentin/restoration interface after dentin pretreatment with 2.5% titanium tetrafluoride (TiF4).

Materials And Methods: Forty dental class V cavities at the cementoenamel junction were distributed into four groups (n = 10), according to the presence or absence of TiF4 and to the adhesive system (Clearfil SE Bond/CL and Adper EasyOne/AD), and restored with a resin composite.

TiF4 improves microtensile bond strength to dentin when using an adhesive system regardless of primer/bond application timing and method.

Objectives: This study evaluated the bond strength of a two-step conventional adhesive system to dentin pretreated with 2.5 % titanium tetrafluoride (TiF(4)) according to application timing (before or after acid conditioning) and primer/adhesive application method (active or passive).

Materials And Methods: Dentin surfaces were randomly treated with different adhesive procedures (n = 6): etching with phosphoric acid (PA) + primer/adhesive (Adper Single Bond 2/3M ESPE) actively applied; PA + primer/adhesive passively applied; TiF(4) before PA + primer/adhesive actively applied; TiF(4) before PA + primer/adhesive passively applied; TiF(4) after PA + primer/adhesive actively applied; and TiF(4) after PA + primer/adhesive passively applied.

Kinetics of salivary pH after acidic beverage intake by patients undergoing orthodontic treatment.

The saliva of patients undergoing orthodontic treatment with fixed appliances can potentially present a delay in the diluting, clearing, and buffering of dietary acids due to an increased number of retention areas. The aim of this clinical trial was to compare salivary pH kinetics of patients with and without orthodontic treatment, following the intake of an acidic beverage. Twenty participants undergoing orthodontic treatment and 20 control counterparts had their saliva assessed for flow rate, pH, and buffering capacity.

Nanomechanical properties, SEM, and EDS microanalysis of dentin treated with 2.5% titanium tetrafluoride, before and after an erosive challenge.

The aim was to assess the nanohardness (H) and the reduced modulus of elasticity (Er ) of 2.5% titanium tetrafluoride (TiF4 ) modified dentin, before and after an erosive challenge with 0.3% citric acid (CA).

Influence of dentin pretreatment with titanium tetrafluoride and self-etching adhesive systems on microtensile bond strength.

Purpose: To evaluate the effect of dentin pretreatment with 2.5% titanium tetrafluoride (TiF4) on microtensile bond strength (microTBS) of one- or two-step self-etching adhesive systems.

Methods: 24 human sound third molars were used.