BTEX and heavy metals removal using pulverized waste tires in engineered fill materials.

In this study, the potential of pulverized waste tires (PWTs), either on their own or mixed with soil (well graded sand), to act as adsorptive fill materials was evaluated by conducting laboratory tests for accessing their adsorption and geotechnical properties. PWT (0, 5, 10, 15, 25, and 100 wt%) was mixed with soil to evaluate the removal of benzene, toluene, ethylbenzene, and xylene (BTEX) components and two heavy metal ions (Pb and Cu). Adsorption batch tests were performed to determine the equilibrium sorption capacity of each mixture.

Engineering Reactive Clay Systems by Ground Rubber Replacement and Polyacrylamide Treatment.

This study investigates the combined performance of ground rubber (GR), the additive, and polyacrylamide (PAM), the binder, as a sustainable solution towards ameliorating the inferior geotechnical attributes of an expansive clay. The first phase of the experimental program examined the effects of PAM concentration on the soil's mechanical properties-consistency, sediment volume attributes, compactability, unconfined compressive strength (UCS), reactivity and microstructure features. The second phase investigated the effects of GR content, with and without the optimum PAM concentration.

Effect of biodegradation on the consolidation properties of a dewatered municipal sewage sludge.

The effect of biodegradation on the consolidation characteristics of an anaerobically digested, dewatered municipal sewage sludge was studied. Maintained-load oedometer consolidation tests that included measurement of the pore fluid pressure response were conducted on moderately degraded sludge material and saturated bulk samples that had been stored under static conditions and allowed to anaerobically biodegrade further (simulating what would happen in an actual sewage sludge monofill or lagoon condition). Strongly degraded sludge material was produced after a storage period of 13 years at ambient temperatures of 5-15 degrees C, with the total volatile solids reducing from initially 70% to 55%.

Sewage sludge to landfill: some pertinent engineering properties.

More stringent controls on the quality of wastewater discharges have given rise to increasing volumes of sewage sludge for disposal, principally to land, using either land-spreading or sludge-to-landfill operations. Current sludge-to-landfill methods generally involve mixing the concentrated sludge with other solid waste in municipal landfills. However, stricter waste disposal legislation and higher landfill taxes are forcing the water industry to look for more efficient disposal strategies.

Mechanical properties of dewatered sewage sludge.

The mechanical properties of dewatered, anaerobically digested sewage sludge were determined from soil laboratory tests. The sludge material is largely composed of organic clay sized-particles, a sizable fraction of which is in an active state of biological digestion which can continue over many years under field conditions. Moderately digested sludge material was found to have a typical specific gravity of solids value of 1.