Recovery of purple non-sulfur bacteria-mediated single-cell protein from domestic wastewater in two-stage treatment using high rate digester and raceway pond.

Wastewater resources can be used to produce microbial protein for animal feed or organic fertiliser, conserving food chain resources. This investigation hasemployed thefermented sewage to photoheterotrophically grown purple non-sulfur bacteria (PNSB) in a 2.5 m pilot-scaleraceway-pond with infrared light to produce proteinaceous biomass.

Enhancing electrokinetics and desalination efficiency through catalysts and electrode modifications in microbial desalination cells.

Microbial desalination cells (MDCs) are considered as a sustainable technology for water desalination, wastewater treatment, and power generation. However, this neoteric technology suffers from different challenges, including sluggish oxygen reduction reaction and poor electron transfer from microbes to electrodes, ultimately leading to less power generation and desalination efficiency. This review delves into the intricate roles of both abiotic and biocatalysts in enhancing performance of MDCs through ion removal and charge transfer mechanisms.

Co-pyrolysis of plastic waste and eucalyptus waste wood for fuel pellets production: A study of fuel, mechanical, and combustion characteristics under varying binder proportion.

The study explores the effect of varying molasses proportions as a binder on the characteristics of densified char obtained through the slow co-pyrolysis of plastic waste and Eucalyptus wood waste (Waste low-density polyethylene - Eucalyptus wood (WLDPE-EW) and Waste Polystyrene - Eucalyptus wood (WPS-EW)). Pyrolysis was conducted at 500 °C with a residence time of 120 min, employing plastic to wood waste ratios of 1:2 and 1:3 (w/w). The focus was on how varying the proportion of molasses (10-30 %), influences the physical and combustion properties of the resulting biofuel pellets.

PDA-FeO decorated carbon felt anode enhancing electrochemical performance of microbial fuel cells: Effect of electrode materials on electroactive biofilm.

Anode modification is an effective strategy for enhancing the electrochemical performance of microbial fuel cell (MFC). However, the impacts of the modified materials on anode biofilm development during MFC operation have been less studied. We prepared a novel PDA-FeO-CF composite anode by coating original carbon felt anode (CF) with polydopamine (PDA) and FeO nanoparticles.

Simultaneous ammonia and organics degradation from municipal landfill leachate by electrochemical oxidation.

The two primary issues for wide implementation of the electrochemical oxidation of wastewater are the significant cost of electrode and high energy consumption. On the other side, conventional biological processes and membrane technology have several drawbacks for recalcitrant landfill leachate (LL) treatment. To address these issues, graphite/PbO anode was used to treat medium to mature age (biodegradability index, 5-day biochemical oxygen demand/chemical oxygen demand: 0.

Effect of solution chemistry on the sedimentation, dissolution, and aggregation of the bimetallic Fe/Cu nanoparticles pre- and post-grafted with carboxymethyl cellulose.

The suitability of iron-based nanomaterials or composites for in-situ remediation hinges on their physicochemical stability. Introducing surface modifications like metal doping or polymer grafting can regulate interparticle forces, influencing particle stability. Thus, probing how grafting methods (i.

From slag to green: Aided-phytoremediation as a sustainable tool to rehabilitate land contaminated by steel slag and assessment of CO sequestration.

Steel slag (SS) has many applications, but its immediate reuse is not possible due to its inherent swelling potential and presence of toxic metals. Therefore, it can only be used after the aging process, which can be either natural or artificial. While few large-scale steel plants afford artificial aging, many small-scale ones opt for natural aging through stockpiling of SS.

Progress and perspectives on carbon-based materials for adsorptive removal and photocatalytic degradation of perfluoroalkyl and polyfluoroalkyl substances (PFAS).

Per- and polyfluoroalkyl substances (PFAS) (also known as 'forever chemicals') have emerged as trace pollutants of global concern, attributing to their persistent and bio-accumulative nature, pervasive distribution, and adverse public health and environmental impacts. The unregulated discharge of PFAS into aquatic environments represents a prominent threat to the wellbeing of humans and marine biota, thereby exhorting unprecedented action to tackle PFAS contamination. Indeed, several noteworthy technologies intending to remove PFAS from environmental compartments have been intensively evaluated in recent years.

Synthesis and commercialization of bioplastics: Organic waste as a sustainable feedstock.

Substituting synthetic plastics with bioplastics, primarily due to their inherent biodegradable properties, represents a highly effective strategy to address the current global issue of plastic waste accumulation in the environment. Advances in bioplastic research have led to the development of materials with improved properties, enabling their use in a wide range of applications in major commercial sectors. Bioplastics are derived from various natural sources such as plants, animals, and microorganisms.

Life cycle assessment of fermentative production of lactic acid from bread waste based on process modelling using pinch technology.

Bread waste (BW), a rich source of fermentable carbohydrates, has the potential to be a sustainable feedstock for the production of lactic acid (LA). In our previous work, the LA concentration of 155.4 g/L was achieved from BW via enzymatic hydrolysis, which was followed by a techno-economic analysis of the bioprocess.

Composite of graphitic carbon nitride and TiO as photo-electro-catalyst in microbial fuel cell.

The widespread application of surfactants and their subsequent discharge in the receiving water bodies is a very common issue in developing countries. In the present investigation, a composite of graphitic carbon nitride (GCN) and TiO was used as a photo-electro-catalyst in a microbial fuel cell (MFC)-based hybrid system for bio-electricity production and simultaneous pollutant removal (organic matter and sodium dodecyl sulphate, SDS). The GCN: TiO composite with a ratio of 70:30 (by wt.

Effective method for upcycling construction and demolition waste into concrete: A life cycle approach.

Different property enhancement techniques have already been established to support upcycling of construction and demolition waste as aggregate in concrete. However, the most suitable and sustainable method is still unknown. Quality improvement of recycled coarse aggregate (RCA) after any treatment method and its environmental impact is estimated using life cycle analysis (LCA).

Life Cycle Assessment of Microbial 2,3-Butanediol Production from Brewer's Spent Grain Modeled on Pinch Technology.

Microbial production of 2,3-butanediol (BDO) has received considerable attention as a promising alternate to fossil-derived BDO. In our previous work, BDO concentration >100 g/L was accumulated using brewer's spent grain (BSG) via microbial routes which was followed by techno-economic analysis of the bioprocess. In the present work, a life cycle assessment (LCA) was conducted for BDO production from the fermentation of BSG to identify the associated environmental impacts.

A review on the scope of remediating chlorinated paraffin contaminated water bodies and soils/sediments.

Chlorinated paraffins (CPs) involve a wide range of complex mixtures of chlorinated alkanes. The versatility of their physicochemical properties and their wide range of use has turned them into ubiquitous materials. This review covers the scope of remediating CP-contaminated water bodies and soil/sediments via thermal, photolytic, photocatalytic, nanoscale zero-valent iron (NZVI), microbial and plant-based remediation techniques.

Cigarettes butt littering: The story of the world's most littered item from the perspective of pollution, remedial actions, and policy measures.

Cigarettes butt (CB) is one of the most littered items on the planet. This paper critically analyzes the factors responsible for CB littering, and associated environmental ramifications, and reviews all the possible technical, behavioural, and policy-based solutions. Even while smoking has declined globally, middle-income nations have seen an increase in consumption, which may be related to increased affordability and a lack of public awareness.

Biochar-mediated removal of pharmaceutical compounds from aqueous matrices via adsorption.

Pharmaceutical is one of the noteworthy classes of emerging contaminants. These biologically active compounds pose a range of deleterious impacts on human health and the environment. This is attributed to their refractory behavior, poor biodegradability, and pseudopersistent nature.

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability.

Limitation in the availability of natural resources like water is the main drive for focussing on resource recovery from wastewater. Rapid urbanization with increased consumption of natural resources has severely affected its management and security. The application of biotechnological processes offers a feasible approach to concentrating and transforming wastewater for resource recovery and a step towards a circular economy.

Biochar admixture cement mortar fines for adsorptive removal of heavy metals in single and multimetal solution: Insights into the sorption mechanisms and environmental significance.

The combined action of biochar and C-S-H (calcium-silicate-hydrate) in the cement mortars as adsorbents was explored for treating heavy metals from water. The biochar admixture cement mortars were ground to fines for use as adsorbents with the rationale that combined action of Ca, Si, Al etc. based industrial waste with conventional adsorbent biochar could enhance the removal efficiency of contaminants and therefore the overarching aim was to study the removal capacity for three selected heavy metals (Pb Cu and Zn) commonly found in the aqueous waste stream.

A comparative life cycle assessment of different pyrolysis-pretreatment pathways of wood biomass for levoglucosan production.

In order to identify the most environmental-friendly pretreatment for pyrolsis of wood residue to levoglucosan (LG), for the first time a comparative life cycle assessment (LCA) was carried out for hot water treatment (HWT), torrefaction, acid pretreatment (AP) and salt pretreatment (SP) pathways. Since LG production can facilitate both resource recovery (RR) and wood residue handling (WRH), two different functional units (FUs), i.e.

Carbon material produced by hydrothermal carbonisation of food waste as an electrode material for supercapacitor application: A circular economy approach.

This study aims to use landfill leachate (LL) as an aqueous medium during hydrothermal carbonisation (HTC) of food waste to produce hydrochar (FWH-LL-C), which could be used as an electrode material in energy storage devices. The structural properties and electrochemical performance of the hydrochar were compared to that obtained using distilled water as a reaction medium (FWH-DW-C). The results showed that there is a difference in Brunauer-Emmett-Teller (BET) surface area of FWH-LL-C (220 m gm) and FWH-DW-C (319 m gm).

Study on the process wastewater reuse and valorisation during hydrothermal co-carbonization of food and yard waste.

The commercial success of hydrothermal carbonization (HTC) is contingent on seeking solutions for the downstream wastewater (process water) generated during the process which is still regarded largely as a nuisance. In the present study, the reusability and valorization strategy of process wastewater generated during co-HTC of organic fraction of municipal solid waste (food and yard waste) at 220 °C for 1 h was established. The process wastewater was anaerobically digested in the first part to determine its methane-generating capacity; and in the second part, it was recirculated up to five times to understand the evolution of physicochemical and fuel characteristics of hydrochar.

Seasonal characterization of municipal solid waste for selecting feasible waste treatment technology for Guwahati city, India.

As quantities and composition of municipal solid waste (MSW) vary significantly with seasons, a seasonal characterization study is critical for developing an efficient MSW management system. MSW was characterized in three different seasons for selecting an appropriate waste treatment and management strategy for Guwahati city. Results of the study shows that the major components of the MSW were organics (42.

Circular economy approach in solid waste management system to achieve UN-SDGs: Solutions for post-COVID recovery.

The COVID-19 pandemic and the ensuing socioeconomic crisis has impeded progress towards the UN Sustainable Development Goals (UN-SDGs). This paper investigates the impact of COVID 19 on the progress of the SDGs and provides insight into how green recovery stimulus, driven by circular economy (CE)-based solid waste management (SWM) could assist in attaining the intended targets of UN-SDG. It was understood in this review that the guiding principles of the UN-SDGs such as, public health, environmental concerns, resource value and economic development are similar to those that have driven the growth of waste management activities; thus, in order to achieve the goals of UN-SDG, a circular economy approach in solid waste management system should be prioritized in the post-COVID economic agenda.

Char from the co-pyrolysis of Eucalyptus wood and low-density polyethylene for use as high-quality fuel: Influence of process parameters.

Providing a valuable application to the under-utilized solid residue of co-pyrolysis of biomass and plastics could substantially improve economic and environmental sustainability of the process, thereby fostering circular economy. This study focuses on the variation of thermal and physiochemical characteristics of solid char, produced from the co-pyrolysis of waste low-density polyethylene (WLDPE) and Eucalyptus wood with varying pyrolysis temperatures from 300 to 550 °C, residence times of 90-150 min, and relative percentage of 33% and 25% (w/w) WLDPE in the feedstock. The highest values of yield (37%), energy density (1.