Photoswitchable Arylazopyrazole Surfactants at the Water-Air Interface: A Microscopic Perspective.

Surfactants play an important role in modifying the properties of water-air interfaces. Here, we combine information from molecular dynamics simulations, surface tensiometry, and vibrational sum-frequency generation spectroscopy to study the interfacial behavior of photoswitchable arylazopyrazole (AAP) surfactants. This combination of the experimental techniques allows a direct relation between surface tension and surface concentration rather than just the bulk concentration.

Photo-induced drug release at interfaces with arylazopyrazoles.

Smart responsive materials have spurred the progress in high-precision drug delivery. Enormous attention has been given to characterizing drug release in bulk aqueous solutions, however, aqueous-hydrophobic interfaces are vital components of biological systems which serve as the point of entry into cells. These interfaces are involved in many key biomolecular interactions, and while the potential for drug molecules to adsorb to these interfaces is recognized, their specific role in the context of drug release remains largely unexplored.

Photoresponsive arylazopyrazole surfactant/PDADMAC mixtures: reversible control of bulk and interfacial properties.

In many applications of polyelectrolyte/surfactant (P/S) mixtures, it is difficult to fine-tune them after mixing the components without changing the sample composition, pH or the ionic strength. Here we report on a new approach where we use photoswitchable surfactants to enable drastic changes in both the bulk and interfacial properties. Poly(diallyldimethylammonium chloride) (PDADMAC) mixtures with three alkyl-arylazopyrazole butyl sulfonates (CAAP) with -H, -butyl and -octyl tails are applied and / photoisomerization of the surfactants is used to cause substantially different hydrophobic interactions between the surfactants and PDADMAC.

Charge Regulation at the Nanoscale as Evidenced from Light-Responsive Nanoemulsions.

Emulsions are indispensable in everyday life, and the demand for emulsions' diversity and control of properties is therefore substantial. As emulsions possess a high internal surface area, an understanding of the oil/water (o/w) interfaces at the molecular level is fundamental but often impaired by experimental limitations to probe emulsion interfaces in situ. Here, we have used light-responsive surfactants (butyl-AAP) that can photoisomerize between and isomers by visible and UV light irradiation to tune the emulsion interfaces.

Tailored Monolayers of N-Heterocyclic Carbenes by Kinetic Control.

Despite the substantial success of N-heterocyclic carbenes (NHCs) as stable and versatile surface modification ligands, their use in nanoscale applications beyond chemistry is still hampered by the failure to control the carbene binding mode, which complicates the fabrication of monolayers with the desired physicochemical properties. Here, we applied vibrational sum-frequency generation spectroscopy to conduct a pseudokinetic surface analysis of NHC monolayers on Au thin films under ambient conditions. We observe for two frequently used carbene structures that their binding mode is highly dynamic and changes with the adsorption time.

Photo-Responsive Control of Adsorption and Structure Formation at the Air-Water Interface with Arylazopyrazoles.

Smart interfaces that are responsive to external triggers such as light are of great interest for the development of responsive or adaptive materials and interfaces. Using alkyl-arylazopyrazole butyl sulfonate surfactants (alkyl-AAP) that can undergo / photoisomerization when irradiated with green () and UV () lights, we demonstrate through a combination of experiments and computer simulations that there can be surprisingly large changes in surface tension and in the molecular structure and order at air-water interfaces. Surface tensiometry, vibrational sum-frequency generation (SFG) spectroscopy, and neutron reflectometry (NR) are applied to the study of custom-synthesized AAP surfactants with octyl- and H-terminal groups at air-water interfaces as a function of their bulk concentration and / configuration.

Influence of interfacial water and cations on the oxidation of CO at the platinum/ionic liquid interface.

CO oxidation is fundamental to the development of new catalyst materials for fuel cells and key for complete oxidation of small alcohols like methanol or ethanol on Pt catalysts. So far, room-temperature ionic liquids (RTIL) have been used to modify the selectivity and activity in electrocatalysis. In order to understand the mechanism of CO oxidation in RTIL in more detail we have investigated this reaction at the Pt(111)/1-butyl-3-methylimidazolium trifluorosulfonylimide [BMIM][NTf] electrode/electrolyte interface as a function of HO concentration and electrode potential with sum-frequency generation (SFG) spectroscopy and infrared absorption spectroscopy (IRAS).

Dynamic molecular switches with hysteretic negative differential conductance emulating synaptic behaviour.

To realize molecular-scale electrical operations beyond the von Neumann bottleneck, new types of multifunctional switches are needed that mimic self-learning or neuromorphic computing by dynamically toggling between multiple operations that depend on their past. Here, we report a molecule that switches from high to low conductance states with massive negative memristive behaviour that depends on the drive speed and number of past switching events, with all the measurements fully modelled using atomistic and analytical models. This dynamic molecular switch emulates synaptic behavior and Pavlovian learning, all within a 2.

Surface Properties of Saponin-Chitosan Mixtures.

The surface properties of saponin and saponin-chitosan mixtures were analysed as a function of their bulk mixing ratio using vibrational sum-frequency generation (SFG), surface tensiometry and dilational rheology measurements. Our experiments show that saponin-chitosan mixtures present some remarkable properties, such as a strong amphiphilicity of the saponin and high dilational viscoelasticity. We believe this points to the presence of chitosan in the adsorption layer, despite its complete lack of surface activity.

Adsorption of CTAB on Sapphire- at High pH: Surface and Zeta Potential Measurements Combined with Sum-Frequency and Second-Harmonic Generation.

The adsorption of cetyltrimethylammonium bromide (CTABr) on sapphire- surfaces was studied at pH 10 below the surfactants' critical micelle concentration. The evolution of interfacial potentials as a function of CTAB concentration was characterized by surface and zeta potential measurements and complemented by molecular dynamic (MD) simulations as well as by second-harmonic (SHG) and vibrational sum-frequency generation (SFG) spectroscopy. The changes in interfacial potentials suggest that the negative interfacial charge due to deprotonated surface aluminols groups is neutralized and can be even overcompensated by the presence of CTA cations at the interface.

Dynamic Wetting of Photoresponsive Arylazopyrazole Monolayers is Controlled by the Molecular Kinetics of the Monolayer.

Smart surfaces that can change their wettability on demand are interesting for applications such as self-cleaning surfaces or lab-on-a-chip devices. We have synthesized arylazopyrazole (AAP) phosphonic acids as a new class of photoswitchable molecules for functionalization of aluminum oxide surfaces. AAP monolayers were deposited on α-AlO(0001) and showed reversible / photoswitching that can trigger contact angle changes of up to ∼10°.

Responsive Material and Interfacial Properties through Remote Control of Polyelectrolyte-Surfactant Mixtures.

Polyelectrolyte/surfactant (P/S) mixtures find many applications but are static in nature and cannot be reversibly reconfigured through the application of external stimuli. Using a new type of photoswitchable surfactants, we use light to trigger property changes in mixtures of an anionic polyelectrolyte with a cationic photoswitch such as electrophoretic mobilities, particle size, as well as their interfacial structure and their ability to stabilize aqueous foam. For that, we show that prevailing hydrophobic intermolecular interactions can be remotely controlled between poly(sodium styrene sulfonate) (PSS) and arylazopyrazole tetraethylammonium bromide (AAP-TB).

Nanoscale Effects on the Surfactant Adsorption and Interface Charging in Hexadecane/Water Emulsions.

Nanoscale properties at interfaces play a key role in the colloidal stability of emulsions and other soft matter materials where physical properties need to be controlled from the nano to macroscopically visible length scales. Our molecular level understanding of oil-water interfaces arises mostly from results at extended interfaces and the common view that emulsions are stabilized by a large number of surfactant molecules at the droplet's interface which, however, has been recently challenged. In this work, we show that the particle size and the curvature of oil droplets at the nanoscale is of great importance for the interface adsorption of dodecyl sulfate surfactants and possible counterion condensation at the charged hexadecane-water interface.

pH effects on the molecular structure and charging state of β-Escin biosurfactants at the air-water interface.

Saponins like β-escin exhibit an unusually high surface activity paired with a remarkable surface rheology which makes them as biosurfactants highly interesting for applications in soft matter colloids and at interfaces. We have applied vibrational sum-frequency generation (SFG) to study β-escin adsorption layers at the air-water interface as a function of electrolyte pH and compare the results from SFG spectroscopy to complementary experiments that have addressed the surface tension and the surface dilational rheology. SFG spectra of β-escin modified air-water interfaces demonstrate that the SFG intensity of OH stretching vibrations from interfacial water molecules is a function of pH and dramatically increases when the pH is increased from acidic to basic conditions and reaches a plateau at a solution pH of > 6.

Memory effects in polymer brushes showing co-nonsolvency effects.

Densely packed polymer chains grafted to a substrate, especially polymer brushes, have been studied intensively. Of special interest are systems that react to changes in external conditions or"remember" previous conditions. With this focus, we explore the properties of PNiPAAm brushes and relate published work to own results.

Light-induced switching of polymer-surfactant interactions enables controlled polymer thermoresponsive behaviour.

Hydroxypropyl cellulose (HPC) and arylazopyrazole (AAP) mixtures can be remotely controlled by light and temperature. We show that the hydrophobic interactions between HPC polymers with AAP surfactants can be drastically changed by changing the surfactants configuration through E/Z photo-isomerization. E-AAP interacts strongly with HPC which causes a dramatic increase of the critical temperature Tc of the polymers' phase transition and a loss of the coil-to-globule transition, while the hydrophobic interactions of HPC with Z-AAP are drastically reduced.

A cyclodextrin surfactant for stable emulsions with an accessible cavity for host-guest complexation.

Although cyclodextrins (CDs) have been used as additives to small molecule surfactants, there are only a few examples of this cyclic oligosaccharide being used as a surfactant template. Herein, we present a novel ionic β-CD derivative that shows significant surface activity and stabilizes oil-in-water emulsions prepared with hexadecane as a model oil. The macrocyclic surfactant strongly reduces the oil-water surface tension with increasing concentration and shows a critical micelle concentration (CMC) around 5 mM.

Potential-Induced Adsorption and Structuring of Water at the Pt(111) Electrode Surface in Contact with an Ionic Liquid.

Water adsorption is important in many fields from surface electrochemistry to electrocatalysis, where molecular-level information is much needed in order to gain a detailed understanding of the role of interfacial water. Here we report on water at Pt(111) surfaces in contact with an [EIMIM][BF] ionic liquid, which was spectroscopically resolved by using sum-frequency generation (SFG). O-H modes are used to study water adsorption and water structure as a function of electrode potential, while the analysis of C-H modes is used to infer orientational changes of [EMIM] cations at the interface.

Photo-Switchable Surfactants for Responsive Air-Water Interfaces: Azo versus Arylazopyrazole Amphiphiles.

Arylazopyrazoles (AAPs) as substitutes for azobenzene derivatives have gained considerable attention due to their superior properties offering / photoisomerization with high yield. In order to compare and quantify their performance, azobenzene triethylammonium (Azo-TB) and arylazopyrazole triethylammonium (AAP-TB) bromides were synthesized and characterized in the bulk (water) using NMR and UV/Vis spectroscopy. At the air-water interface, complementary information from vibrational sum-frequency generation (SFG) spectroscopy and neutron reflectometry (NR) has revealed the effects of isomerization in great detail.

Unexpected monolayer-to-bilayer transition of arylazopyrazole surfactants facilitates superior photo-control of fluid interfaces and colloids.

Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed -butyl-arylazopyrazole butyl sulfonate (butyl-AAP-CS) surfactant that can change its structure at the air-water interface by / photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δ = 27 mN m) and surface excess (Δ > 2.

Spiropyran Sulfonates for Photo- and pH-Responsive Air-Water Interfaces and Aqueous Foam.

Responsive foams and interfaces are interesting building blocks for active materials that respond and adapt to external stimuli. We have used the photochromic reaction of a spiropyran sulfonate surfactant to render interfacial, rising bubbles as well as foaming properties active to light stimuli. In order to address the air-water interface on a molecular level, we have applied sum-frequency generation (SFG) spectroscopy which has provided qualitative information on the surface excess and the interfacial charging state as a function of light irradiation and solution pH.

Specific Ion Effects of Dodecyl Sulfate Surfactants with Alkali Ions at the Air-Water Interface.

The influence of Li, Na and Cs cations on the surface excess and structure of dodecyl sulfate (DS) anions at the air-water interface was investigated with the vibrational sum-frequency generation (SFG) and surface tensiometry. Particularly, we have addressed the change in amplitude and frequency of the symmetric S-O stretching vibrations as a function of electrolyte and DS concentration in the presence of Li, Na and Cs cations. For the Li and Na ions, we show that the resonance frequency is shifted noticeably from 1055 cm to 1063 cm as a function of the surfactants' surfaces excess, which we attribute to the vibrational Stark effect within the static electric field at the air-water interface.

Specific Ion Effects of Trivalent Cations on the Structure and Charging State of β-Lactoglobulin Adsorption Layers.

The properties of proteins at interfaces are important to many processes as well as in soft matter materials such as aqueous foam. Particularly, the protein interfacial behavior is strongly linked to different factors like the solution pH or the presence of electrolytes. Here, the nature of the electrolyte ions can significantly modify the interfacial properties of proteins.

CTAB/polystyrene sulfonate mixtures at air-water interfaces: effects of alkyl chain length on surface activity and charging state.

Binding and phase behavior of oppositely charged polyelectrolytes and surfactants with different chain lengths were studied in aqueous bulk solutions and at air-water interfaces. In particular, we have investigated the polyanion poly(sodium 4-styrenesulfonate) (NaPSS) and the cationic surfactants dodecyltrimethylammonium bromide (CTAB), tetradecyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium bromide (CTAB). In order to reveal the surfactant/polyelectrolyte binding, aggregation and phase separation of the mixtures, we have varied the NaPSS concentration systematically and have kept the surfactant concentration fixed at 1/6 of the respective critical micelle concentration.

Hydroxypropyl cellulose as a green polymer for thermo-responsive aqueous foams.

Hydroxypropyl cellulose (HPC) is a surface active polymer that can change its solubility as a function of temperature. This makes HPC interesting for responsive foams, where macroscopic properties need to be reversibly changed on demand. Analysis of aqueous HPC foams as a function of temperature showed a moderate decrease in foam half-life time from 9000 to 4000 s, when the temperature was increased.