Complication rates and efficacy of single-injection vs. continuous interscalene nerve block: a prospective evaluation following arthroscopic primary rotator cuff repair without a concomitant open procedure.

Background: To compare the complications and efficacy of pain relief of the interscalene anesthetic block using either a single-injection (SI) vs. a continuous, indwelling catheter (CIC) for arthroscopic rotator cuff repair surgery.

Methods: Patients undergoing primary, arthroscopic rotator cuff repair without concomitant open procedure or biceps tenodesis were prospectively enrolled by 4 fellowship-trained sports medicine and shoulder surgeons.

Larger-diameter trunnions and bolt-reinforced taper junctions are associated with less tribocorrosion in reverse total shoulder arthroplasty.

Background: Morse taper junction tribocorrosion is recognized as an important failure mode in total hip arthroplasty. Although taper junctions are used in almost all shoulder arthroplasty systems currently available in the United States, with large variation in design, limited literature has described comparable analyses of taper damage in these implants. In this study, taper junction damage in retrieved reverse total shoulder arthroplasty (RTSA) implants was assessed and analyzed.

Stemless reverse total shoulder arthroplasty: a systematic review.

Background: The use of reverse total shoulder arthroplasty and stemless anatomic total shoulder replacement has been increasing in the United States every year. Stemless humeral components in reverse total shoulder arthroplasty are only approved for clinical trials in the United States with an investigational device exception with limited data.

Methods: A systematic review on stemless reverse total shoulder arthroplasty was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines.

Radiographic evaluation of humeral head reconstruction with stemmed and stemless spherical implants compared with stemless elliptical head implants.

Background: The purpose of this study was to compare the accuracy of anatomic reconstruction of three different humeral head designs after anatomic total shoulder arthroplasty.

Methods: Postoperative radiographs of 117 patients who underwent anatomic total shoulder arthroplasty with three different implant designs (stemmed spherical, stemless spherical, and stemless elliptical) were analyzed for landmarks that represented the prearthritic state and final implant position. We assessed the change in center of rotati7on and humeral head height on the anteroposterior view and the percentage of prosthesis overhang on the axillary lateral view.

Baseplate Options for Reverse Total Shoulder Arthroplasty.

Purpose Of Review: Baseplate fixation has been known to be the weak link in reverse total shoulder arthroplasty (RTSA). A wide variety of different baseplates options are currently available. This review investigates the recent literature to present the reader with an overview of the currently available baseplate options and modes of fixation.

Venous Thromboembolism After Shoulder Arthoplasty and Arthroscopy.

Venous thromboembolism (VTE) in the orthopaedic literature largely focuses on lower extremity trauma and arthroplasty, with relatively few investigations of VTE after shoulder surgery. Because the rate of shoulder surgery, especially arthroplasty, continues to expand, it is important for practicing surgeons to understand the magnitude of risk, potential consequences, and prevention methods with regard to VTE. VTE after shoulder surgery has been a topic of increasing interest over the past decade, and the purpose of this review is to examine the recent literature on pathophysiology, risk factors, incidence, diagnosis, sequelae, prevention, treatment, and current recommendations regarding VTE after shoulder surgery.

Outcomes Following Low-Profile Mesh Plate Osteosynthesis of Patella Fractures.

Treatment of patella fractures is fraught with complications and historically poor functional outcomes. A fixation method that allows for early mobilization and decreases symptomatic hardware rates will improve knee range of motion, postoperative functional status, and reoperation rates. The purpose of this study was to evaluate the functional outcomes after locked plate osteosynthesis of patella fractures at a Level 1 trauma center.

Influence of Body Mass Index on Clinical Outcomes in Reverse Total Shoulder Arthroplasty.

The purpose of this study was to compare reverse total shoulder arthroplasty (RTSA) outcomes in normal weight, overweight, and obese patients. A RTSA outcomes registry was reviewed for rotator cuff-deficient patients with a minimum 2-year follow-up. Fractures, rheumatoid arthritis, and revisions were excluded.

Novel Anterior Plating Technique for Patella Fracture Fixation.

Patella fracture fixation remains a significant challenge for orthopedic surgeons. Although tension band fixation allows for reliable osseous union, especially in simple fracture patterns, it still presents several problems. Plate fixation of patella fractures is a method that allows for more rigid stabilization and earlier mobilization.

Intravenous tranexamic acid reduces total blood loss in reverse total shoulder arthroplasty: a prospective, double-blinded, randomized, controlled trial.

Background: Patients undergoing reverse total shoulder arthroplasty (RTSA) are at risk of significant perioperative blood loss. To date, few studies have examined the effectiveness of tranexamic acid (TXA) to reduce blood loss in the setting of RTSA.

Methods: In a prospective, double-blinded, single-surgeon trial, we analyzed 102 patients undergoing primary RTSA who were randomized to receive intravenous TXA (n = 53) or placebo (n = 49).

Biomechanical Evaluation of All-Polyethylene Pegged Bony Ingrowth Glenoid Fixation Techniques on Implant Micromotion.

Newer glenoid components that allow for hybrid cement fixation via traditional cementation of peripheral pegs and bony ingrowth into an interference-fit central peg introduce the possibility of long-term biological fixation. However, little biomechanical work has been done on the initial stability of these components and the various fixation options. We conducted a study in which all-polyethylene glenoid components with a centrally fluted peg were implanted in polyurethane blocks with interference-fit, hybrid cement, and fully cemented fixation (5 per fixation group).

Use of a Topical Thrombin-Based Hemostatic Agent in Shoulder Arthroplasty.

Shoulder arthroplasty is associated with significant blood loss, often requiring blood transfusion. Hemostatic agents are used in various surgical specialties to minimize blood loss, but to date few studies have examined their efficacy in shoulder arthroplasty. We retrospectively reviewed 211 consecutive shoulder arthroplasty cases performed by a single surgeon.

Elucidating trends in revision reverse total shoulder arthroplasty procedures: a retrieval study evaluating clinical, radiographic, and functional outcomes data.

Background: The purpose of this study was to explore relationships between damage modes in explanted reverse total shoulder arthroplasty (RTSA) components, patient and radiographic risk factors, and functional data to elucidate trends in RTSA failure.

Methods: Fifty RTSA systems, retrieved from 44 patients, with 50 polyethylene (PE) liners, 30 glenospheres, 21 glenoid baseplates, 13 modular humeral metaphases, and 17 humeral stems, were examined for damage modes, including abrasion, burnishing, dishing, embedding, scratching, and pitting. PE liners were also analyzed for delamination and edge deformation.

The impact of rotator cuff deficiency on structure, mechanical properties, and gene expression profiles of the long head of the biceps tendon (LHBT): Implications for management of the LHBT during primary shoulder arthroplasty.

The long head of the biceps tendon (LHBT) occupies a unique proximal intra-articular and distal extra-articular position within the human shoulder. In the presence of a rotator cuff (RC) tear, the LHBT is recruited into an accelerated role undergoing potential mechanical and biochemical degeneration. Intra-articular sections of the LHBT were harvested during primary shoulder arthroplasty from patients with an intact or deficient RC.

Preoperative deltoid size and fatty infiltration of the deltoid and rotator cuff correlate to outcomes after reverse total shoulder arthroplasty.

Background: Reverse total shoulder arthroplasty (RTSA) allows the deltoid to substitute for the nonfunctioning rotator cuff. To date, it is unknown whether preoperative deltoid and rotator cuff parameters correlate with clinical outcomes.

Questions/purposes: We asked whether associations exist between 2-year postoperative results (ROM, strength, and outcomes scores) and preoperative (1) deltoid size; (2) fatty infiltration of the deltoid; and/or (3) fatty infiltration of the rotator cuff.

The evaluation of the failed shoulder arthroplasty.

As the incidence of shoulder arthroplasty continues to rise, the orthopedic shoulder surgeon will be increasingly faced with the difficult problem of evaluating a failed shoulder arthroplasty. The patient is usually dissatisfied with the outcome of the previous arthroplasty as a result of pain, but may complain of poor function due to limited range of motion or instability. A thorough and systematic approach is necessary so that the most appropriate treatment pathway can be initiated.

Clinical and radiographic results of cementless reverse total shoulder arthroplasty: a comparative study with 2 to 5 years of follow-up.

Background: Most studies of reverse total shoulder arthroplasty (RTSA) involve cemented humeral stems. To our knowledge, this is the first study to compare the results of cementless RTSA, using a porous-coated stem designed for uncemented fixation, with cemented RTSA.

Methods: A prospective database of patients undergoing RTSA was retrospectively reviewed for patients with a diagnosis of cuff tear arthropathy or severe rotator cuff deficiency with minimum 2-year follow-up.

Traumatic dural tears: what do we know and are they a problem?

Background Context: Iatrogenic dural tears are common complications encountered in spine surgery with known ramifications. There is little information, however, with respect to the implications and complications of traumatic dural tears.

Purpose: To describe the demographics and characteristics of traumatically acquired dural tears and evaluate the complication rate associated with traumatic dural tears in patients who have undergone surgical treatment for spine injuries.

Arthrodesis of the elbow.

Elbow arthrodesis (EA) is a procedure reserved for the salvage of failed elbow reconstruction or elbow injuries that defy reconstruction of a useful joint. Although arthrodesis of some joints is often straightforward and predictable, EA is technically difficult and associated with a high rate of complications. Furthermore, a successful EA does not translate to a gratifying clinical success.

The lateral capitellohumeral angle in normal children: mean, variation, and reliability in comparison to Baumann's angle.

Background: Angular deformity is the most common complication of supracondylar humerus fracture. Baumann's angle (BA) is an established radiographic measure of coronal plane deformity after this injury. Numerous radiographic methods have been used to assess sagittal plane deformity, however, the mean, variability, and reliability of these measures has not been established.

Risk factors for chondrolysis of the glenohumeral joint: a study of three hundred and seventy-five shoulder arthroscopic procedures in the practice of an individual community surgeon.

Background: Glenohumeral chondrolysis is a complication of arthroscopic shoulder surgery characterized by the dissolution of the articular cartilage of the glenoid and the humeral head. An analysis of 375 intra-articular shoulder arthroscopic surgical procedures by an individual community orthopaedic surgeon was performed to explore which factors or combinations of factors might be associated with glenohumeral chondrolysis.

Methods: The occurrence of chondrolysis was correlated with several demographic and surgical variables with use of hazard ratios from Cox proportional hazards models and Kaplan-Meier survivorship curves.

Treatment of plastic deformation of the forearm in young adults with double-level osteotomies: case reports.

Plastic deformation of the forearm is a rare injury in young adults that occurs when a slow bending or rotational force is applied to the arm, most commonly in the setting of an industrial workplace accident. There are currently no guidelines for treatment of the residual forearm deformity that often results in limitations of forearm supination and pronation. We present 2 cases demonstrating that deformity correction with single cortex, double-level osteotomies combined with rigid plate fixation and early range of motion exercise that results in good functional outcomes.

Characterizing gait induced normal strains in a murine tibia cortical bone defect model.

The critical role that mechanical stimuli serve in mediating bone repair is recognized but incompletely understood. Further, previous attempts to understand this role have utilized application of externally applied mechanical loads to study the tissue's response. In this project, we have therefore endeavored to capitalize on bone's own consistently diverse loading environment to develop a novel model that would enable assessment of the influence of physiologically engendered mechanical stimuli on cortical defect repair.