Preoperative Degenerative Changes at the Tibial Sesamoid-Metatarsal Joint in Hallux Valgus: Association With Postoperative Patient-Reported Outcomes After Modified Lapidus Procedure.

Background: Degenerative changes at the sesamoid-metatarsal joints (SMJs) may be a source of pain following hallux valgus surgery. The aims of this study were to describe degenerative changes at the SMJs on weightbearing computed tomography (WBCT) scans and, secondarily, investigate their association with 1-year patient-reported outcome scores following a modified Lapidus procedure for hallux valgus. We hypothesized that reduced joint space in the SMJs would correlate with worse patient-reported outcomes.

Influence of Isolated Talonavicular and Subtalar Joint Arthrodesis on Hindfoot Kinematics and Range of Motion During Cadaveric Gait Simulation.

Background: Isolated subtalar and talonavicular joint arthrodeses have been associated with adjacent joint arthritis and altered hindfoot kinematics during simplified loading scenarios. However, the effect on kinematics during dynamic activity is unknown. This study assessed changes in subtalar and talonavicular kinematics after isolated talonavicular (TN) and subtalar (ST) arthrodesis, respectively, during stance simulations.

Peroneus Brevis to Longus Tendon Transfer in the Treatment of Flexible Progressive Collapsing Foot Deformity: A Cadaveric Study.

Background: Although operative treatment of the flexible progressive collapsing foot deformity (PCFD) remains controversial, correction of residual forefoot varus and stabilization of the medial column are important components of reconstruction. A peroneus brevis (PB) to peroneus longus (PL) tendon transfer has been proposed to address these deformities. The aim of our study was to determine the effect of an isolated PB-to-PL transfer on medial column kinematics and plantar pressures in a simulated PCFD (sPCFD) cadaveric model.

Passive Eversion Assessment for Progressive Collapsing Foot Deformity After Lateral Column Lengthening: A Cadaveric Biomechanical Study.

Background: Reduced hindfoot eversion motion has been proposed as a cause of increased lateral foot pressure following lateral column lengthening (LCL) for progressive collapsing foot deformity (PCFD). A subjective intraoperative assessment of passive eversion has been suggested to help evaluate correction; however, it is unclear how passive eversion correlates with objective measurements of foot stiffness. Our objectives were to quantify the relationship between the maximum passive eversion in hindfoot joints following LCL with plantar pressure during stance and to determine the influence of wedge size on these outcomes.

Medial Meniscus Posterior Root Tears Lead to Changes in Joint Contact Mechanics at Low Flexion Angles During Simulated Gait.

Background: Previous biomechanical studies evaluating medial meniscus posterior root tears (MMPRTs) are limited to low loads applied at specified loading angles, which cannot capture the effects of MMPRTs during the multidirectional forces and moments placed across the knee during physiological activities.

Purpose: To quantify the effects of MMPRTs on knee joint contact mechanics during simulated gait.

Study Design: Controlled laboratory study.

Hindfoot Arthrodeses and the Order of Joint Fixation Influence Tibiotalar Kinematics During Simulated Stance.

Background: Although hindfoot arthrodeses relieve pain and correct deformity, they have been associated with progressive tibiotalar degeneration. The objective was to quantify changes in tibiotalar kinematics after hindfoot arthrodeses, both isolated subtalar and talonavicular, as well as double arthrodesis, and to determine if the order of joint fixation affects tibiotalar kinematics.

Methods: Hindfoot arthrodeses were performed in 14 cadaveric mid-tibia specimens.

The Foot and Ankle Kinematics of a Simulated Progressive Collapsing Foot Deformity During Stance Phase: A Cadaveric Study.

Background: Progressive collapsing foot deformity (PCFD) is a complex pathology associated with tendon insufficiency, ligamentous failure, joint malalignment, and aberrant plantar force distribution. Existing knowledge of PCFD consists of static measurements, which provide information about structure but little about foot and ankle kinematics during gait. A model of PCFD was simulated in cadavers (sPCFD) to quantify the difference in joint kinematics and plantar pressure between the intact and sPCFD conditions during simulated stance phase of gait.

Kinematic Analysis of Sequential Partial-Midfoot Arthrodesis in Simulated Gait Cadaver Model.

Background: Primary tarsometatarsal (TMT) arthrodesis is gaining popularity in the surgical treatment of Lisfranc injuries. However, few studies have evaluated biomechanical effects of TMT arthrodesis. The purpose of this study was to compare the kinematics of joints adjacent to the midfoot during simulations of stance before and after sequential arthrodesis of the first, second, and third TMT joints.

Cadaveric Gait Simulation of the Effect of Subtalar Arthrodesis on Total Ankle Replacement Kinematics.

Background: Patients undergoing total ankle replacement (TAR) often have symptomatic adjacent joint arthritis and deformity. Subtalar arthrodesis can effectively address a degenerative and/or malaligned hindfoot, but there is concern that it places abnormal stresses on the TAR and adjacent joints of the foot, potentially leading to early TAR failure. This study hypothesized that ankle and talonavicular joint kinematics would be altered after subtalar arthrodesis in the setting of TAR.

Orthosis and Foot Structure Affect the Fifth Metatarsal Principal Strains During Simulated Level Walking.

Background: Fractures of the proximal fifth metatarsal bone are common injuries in elite athletes and are associated with high rates of delayed union and nonunion. Structural features of the foot may increase fracture risk in some individuals, emphasizing the need for intervention strategies to prevent fracture. Although orthotic devices have shown promise in reducing fractures of the fifth metatarsal bone, the effect of orthosis on fifth metatarsal strains is not well understood.

Loosening of Posteromedial Meniscal Root Repairs Affects Knee Mechanics: A Finite Element Study.

Meniscal root repairs are susceptible to unrecoverable loosening that may displace the meniscus from the initial position reduced during surgery. Despite this, the effects of a loosened meniscal root repair on knee mechanics are unknown. We hypothesized that anatomic root repairs without loosening would restore knee mechanics to the intact condition better than loosened anatomic root repairs, but that loosened repairs would restore mechanics better than untreated meniscal root tears.

Biomechanical evaluation of total ankle arthroplasty. Part I: Joint loads during simulated level walking.

In total ankle arthroplasty, the interaction at the joint between implant and bone is driven by a complex loading environment. Unfortunately, little is known about the loads at the ankle during daily activities since earlier attempts use two- or three-dimensional models to explore simplified joint mechanics. Our goal was to develop a framework to calculate multi-axial loads at the joint during simulated level walking following total ankle arthroplasty.

Bioinspired material architectures from bighorn sheep horncore velar bone for impact loading applications.

Rocky Mountain bighorn sheep rams (Ovis canadensis canadensis) routinely conduct intraspecific combat where high energy cranial impacts are experienced. Previous studies have estimated cranial impact forces to be up to 3400 N during ramming, and prior finite element modeling studies showed the bony horncore stores 3 × more strain energy than the horn during impact. In the current study, the architecture of the porous bone within the horncore was quantified, mimicked, analyzed by finite element modeling, fabricated via additive manufacturing, and mechanically tested to determine the suitability of the novel bioinspired material architecture for use in running shoe midsoles.

Biomechanical evaluation of total ankle arthroplasty. Part II: Influence of loading and fixation design on tibial bone-implant interaction.

Finite element (FE) models to evaluate the burden placed on the interaction between total ankle arthroplasty (TAA) implants and the bone often rely on peak axial forces. However, the loading environment of the ankle is complex, and it is unclear whether peak axial forces represent a challenging scenario for the interaction between the implant and the bone. Our goal was to determine how the loads and the design of the fixation of the tibial component of TAA impact the interaction between the implant and the bone.

Nonanatomic Placement of Posteromedial Meniscal Root Repairs: A Finite Element Study.

Nonanatomic placement of posteromedial meniscal root repairs alters knee mechanics; however, little is known about how the position and magnitude of misplacement affect knee mechanics. Finite element knee models were developed to assess changes in cartilage and meniscus mechanics for anatomic and various nonanatomic repairs with respect to intact. In total, 25 different repair locations were assessed at loads of 500 N and 1000 N.

Loosening of Transtibial Pullout Meniscal Root Repairs due to Simulated Rehabilitation Is Unrecoverable: A Biomechanical Study.

Purpose: To determine whether meniscal root repairs recover from displacement due to rehabilitative loading.

Methods: Transtibial pullout repairs of the posteromedial meniscal root were performed in 16 cadaveric ovine knees. Single- and double-tunnel repairs using the 2-simple suture technique were cyclically loaded in tension to 10,000 cycles, allowed to rest, and loaded in tension again.

Early Osteoarthritis After Untreated Anterior Meniscal Root Tears: An In Vivo Animal Study.

Background: Meniscal root tears cause menisci and their insertions to inadequately distribute loads and potentially leave underlying articular cartilage unprotected. Untreated meniscal root tears are becoming increasingly recognized to induce joint degradation; however, little information is known about anterior meniscal root tears and how they affect joint tissue.

Purpose: To observe the early degenerative changes within the synovial fluid, menisci, tibial articular cartilage, and subchondral bone after arthroscopic creation of untreated anterior meniscal root tears.

Overlap Between Anterior Cruciate Ligament and Anterolateral Meniscal Root Insertions: A Scanning Electron Microscopy Study.

Background: The anterolateral meniscal root (ALMR) has been reported to intricately insert underneath the tibial insertion of the anterior cruciate ligament (ACL). Previous studies have begun to evaluate the relationship between the insertion areas and the risk of iatrogenic injuries; however, the overlap of the insertions has yet to be quantified in the sagittal and coronal planes.

Purpose: To investigate the insertions of the human tibial ACL and ALMR using scanning electron microscopy (SEM) and to quantify the overlap of the ALMR insertion in the coronal and sagittal planes.

Direct versus indirect ACL femoral attachment fibres and their implications on ACL graft placement.

Purpose: To further elucidate the direct and indirect fibre insertion morphology within the human ACL femoral attachment using scanning electron microscopy and determine where in the footprint each fibre type predominates. The hypothesis was that direct fibre attachment would be found centrally in the insertion site, while indirect fibre attachment would be found posteriorly adjacent to the posterior articular cartilage.

Methods: Ten cadaveric knees were dissected to preserve and isolate the entirety of the femoral insertion of the ACL.

Assessment of Patellar Tendon Reflex Responses Using Second-Order System Characteristics.

Deep tendon reflex tests, such as the patellar tendon reflex (PTR), are widely accepted as simple examinations for detecting neurological disorders. Despite common acceptance, the grading scales remain subjective, creating an opportunity for quantitative measures to improve the reliability and efficacy of these tests. Previous studies have demonstrated the usefulness of quantified measurement variables; however, little work has been done to correlate experimental data with theoretical models using entire PTR responses.