Deposition of Porous Sorbents on Fabric Supports.

A microwave deposition technique for silanes, previously described for production of oleophobic fabrics, is adapted to provide a fabric support material that can be subsequently treated by dip coating. Dip coating with a sol preparation provides a supported porous layer on the fabric. In this case, the porous layer is a porphyrin functionalized sorbent system based on a powdered material that has been demonstrated previously for the capture and conversion of phosgene.

Improving Sorbents for Glycerol Capture in Biodiesel Refinement.

Biodiesel is produced by transesterification of animal fat, vegetable oil, or waste cooking oil with alcohol. After production costs, the economic viability of biodiesel is dependent on what steps are necessary to remove impurities following synthesis and the effectiveness of quality control analysis. Solid-phase extraction offers a potentially advantageous approach in biodiesel processing applications.

Electrolyte-Sensing Transistor Decals Enabled by Ultrathin Microbial Nanocellulose.

We report an ultra-thin electronic decal that can simultaneously collect, transmit and interrogate a bio-fluid. The described technology effectively integrates a thin-film organic electrochemical transistor (sensing component) with an ultrathin microbial nanocellulose wicking membrane (sample handling component). As far as we are aware, OECTs have not been integrated in thin, permeable membrane substrates for epidermal electronics.

High Aspect Ratio Carbon Nanotube Membranes Decorated with Pt Nanoparticle Urchins for Micro Underwater Vehicle Propulsion via H2O2 Decomposition.

The utility of unmanned micro underwater vehicles (MUVs) is paramount for exploring confined spaces, but their spatial agility is often impaired when maneuvers require burst-propulsion. Herein we develop high-aspect ratio (150:1), multiwalled carbon nanotube microarray membranes (CNT-MMs) for propulsive, MUV thrust generation by the decomposition of hydrogen peroxide (H2O2). The CNT-MMs are grown via chemical vapor deposition with diamond shaped pores (nominal diagonal dimensions of 4.

Platinum-paper micromotors: an urchin-like nanohybrid catalyst for green monopropellant bubble-thrusters.

Platinum nanourchins supported on microfibrilated cellulose films (MFC) were fabricated and evaluated as hydrogen peroxide catalysts for small-scale, autonomous underwater vehicle (AUV) propulsion systems. The catalytic substrate was synthesized through the reduction of chloroplatinic acid to create a thick film of Pt coral-like microstructures coated with Pt urchin-like nanowires that are arrayed in three dimensions on a two-dimensional MFC film. This organic/inorganic nanohybrid displays high catalytic ability (reduced activation energy of 50-63% over conventional materials and 13-19% for similar Pt nanoparticle-based structures) during hydrogen peroxide (H2O2) decomposition as well as sufficient propulsive thrust (>0.

Extraction of Perchlorate Using Porous Organosilicate Materials.

Sorbent materials were developed utilizing two morphological structures, comprising either hexagonally packed pores (HX) or a disordered pore arrangement (CF). The sorbents were functionalized with combinations of two types of alkylammonium groups. When capture of perchlorate by the sorbents was compared, widely varying performance was noted as a result of differing morphology and/or functional group loading.

Stabilization of RNA through absorption by functionalized mesoporous silicate nanospheres.

The potential for encapsulating RNA within tunable, semi-permeable structures for storage and transportation purposes offers an interesting approach to the reduction of stringent storage requirements that often hamper the field application of genetic analysis methods. In this study, we assessed the potential for application of functionalized, porous silicate sorbents in maintaining nucleic acid integrity. Mesoporous silica nanoparticles (MSNs) with and without incorporated stabilizing reagents were used to encapsulate triosephosphate isomerase mRNA of Arabidopsis thaliana.

Porphyrin-embedded silicate materials for detection of hydrocarbon solvents.

The development of porphyrin-embedded mesoporous organosilicate materials for application to the detection of volatile hydrocarbon solvents is described. Design of the receptor and optical indicator construct begins with parallel selection of the porphyrin indicator and design of the mesoporous sorbent. For the porphyrin indicator, high binding affinity and strong changes in spectrophotometric character upon target interaction are desired.

Directional photoinduced electron transfer in paraquat silicate thin films containing entrapped ruthenium(II)-tris(bathophenanthroline-disulfonate).

We have demonstrated directional photoinduced electron transfer in paraquat silicate thin films containing entrapped ruthenium(II)-tris(bathophenanthroline-disulfonate (RuBPS). The films were made by electrochemically-induced hydrolysis of a silane analogue of paraquat with ruthenium(II)-tris(bathophenanthroline-disulfonate as its ion pair.

Solid-phase extraction using hierarchical organosilicates for enhanced detection of nitroenergetic targets.

A novel porous organosilicate material was evaluated for application as a solid phase extraction sorbent for preconcentration of nitroenergetic targets from aqueous solution prior to HPLC analysis. The performance of the sorbent in spiked deionized water, groundwater, and surface water was evaluated. Targets considered included 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, RDX, HMX, and nitroglycerin.

Macroporous silica for concentration of nitroenergetic targets.

Hierarchical organosilicate sorbents were synthesized which possess structure on two length scales: macropores of approximately 1microm lined by mesopores (35-45A). The incorporation of macropores provides enhanced flow-through characteristics over purely mesoporous materials, thereby reducing back pressure when used in column formats. Materials of this type with varied surface groups were applied to the adsorption of 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) in both batch and column formats.

Mesoporous materials in sensing: morphology and functionality at the meso-interface.

Mesoporous materials are finding increasing utility in sensing applications. These applications can benefit from a surface area that may exceed 1,000 m(2) g(-1) and fast diffusion of analytes through a porous structure. This article reviews recent developments in mesoporous materials-based sensing and provides examples of the impact of different surface functionality, pore structure, and macro-morphology in an attempt to illustrate the contribution of these factors to the selectivity and sensitivity of a sensor response.

Fluorescent silicate materials for the detection of paraoxon.

Porphyrins are a family of highly conjugated molecules that strongly absorb visible light and fluoresce intensely. These molecules are sensitive to changes in their immediate environment and have been widely described for optical detection applications. Surfactant-templated organosilicate materials have been described for the semi-selective adsorption of small molecule contaminants.

Mesoporous Silicate Materials in Sensing.

Mesoporous silicas, especially those exhibiting ordered pore systems and uniform pore diameters, have shown great potential for sensing applications in recent years. Morphological control grants them versatility in the method of deployment whether as bulk powders, monoliths, thin films, or embedded in coatings. High surface areas and pore sizes greater than 2 nm make them effective as adsorbent coatings for humidity sensors.

Imprinted nanoporous organosilicas for selective adsorption of nitroenergetic targets.

Periodic mesoporous organosilicas incorporating diethylbenzene bridges in their pore walls were applied for the adsorption of nitroenegetic targets from aqueous solution. The materials were synthesized by co-condensing 1,4-bis(trimethoxysilylethyl)benzene (DEB) with 1,2-bis(trimethoxysilyl)ethane to improve structural characteristics. Molecular imprinting of the pore surfaces was employed through the use of a novel target-like surfactant to further enhance selectivity for targets of interest (tri- and dinitrotoluenes) over targets of similar structure ( p-cresol and p-nitrophenol).

Nanoporous organosilicas as preconcentration materials for the electrochemical detection of trinitrotoluene.

We describe the use of nanoporous organosilicas for rapid preconcentration and extraction of trinitrotoluene (TNT) for electrochemical analysis and demonstrate the effect of template-directed molecular imprinting on TNT adsorption. The relative effects of the benzene (BENZ)- and diethylbenzene (DEB)-bridged organic-inorganic polymers, having narrow or broad pore size distributions, respectively, on electrochemical response and desorption behavior were examined. Sample volumes of 0.