A quantitative model of charge injection by ruthenium chromophores connecting femtosecond to continuous irradiance conditions.

A kinetic framework for the ultrafast photophysics of tris(2,2-bipyridine)ruthenium(II) phosphonated and methyl-phosphonated derivatives is used as a basis for modeling charge injection by ruthenium dyes into a semiconductor substrate. By including the effects of light scattering, dye diffusion, and adsorption kinetics during sample preparation and the optical response of oxidized dyes, quantitative agreement with multiple transient absorption datasets is achieved on timescales spanning femtoseconds to nanoseconds. In particular, quantitative agreement with important spectroscopic handles-the decay of an excited state absorption signal component associated with charge injection in the UV region of the spectrum and the dynamical redshift of a ∼500 nm isosbestic point-validates our kinetic model.

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation.

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe O on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe O |-carbazole|TiO |-Ru(carbene), demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.

Dye-Sensitized Nonstoichiometric Strontium Titanate Core-Shell Photocathodes for Photoelectrosynthesis Applications.

A core-shell approach that utilizes a high-surface-area conducting core and an outer semiconductor shell is exploited here to prepare p-type dye-sensitized solar energy cells that operate with a minimal applied bias. Photocathodes were prepared by coating thin films of nanocrystalline indium tin oxide with a 0.8 nm AlO seeding layer, followed by the chemical growth of nonstoichiometric strontium titanate.

Photophysical characterization of new osmium (II) photocatalysts for hydrohalic acid splitting.

Two osmium(II) photocatalysts bearing a dicationic 4,4'-bis-(trimethylaminomethyl)-2,2'-bipyridine (tmam) ligand and 2,2'-bipyridine {[Os(bpy)(tmam)]} or 4,4'-(CF)-2,2'-bipyridine {[Os((CF)bpy)(tmam)]} ancillary ligands were synthesized and characterized for application in HX splitting. Iodide titration studies in acetone solutions provided evidence for an in situ formed terionic complex with two iodide ions as evidenced by H NMR and UV-visible absorption spectroscopies, as well as by density functional theory calculations and natural bond order analysis. The photocatalyst [Os(bpy)(tmam)] was shown to be inefficient in iodide oxidation.

Ultrafast Relaxations in Ruthenium Polypyridyl Chromophores Determined by Stochastic Kinetics Simulations.

Maximizing the efficiency of solar energy conversion using dye assemblies rests on understanding where the energy goes following absorption. Transient spectroscopies in solution are useful for this purpose, and the time-resolved data are usually analyzed with a sum of exponentials. This treatment assumes that dynamic events are well separated in time, and that the resulting exponential prefactors and phenomenological lifetimes are related directly to primary physical values.

A Silicon-Based Heterojunction Integrated with a Molecular Excited State in a Water-Splitting Tandem Cell.

Semiconductor-based photocathodes with high light-absorption capability are of interest in the production of solar fuels, but many of them are limited by low efficiencies due to rapid interfacial back electron transfer. We demonstrate here that a nanowire-structured p-type Si (p-Si) electrode, surface-modified with a perylene-diimide derivative (PDI'), can undergo photoreduction of a surface-bound, water reduction catalyst toward efficient H evolution under a low applied bias. At the electrode interface, the PDI' layer converts green light into high-energy holes at its excited state for extraction of photogenerated electrons at the photoexcited p-Si.

Stabilization of Ruthenium(II) Polypyridyl Chromophores on Mesoporous TiO Electrodes: Surface Reductive Electropolymerization and Silane Chemistry.

Stabilization is a critical issue in the long term operation of dye-sensitized photoelectrosynthesis cells (DSPECs) for water splitting or CO reduction. The cells require a stable binding of the robust molecular chromophores, catalysts, and chromophore/catalyst assemblies on metal oxide semiconductor electrodes under the corresponding (photoelectro)chemical conditions. Here, an efficient stabilization strategy is presented based on functionalization of FTOTiO (mesoporous, nanostructured TiO deposited on fluorine-doped tin oxide (FTO) glass) electrodes with a vinylsilane followed by surface reductive electropolymerization of a vinyl-derivatized Ru(II) polypyridyl chromophore.

Stable Molecular Surface Modification of Nanostructured, Mesoporous Metal Oxide Photoanodes by Silane and Click Chemistry.

Binding functional molecules to nanostructured mesoporous metal oxide surfaces provides a way to derivatize metal oxide semiconductors for applications in dye-sensitized photoelectrosynthesis cells (DSPECs). The commonly used anchoring groups, phosphonates and carboxylates, are unstable as surface links to oxide surfaces at neutral and high pH, leading to rapid desorption of appended molecules. A synthetically versatile molecular attachment strategy based on initial surface modification with a silyl azide followed by click chemistry is described here.

Charge Transfer from Upconverting Nanocrystals to Semiconducting Electrodes: Optimizing Thermodynamic Outputs by Electronic Energy Transfer.

Light-harvesting inorganic nanocrystals play an important role in emerging solar energy conversion and optoelectronic devices. We describe here a strategy for a new family of photoelectrodes with upconverting nanocrystal assemblies as the photosensitizer. The assemblies consist of oleic acid-capped cadmium selenide (CdSe) nanocrystals that coordinate directly onto a layer of surface-bound, carboxylic acid-derivatized anthracenes through displacement of the oleic acid capping ligands.

A Molecular Silane-Derivatized Ru(II) Catalyst for Photoelectrochemical Water Oxidation.

Photoanodes in dye-sensitized photoelectrosynthesis cells integrate molecular chromophore/catalyst assemblies on mesoporous n-type metal oxide electrodes for light-driven water oxidation. One limitation for sustainable photoanodes is the stability of chromophore/catalyst assembly on electrode surfaces for long periods. Progress has been made in stabilizing chromophores based on atomic layer deposition, polymer dip coating, C-C cross-coupling by electropolymerization, and silane surface binding, but little progress has been made on catalyst stabilization.

Completing a Charge Transport Chain for Artificial Photosynthesis.

A ruthenium polypyridyl chromophore with electronically isolated triarylamine substituents has been synthesized that models the role of tyrosine in the electron transport chain in photosystem II. When bound to the surface of a TiO electrode, electron injection from a Ru(II) Metal-to-Ligand Charge Transfer (MLCT) excited state occurs from the complex to the electrode to give Ru(III). Subsequent rapid electron transfer from the pendant triarylamine to Ru(III) occurs with an observed rate constant of ∼10 s, which is limited by the rate of electron injection into the semiconductor.

Optical Intramolecular Electron Transfer in Opposite Directions through the Same Bridge That Follows Different Pathways.

The electrochemical and spectroscopic properties of eight bis(tridentate) cyclometalated Ru compounds covalently linked by a phenyl- or xylyl-thiophene bridge to a pendant triphenylamine (TPA) were characterized in fluid solution and immobilized on metal oxide surfaces. Upon surface immobilization, the TPA reduction potentials of the phenyl-bridged compounds exhibited large changes, ±100 mV, relative to solution-based values, yet those observed for the xylyl-bridged compounds were relatively unchanged. The highest occupied molecular orbital of the surface-immobilized compounds was associated with either TPA or Ru, enabling the study of the electron transfer in opposite directions.

A High-Valent Metal-Oxo Species Produced by Photoinduced One-Electron, Two-Proton Transfer Reactivity.

Described herein is a photochemical approach to the generation of a high-valent metal-oxo species that utilizes a chromophore or "sensitizer", a semiconducting electron acceptor, and a redox buffer that poises a catalyst's initial protonation and oxidation state. The photoexcited sensitizer injects an electron into the semiconductor and then oxidizes the catalyst whose reactivity occurs in kinetic competition with back electron transfer. Core-shell SnO/TiO semiconductor nanocrystallites inhibited charge recombination relative to TiO acceptors.

Excited-State Decay Pathways of Tris(bidentate) Cyclometalated Ruthenium(II) Compounds.

The synthesis, electrochemistry, and photophysical characterization are reported for 11 tris(bidentate) cyclometalated ruthenium(II) compounds, [Ru(N^N)(C^N)]. The electrochemical and photophysical properties were varied by the addition of substituents on the 2,2'-bipyridine, N^N, and 2-phenylpyridine, C^N, ligands with different electron-donating and -withdrawing groups. The systematic tuning of these properties offered a tremendous opportunity to investigate the origin of the rapid excited-state decay for these cyclometalated compounds and to probe the accessibility of the dissociative, ligand-field (LF) states from the metal-to-ligand charge-transfer (MLCT) excited state.

Chromophore-Catalyst Assembly for Water Oxidation Prepared by Atomic Layer Deposition.

Visible-light-driven water splitting was investigated in a dye sensitized photoelectrosynthesis cell (DSPEC) based on a photoanode with a phosphonic acid-derivatized donor-π-acceptor (D-π-A) organic chromophore, 1, and the water oxidation catalyst [Ru(bda)(4-O(CH)P(OH)-pyr)], 2, (pyr = pyridine; bda = 2,2'-bipyridine-6,6'-dicarboxylate). The photoanode was prepared by using a layering strategy beginning with the organic dye anchored to an FTO|core/shell electrode, atomic layer deposition (ALD) of a thin layer (<1 nm) of TiO, and catalyst binding through phosphonate linkage to the TiO layer. Device performance was evaluated by photocurrent measurements for core/shell photoanodes, with either SnO or nanoITO core materials, in acetate-buffered, aqueous solutions at pH 4.

Water Photo-oxidation Initiated by Surface-Bound Organic Chromophores.

Organic chromophores can be synthesized by established methods and offer an opportunity to expand overall solar spectrum utilization for dye-sensitized photoelectrosynthesis cells. However, there are complications in the use of organic chromophores arising from the instability of their oxidized forms, the inability of their oxidized forms to activate a water oxidation catalyst, or the absence of a sufficiently reducing excited state for electron injection into appropriate semiconductors. Three new triarylamine donor-acceptor organic dyes have been investigated here for visible-light-driven water oxidation.

Ultrafast Recombination Dynamics in Dye-Sensitized SnO/TiO Core/Shell Films.

Interfacial dynamics are investigated in SnO/TiO core/shell films derivatized with a Ru(II)-polypyridyl chromophore ([Ru(bpy)(4,4'-(POH)bpy)], RuP) using transient absorption methods. Electron injection from the chromophore into the TiO shell occurs within a few picoseconds after photoexcitation. Loss of the oxidized dye through recombination occurs across time scales spanning 10 orders of magnitude.

Efficient Photochemical Dihydrogen Generation Initiated by a Bimetallic Self-Quenching Mechanism.

Artificial photosynthesis relies on coupling light absorption with chemical fuel generation. A mechanistic study of visible light-driven H production from [Cp*Ir(bpy)H] (1) has revealed a new, highly efficient pathway for integrating light absorption with bond formation. The net reaction of 1 with a proton source produces H, but the rate of excited state quenching is surprisingly acid-independent and displays no observable deuterium kinetic isotopic effect.

Direct observation of light-driven, concerted electron-proton transfer.

The phenols 4-methylphenol, 4-methoxyphenol, and N-acetyl-tyrosine form hydrogen-bonded adducts with N-methyl-4, 4'-bipyridinium cation (MQ) in aqueous solution as evidenced by the appearance of low-energy, low-absorptivity features in UV-visible spectra. They are assigned to the known examples of optically induced, concerted electron-proton transfer, photoEPT. The results of ultrafast transient absorption measurements on the assembly MeOPhO-H---MQ are consistent with concerted EPT by the instantaneous appearance of spectral features for MeOPhO·---H-MQ in the transient spectra at the first observation time of 0.

Disentangling the Physical Processes Responsible for the Kinetic Complexity in Interfacial Electron Transfer of Excited Ru(II) Polypyridyl Dyes on TiO2.

Interfacial electron transfer at titanium dioxide (TiO2) is investigated for a series of surface bound ruthenium-polypyridyl dyes whose metal-to-ligand charge-transfer state (MLCT) energetics are tuned through chemical modification. The 12 complexes are of the form Ru(II)(bpy-A)(L)2(2+), where bpy-A is a bipyridine ligand functionalized with phosphonate groups for surface attachment to TiO2. Functionalization of ancillary bipyridine ligands (L) enables the potential of the excited state Ru(III/)* couple, E(+/)*, in 0.

Synthesis, Electrochemistry, and Excited-State Properties of Three Ru(II) Quaterpyridine Complexes.

The complexes [Ru(qpy)LL'](2+) (qpy = 2,2':6',2″:6″,2‴-quaterpyridine), with 1: L = acetonitrile, L'= chloride; 2: L = L'= acetonitrile; and 3: L = L'= vinylpyridine, have been prepared from [Ru(qpy) (Cl)2]. Their absorption spectra in CH3CN exhibit broad metal-to-ligand charge transfer (MLCT) absorptions arising from overlapping (1)A1 → (1)MLCT transitions. Photoluminescence is not observed at room temperature, but all three are weakly emissive in 4:1 ethanol/methanol glasses at 77 K with broad, featureless emissions observed between 600 and 1000 nm consistent with MLCT phosphorescence.

Polymer-Based Ruthenium(II) Polypyridyl Chromophores on TiO2 for Solar Energy Conversion.

A polychromophoric light-harvesting assembly featuring a polystyrene (PS) backbone with ionic carboxylate-functionalized Ru(II) polypyridyl complexes as pendant groups (PS-Ru-A) was synthesized and successfully anchored onto mesoporous structured TiO2 films (TiO2 //PS-Ru-A). Studies of the resulting TiO2 //PS-Ru-A films carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) confirmed that the ionic carboxylated Ru(II) complexes from PS-Ru-A led to the surface immobilization on the TiO2 film. Monochromatic light photocurrent spectroscopy (IPCE) and white light (AM1.

Phosphonate-Derivatized Porphyrins for Photoelectrochemical Applications.

A series of phosphonate-derivatized, high redox potential porphyrins with mesityl, pentafluorophenyl, and heptafluoropropyl meso-substituents were synthesized by acid-catalyzed condensation reactions. Ground and excited state redox potentials in the series were varied systematically with the electron-donating or electron-accepting nature of the meso-substitutents. The extent of excitation and injection by porphyrin singlet excited states surface-bound to SnO2/TiO2 core/shell metal oxide nanoparticle films varies with the excited state reduction potential, E°(')(P(+)/P*).