Antimicrobial Zn-Carboxymethyl Chitosan Cryogel for Controlled Loading and Release of Ciprofloxacin via Coordination Bonds.

The local application of broad-spectrum antibiotics via polymeric drug delivery systems is a promising alternative to their systemic administration in wound healing, prevention and treatment of infections associated with surgical implants. However, low and poorly controlled loading efficiency and 100% burst release are common problems for the materials with weak physical interaction between antibiotics and polymeric matrices. Here, we report a new multifunctional carboxymethyl chitosan (CMC) cryogel, which efficiently prevents bacterial adhesion to the surface, kills bacteria in the solution via controlled release of ciprofloxacin (CIP), and promotes fibroblast proliferation.

Tuning Mechanical Properties, Swelling, and Enzymatic Degradation of Chitosan Cryogels Using Diglycidyl Ethers of Glycols with Different Chain Length as Cross-Linkers.

Cross-linking chitosan at room and subzero temperature using a series of diglycidyl ethers of glycols (DEs)-ethylene glycol (EGDE), 1,4-butanediol (BDDE), and poly(ethylene glycol) (PEGDE) has been investigated to demonstrate that DEs can be a more powerful alternative to glutaraldehyde (GA) for fabrication of biocompatible chitosan cryogels with tunable properties. Gelation of chitosan with DEs was significantly slower than with GA, allowing formation of cryogels with larger pores and higher permeability, more suitable for flow-through applications and cell culturing. Increased hydration of the cross-links with increased DE chain length weakened intermolecular hydrogen bonding in chitosan and improved cryogel elasticity.

Radioactivity of anthropogenic and natural radionuclides in marine sediments of the Chaun Bay, East Siberian Sea.

Natural radioactive isotopes serve as a useful proxy of geological and geochemical processes in marine environment, while radiocesium serves as an indicator of man-made contamination. Monitoring of natural and anthropogenic radioactivity under conditions of the climate changes in the Arctic region is of high importance in investigations of this natural system. For the first time, we report the data on spatial distribution of natural (Th, Ra, K) and anthropogenic (Cs) radionuclide activities in the marine sediments from Chaun Bay (East Siberian Sea).

Extended Rate Constants Distribution (RCD) Model for Sorption in Heterogeneous Systems: 4. Kinetics of Metal Ions Sorption in the Presence of Complexing Agents-Application to Cu(II) Sorption on Polyethyleneimine Cryogel from Acetate and Tartrate Solutions.

Here, we report a new version of the extended Rate Constants Distribution (RCD) model for metal ion sorption, which includes complex-formation equilibria. With the RCD-complex model, one can predict sorbent performance in the presence of complexing agents using data on metal ion sorption from ligand-free solutions and a set of coefficients for sorption rate constants of different ionic species. The RCD-complex model was applied to breakthrough curves of Cu(II) sorption from acetate and tartrate solutions on polyethyleneimine (PEI) monolith cryogel at different flow rates and ionic speciation.

Fe Mössbauer and DFT study of the electronic and spatial structures of the iron(II) (pseudo)clathrochelates: the effect of ligand field strength.

Combined experimental Fe Mössbauer and theoretical DFT study of a series of iron(II)-centered (pseudo)macrobicyclic analogs and homologs was performed. The field strength of the corresponding (pseudo)encapsulating ligand was found to affect both the spin state of a caged iron(II) ion and the electron density at its nucleus. In a row of the iron(II) tris-dioximates, passing from the non-macrocyclic complex to its monocapped pseudomacrobicyclic analog caused an increase both in the ligand field strength and in the electron density at the Fe ion, and, therefore, a decrease in the isomer shift (IS) value (so-called "semiclathrochelate effect").

Chitosan Cryogels Cross-Linked with 1,1,3-Triglycidyloxypropane: Mechanical Properties and Cytotoxicity for Cancer Cell 3D Cultures.

Here, we have presented a new method of 1,1,3-triglycidyloxypropane (TGP) synthesis and investigated how cross-linker branching affects mechanical properties and cytotoxicity of chitosan scaffolds in comparison with those cross-linked using diglycidyl ethers of 1,4-butandiol (BDDGE) and poly(ethylene glycol) (PEGDGE). We have demonstrated that TGP is an efficient cross-linker for chitosan at a subzero temperature at TGP:chitosan molar ratios from 1:1 to 1:20. Although the elasticity of chitosan scaffolds increased in the following order of the cross-linkers PEGDGE > TGP > BDDGE, TGP provided cryogels with the highest compressive strength.

Light Harvesting Nanoprobe for Trace Detection of Hg in Water.

The continuously increasing flow of toxic heavy metals to the environment due to intensive industrial activity and tightening requirements with regard to the content of metal ions in drinking and discharged waters urges the development of affordable and sensitive devices to the field control of pollutants. Here, we report a new thiated Rhodamine-lactam probe for Hg detection and demonstrate how its sensitivity can be increased via the incorporation of the probe molecules into the optically transparent siloxane-acrylate coatings on polymethyl methacrylate and, alternatively, into the water-dispersible light-harvesting FRET nanoparticles (NPs), in which dye cations are separated by fluorinated tetraphenylborate anions. We have shown that the optimization of the FRET NPs composition had allowed it to reach the antenna effect of ~300 and fabricate "off/on" sensor for Hg ion determination in aqueous solutions with the detection limit of ~100 pM, which is far below the maximum permissible concentration (MPC) of mercury in drinking water recommended by the World Health Organization.

Removal of Cs-137 Radionuclide by Resorcinol-Formaldehyde Ion-Exchange Resins from Solutions Simulating Real Liquid Radioactive Waste.

The efficiency of the removal of Cs-137 radionuclides with porous and non-porous resorcinol−formaldehyde resins from alkaline solutions simulating the composition of real liquid radioactive waste (LRW) streams has been evaluated. Resins were synthesized through the polycondensation of resorcinol and formaldehyde in an alkaline medium at a molar ratio of 1.8/2.

Polyethylenimine as a Non-Innocent Ligand for Hexacyanoferrates Immobilization.

To understand how polyethyleneimine (PEI), as a ligand, affects structure and properties of the transition metals hexacyanoferrates (HCFs) immobilized in cross-linked PEI matrix, we have synthesized Cu(II), Zn(II), and Fe(III) HCFs via successive ion-exchange reactions with metal salts and K[Fe(CN)] or K[Fe(CN)]. The structure and properties of the obtained materials in comparison with the crystalline HCF analogs were investigated with FT-IR, Mössbauer, and UV-Vis spectroscopy. Complete reduction of Fe(III) to Fe(II) by PEI in HCF(III) was confirmed.

Chitosan versus Carboxymethyl Chitosan Cryogels: Bacterial Colonization, Human Embryonic Kidney 293T Cell Culturing and Co-Culturing.

The potential of chitosan and carboxymethyl chitosan (CMC) cryogels cross-linked with diglycidyl ether of 1,4-butandiol (BDDGE) and poly(ethylene glycol) (PEGDGE) have been compared in terms of 3D culturing HEK-293T cell line and preventing the bacterial colonization of the scaffolds. The first attempts to apply cryogels for the 3D co-culturing of bacteria and human cells have been undertaken toward the development of new models of host-pathogen interactions and bioimplant-associated infections. Using a combination of scanning electron microscopy, confocal laser scanning microscopy, and flow cytometry, we have demonstrated that CMC cryogels provided microenvironment stimulating cell-cell interactions and the growth of tightly packed multicellular spheroids, while cell-substrate interactions dominated in both chitosan cryogels, despite a significant difference in swelling capacities and Young's modulus of BDDGE- and PEGDGE-cross-linked scaffolds.

FRET pumping of rhodamine-based probe in light-harvesting nanoparticles for highly sensitive detection of Cu.

In this work we presented novel strategy for increasing the performance of popular fluorescent probes on the basis of rhodamine-lactam platform. This strategy is based on the incorporation of probe molecules into the light-harvesting nanoparticles to pump modulated optical signal by Förster resonant energy transfer. Using the commercially available Cu probe as a reference chemical, we have developed an efficient approach to significantly improve its sensing performance.

Sponge-like Scaffolds for Colorectal Cancer 3D Models: Substrate-Driven Difference in Micro-Tumors Morphology.

Macroporous scaffolds (cryogels) for the 3D cell culturing of colorectal cancer micro-tumors have been fabricated by cross-linking chitosan and carboxymethyl chitosan (CMC) with 1,4-butandiol diglycidyl ether (BDDGE) under subzero temperature. Due to the different intrinsic properties and reactivity of CMC and chitosan under the same cross-linking conditions, Young's moduli and swelling of the permeable for HCT 116 cells cryogels varied in the broad range 3-41 kPa and 3500-6000%, respectively. We have demonstrated that the morphology of micro-tumors can be controlled via selection of the polymer for the scaffold fabrication.

Chitosan Cross-Linking with Acetaldehyde Acetals.

Here we demonstrate the possibility of using acyclic diethylacetal of acetaldehyde (ADA) with low cytotoxicity for the fabrication of hydrogels via Schiff bases formation between chitosan and acetaldehyde generated in situ from acetals in chitosan acetate solution. This approach is more convenient than a direct reaction between chitosan and acetaldehyde due to the better commercial availability and higher boiling point of the acetals. Rheological data confirmed the formation of intermolecular bonds in chitosan solution after the addition of acetaldehyde diethyl acetal at an equimolar NH: acetal ratio.

Stimuli-Responsive Dual Cross-Linked -Carboxyethylchitosan Hydrogels with Tunable Dissolution Rate.

Here, we discuss the applicability of (methylenebis(salicylaldehyde)-MbSA) for the fabrication of the stimuli-responsive -carboxyethylchitosan (CEC) hydrogels with a tunable dissolution rate under physiological conditions. In comparison with non-covalent salicylimine hydrogels, MbSA cross-linking via covalent bis('imine clip') and non-covalent hydrophobic interactions allowed the fabrication of hydrogels with storage moduli > 1 kPa at ten-fold lower aldehyde/CEC molar ratio with the preservation of pH- and amino-acid responsive behavior. Although MbSA-cross-linked CEC hydrogels were stable at neutral and weakly alkaline pH, their disassembly in cell growth medium (Dulbecco's modified Eagle's medium, DMEM) under physiological conditions was feasible due to transimination reaction with amino acids contained in DMEM.

Dataset on pore water composition and grain size properties of bottom sediments and subsea permafrost from the Buor-Khaya Bay (Laptev Sea).

The article presents a dataset on ionic composition of pore water and grain size properties of 105 samples of bottom sediments and subsea permafrost from three sediment cores obtained during polar expeditions in the Buor-Khaya Bay in 2014-2015. Collection sites are located southeast of the Lena Delta near the Bykovsky Peninsula at the Buor-Khaya Bay. In this data article, the concentration of sodium, potassium, calcium, and magnesium cations, chlorides and sulphates in water extracts from sediments, as well as grain size characteristics, are presented.

Carboxyalkylchitosan-based hydrogels with "imine clip": Enhanced stability and amino acids-induced disassembly under physiological conditions.

Here we report on the properties of hydrogels of carboxyalkylchitosans-salicylimines depending on the salicylaldehyde (SA) grafting density, type of carboxyalkyl substitution, pH, and presence of amino acids. The mechanism of SA grafting has been investigated using C NMR and FT-IR spectroscopy and elemental analysis. We have found that, despite lower SA grafting density to carboxyalkylchitosans, gelation in these solutions occurred at much lower SA:polymer molar ratios than for chitosan-salicylimines, being the highest for a N-carboxyethylchitosan with a medium substitution degree.

Hydrothermal oxidation of pre-dissolved resorcinol-formaldehyde resins as a new approach to safe processing of spent cesium-selective organic ion-exchangers.

Here we report a new approach to predisposal processing of spent resorcinol-formaldehyde resins (RFR) selective to cesium radionuclides via dissolution and hydrothermal oxidation (HTO) with the mineralization efficiency above 85%. Using a combination of potentiometric and colloid titration, we have shown that dissolution of RFR by consecutive treatment with nitric acid and sodium hydroxide solutions at optimal concentrations of 3-5 mol/L and 1 mol/L, respectively, yields colloid solutions of partially depolymerized and oxidized RFR. The efficiency of HTO of resorcinol and RFR solutions with hydrogen peroxide was investigated in a flow-type stainless steel reactor in the temperature range 165-250 °С and at linear flow rates of 1-3 cm/min.

Composite Zn(II) Ferrocyanide/Polyethylenimine Cryogels for Point-of-Use Selective Removal of Cs-137 Radionuclides.

The feasibility of several approaches to the fabrication of monolith composite cryogels containing transition-metal ferrocyanides for Cs ion uptake has been evaluated. Although in the series of investigated metal ion precursors (Cu(II), Zn(II), Ni(II), and Co(II)), in situ formation of the sorption active phase in polyethyleneimine (PEI) cryogel was feasible only in the case of Zn(II) ferrocyanide, this approach has shown significant advantages over the immobilization of ex situ synthesized ferrocyanide nanoparticles. Nanoparticles of the mixed ferrocyanide ZnK[Fe(CN)] formed in situ had an average size of 516 ± 146 nm and were homogeneously distributed in the monolith located at the polymer surface rather than embedded in the matrix.

Rational Design of Polyamine-Based Cryogels for Metal Ion Sorption.

Here we report the method of fabrication of supermacroporous monolith sorbents (cryogels) via covalent cross-linking of polyallylamine (PAA) with diglycidyl ether of 1,4-butandiol. Using comparative analysis of the permeability and sorption performance of the obtained PAA cryogels and earlier developed polyethyleneimine (PEI) cryogels, we have demonstrated the advantages and disadvantages of these polymers as sorbents of heavy metal ions (Cu(II), Zn(II), Cd(II), and Ni(II)) in fixed-bed applications and as supermacroporous matrices for the fabrication of composite cryogels containing copper ferrocyanide (CuFCN) for cesium ion sorption. Applying the rate constant distribution (RCD) model to the kinetic curves of Cu(II) ion sorption on PAA and PEI cryogels, we have elucidated the difference in sorption/desorption rates and affinity constants of these materials and showed that physical sorption contributed to the Cu(II) uptake by PAA, but not to that by PEI cryogels.

Extended Rate Constants Distribution (RCD) Model for Sorption in Heterogeneous Systems: 2. Importance of Diffusion Limitations for Sorption Kinetics on Cryogels in Batch.

Here we address the problem of what we can expect from investigations of sorption kinetics on cryogel beads in batch. Does macroporosity of beads indeed help eliminate diffusion limitations under static sorption conditions? Are sorption rate constants calculated using phenomenological kinetic models helpful for predicting sorption properties under dynamic conditions? Applying the rate constants distribution (RCD) model to kinetic curves of Cu(II) ions sorption on polyethyleneimine (PEI) cryogel and gel beads and fines, we have shown that diffusion limitations in highly swollen beads are very important and result in at least ten-fold underestimation of the sorption rate constants. To account for intraparticle diffusion, we have developed the RCD-diffusion model, which yields "intrinsic" kinetic parameters for the sorbents, even if diffusion limitations were important in kinetic experiments.

Ultrasensitive SERS-Based Plasmonic Sensor with Analyte Enrichment System Produced by Direct Laser Writing.

We report an easy-to-implement device for surface-enhanced Raman scattering (SERS)-based detection of various analytes dissolved in water droplets at trace concentrations. The device combines an analyte-enrichment system and SERS-active sensor site, both produced via inexpensive and high-performance direct femtosecond (fs)-laser printing. Fabricated on a surface of water-repellent polytetrafluoroethylene substrate as an arrangement of micropillars, the analyte-enrichment system supports evaporating water droplet in the Cassie-Baxter superhydrophobic state, thus ensuring delivery of the dissolved analyte molecules towards the hydrophilic SERS-active site.

Ultratrace Nitroaromatic Vapor Detection via Surface-Enhanced Fluorescence on Carbazole-Terminated Black Silicon.

Detection of nitroaromatic compounds (NACs) is an important applied task for environmental monitoring, medical diagnostics, and forensic analysis. However, detection of NAC vapors is challenging owing to their low vapor pressure and relatively weak sensitivity of the existing detection techniques. Here, we propose a novel concept to design fluorescence (FL) detection platforms based on chemical functionalization of nanotextured dielectric surfaces exhibiting resonant light absorption, trapping, and localization effects.

Ligand-assisted synthesis and cytotoxicity of ZnSe quantum dots stabilized by N-(2-carboxyethyl)chitosans.

Here we report a green synthesis of ZnSe quantum dots (QDs) in aqueous solution of polyampholyte chitosan derivative - N-(2-carboxyethyl)chitosan (CEC) with substitution degrees (DS) from 0.7 to 1.3 and molecular weight (MW) of 40 kDa and 150 kDa.

SiGe nanoantennas with a tailored Raman response and light-to-heat conversion for advanced sensing applications.

Active light-emitting all-dielectric nanoantennas recently have demonstrated great potential as highly efficient nanoscale light sources owing to their strong luminescent and Raman responses. However, their large-scale fabrication faces a number of problems related to productivity limits of existing lithography techniques. Thus, high-throughput fabrication strategies allowing in a facile way to tailor of the nanoantenna emission and thermal properties in the process of their fabrication are highly desirable for various applications.

New Chitosan/Iron Oxide Composites: Fabrication and Application for Removal of Sr Radionuclide from Aqueous Solutions.

Here, we discuss the fabrication and problems of application of chitosan-based composite materials for the removal of hazardous metal ions from tap water and wastewater. The chitosan-based composites containing iron oxides for the uptake of Sr ions were fabricated via a co-precipitation method with variation of the iron/chitosan ratio and pH of the medium. The morphology and composition of the fabricated sorbents were characterized using scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray diffraction (XRD) analysis.