Preparation of bio-based flame retardants by modification of cottonseed meal with polyphosphate and boric acid and its durability to cotton fiber.

The durability and flame retardancy of cotton fabrics have been the focus of long-term research. In this paper, a method for preparing flame retardants through the direct modification of biomass was proposed, and the durable flame retardant of homologous cottonseed meal modified biomass flame retardants for cotton fabrics was achieved through biomass composition analysis and modeling. In this study, a cottonseed meal-phosphoric acid-boric acid synergistic bio-based flame retardant (CPB) was synthesized and characterized.

Precise Preparation of Size-Uniform Two-Dimensional Platelet Micelles Through Crystallization-Assisted Rapid Microphase Separation Using All-Bottlebrush-Type Block Copolymers with Crystalline Side Chains.

Polymer nanoparticles with low curvature, especially two-dimensional (2D) soft materials, are rich in functions and outstanding properties and have received extensive attention. Crystallization-driven self-assembly (CDSA) of linear semicrystalline block copolymers is currently a common method of constructing 2D platelets of uniform size. Although accompanied by high controllability, this CDSA method usually and inevitably requires a longer aging time and lower assembly concentration, limiting the large-scale preparation of nanoaggregates.

Effect of ambient O on respiratory mortality and synergies with meteorological factors in Shenyang, China.

The impact of O on the respiratory system is a significant global problem. Nevertheless, there is insufficient information about its impact on respiratory disorders in northeast China. In this study, we used a generalized additive model (GAM) to determine the correlation between O concentrations and respiratory deaths based on the daily meteorological data, pollutant concentrations, and respiratory deaths from 2014 to 2016 in Shenyang, a typical city in northeast China.

The multi-scale dissipation mechanism of composite solid electrolyte based on nanofiber elastomer for all-solid-state lithium metal batteries.

Developing next generation batteries necessitates a paradigm shift in the way to engineering solutions for materials challenges. In comparison to traditional organic liquid batteries, all-solid-state batteries exhibit some significant advantages such as high safety and energy density, yet solid electrolytes face challenges in responding dimensional changes of electrodes driven by mass transport. Herein, the critical mechanical parameters affecting battery cycling duration are evaluated based on Spearman rank correlation coefficient, decoupling them into strength, ductility, stiffness, toughness, elasticity, etc.

The highly hazardous veterinary drug "maduramicin" and its toxicokinetics in rats.

Background: Maduramicin (MAD) is an anticoccidial veterinary drug, but it frequently causes fatal poisonings in poultry, livestock, or humans. However, there is no specific antidote or guidance on first aid for MAD poisoning.

Aim: The aim of the present study is to evaluate the acute toxicity and toxicokinetics of MAD after oral exposure, so as to make a foundation for developing diagnostic and therapeutic protocols for human intoxication.

PEO-Based Solid-State Polymer Electrolytes for Wide-Temperature Solid-State Lithium Metal Batteries.

Developing solid-state lithium metal batteries with wide operating temperature range is important in future. Polyethylene oxide (PEO)-based solid-state electrolytes are extensively studied for merits including superior flexibility and low glass transition temperature. However, ideal usage temperatures for conventional PEO-based solid-state electrolytes are between 60 and 65 °C, and unequable temperature degrades their electrochemical performances at low and high temperatures (≤25 °C and ≥80 °C).

Molecular Chain Rearrangement of Natural Cellulose-Based Artificial Interphase for Ultra-Stable Zn Metal Anodes.

The unstable electrolyte-anode interface, plagued by parasitic side reactions and uncontrollable dendrite growth, severely hampers the practical implementation of aqueous zinc-ion batteries. To address these challenges, we developed a regenerated cellulose-based artificial interphase with synergistically optimized structure and surface chemistry on the Zn anode (RC@Zn), using a facile molecular chain rearrangement strategy. This RC interphase features a drastically increased amorphous region and more exposed active hydroxyl groups, facilitating rapid Zn diffusion and homogeneous Zn interface distribution, thereby enabling dendrite-free Zn deposition.

Polyimide-multiwalled carbon nanotubes composite as electrochemical sensing platform for the simultaneous detection of nitrophenol isomers.

Developing novel electrode materials plays a crucial role in enhancing the electrochemical sensing performance of chemically modified electrodes. This research presents a composite electrode material based on polyimide incorporated with multiwalled carbon nanotubes (PI-MWCNT) for the simultaneous detection of three nitrophenol isomers (NPs). First, the composite was prepared and characterized using microscopies, spectroscopic techniques, and electrochemical experiments.

Prepartion of low-cost blended lyocell fibres with phosphorus, nitrogen, halogen and inorganic flame retardants and study on their synergistic fame retardancy mechanism.

Cellulose is a kind of green and renewable materials, but its flammability limits its wide application. In order to enhance the flame retardancy of cellulose materials, herein, melamine cyanurate, decabromodiphenyl ethane, 1,2-Bis(2-oxo-5,5-dimethyl-1,3,2-dioxyphosphacyclohexyl-2-imino)ethane(BODIE) and montmorillonite were used as four typical flame retardants. These flame retardants were used alone or in combination to prepare several flame retardant lyocell fibres by physical blending method.

Yarn-Based Degradable Janus PPDO Fabric for Multifunctional Applications.

The growing high standard of people's wear has put forward requirements for fabrics, and multifunctional fabrics have been developed precisely in response to the requirements of the times. However, the incineration of waste fabrics produces a large amount of pollutants, resulting in a massive waste of resources and environmental pollution. Herein, the degradable nanofiber yarns (NYs) with self-cleaning properties were fabricated by in situ growth of SiO nanoparticles on the surface of the electrospun poly(-dioxanone) (PPDO) NYs using the Stöber method.

A Green and Efficient Electrocatalytic Route for the Highly-Selective Oxidation of C-H Bonds in Aromatics over 1D CoO-Based Nanoarrays.

Electrocatalytic oxidation of C-H bonds in hydrocarbons represents an efficient and sustainable strategy for the synthesis of value-added chemicals. Herein, a highly selective and continuous-flow electrochemical oxidation process of toluene to various oxygenated products (benzyl alcohol, benzaldehyde, and benzyl acetate) is developed with the electrocatalytic membrane electrodes (ECMEs). The selectivity of target products can be manipulated via surface and interface engineering of CoO-based electrocatalysts.

Copper dual-doping strategy of porous carbon nanofibers and nickel fluoride nanorods as bi-functional oxygen electrocatalysis for effective zinc-air batteries.

Designing and developing efficient, low-cost bi-functional oxygen electrocatalysts is essential for effective zinc-air batteries. In this study, we propose a copper dual-doping strategy, which involves doping both porous carbon nanofibers (PCNFs) and nickel fluoride nanoparticles with copper alone, successfully preparing copper-doped nickel fluoride (NiF) nanorods and copper nanoparticles co-modified PCNFs (Cu@NiF/Cu-PCNFs) as an efficient bi-functional oxygen electrocatalyst. When copper is doped into the PCNFs in the form of metallic nanoparticles, the doped elemental copper can improve the electronic conductivity of composite materials to accelerate electron conduction.

Progresses and Perspectives of Carbon-Free Metal Compounds-Modified Separators for High-Performance Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) have the advantages of high theoretical specific capacity, excellent energy density, abundant elemental sulfur reserves. However, the LSBs is mainly limited by shuttling of lithium polysulfides (LiPSs), slow reaction kinetics of sulfur cathode. For solving the above problems, by developing high-performance battery separators, the reversible capacity, Coulombic efficiency (CE) and cycle life of LSBs can be effectively enhanced.

Multifunctional Janus Membrane for Diabetic Wound Healing and Intelligent Monitoring.

The complex microenvironment of diabetic wounds often hinders the healing process, ultimately leading to the formation of diabetic foot ulcers and even death. Dual monitoring and treatment of wounds can significantly reduce the incidence of such cases. Herein, a multifunctional Janus membrane (3D chitosan sponge-ZE/polycaprolactone nanofibers-ZP) was developed by incorporating the zinc metal-organic framework, europium metal-organic framework, and phenol red into nanofibers for diabetic wound monitoring and treatment.

Characterization of air pollution and associated health risks in Gansu Province, China from 2015 to 2022.

Air pollution poses a major threat to both the environment and public health. The air quality index (AQI), aggregate AQI, new health risk-based air quality index (NHAQI), and NHAQI-WHO were employed to quantitatively evaluate the characterization of air pollution and the associated health risk in Gansu Province before (P-I) and after (P-II) COVID-19 pandemic. The results indicated that AQI system undervalued the comprehensive health risk impact of the six criteria pollutants compared with the other three indices.

Ag-thiolate interactions to enable an ultrasensitive and stretchable MXene strain sensor with high temporospatial resolution.

High-sensitivity strain sensing elements with a wide strain range, fast response, high stability, and small sensing areas are desirable for constructing strain sensor arrays with high temporospatial resolution. However, current strain sensors rely on crack-based conductive materials having an inherent tradeoff between their sensing area and performance. Here, we present a molecular-level crack modulation strategy in which we use layer-by-layer assembly to introduce strong, dynamic, and reversible coordination bonds in an MXene and silver nanowire-matrixed conductive film.

Review: Application of Bionic-Structured Materials in Solid-State Electrolytes for High-Performance Lithium Metal Batteries.

Solid-state lithium metal batteries (SSLMBs) have gained significant attention in energy storage research due to their high energy density and significantly improved safety. But there are still certain problems with lithium dendrite growth, interface stability, and room-temperature practicality. Nature continually inspires human development and intricate design strategies to achieve optimal structural applications.

Mushroom Poisoning Outbreaks - China, 2023.

What Is Already Known About This Topic?: Mushroom poisoning poses a significant food safety concern in China, with a total of 196 species identified in poisoning incidents by the end of 2022.

What Is Added By This Report?: In 2023, the China CDC conducted an investigation into 505 cases of mushroom poisoning spanning 24 provincial-level administrative divisions. This investigation resulted in 1,303 patients and 16 deaths, yielding a case fatality rate of 1.

Collagen/functionalized cellulose nanofibril composite aerogels with pH-responsive characteristics for drug delivery system.

In this work, carboxylated and amination modified cellulose nanofibrils (CNFs) were fabricated via the TEMPO catalytic oxidation system and diethylenetriamine, and collagen composite aerogels were fabricated through a simple self-assembly pretreatment and directional freeze-drying technology. Morphology analysis showed that the collagen composite aerogels had distinct layered-oriented double network structures after the self-assembly pretreatment. The intermolecular interactions between the collagen fibrils and functionalized CNFs (fCNFs) on the structures and properties of the composite aerogels were also examined through various characterization techniques.

Recent insights on the use of modified Zn-based catalysts in eCORR.

Converting CO into valuable chemicals can provide a new path to mitigate the greenhouse effect, achieving the aim of "carbon neutrality" and "carbon peaking". Among numerous electrocatalysts, Zn-based materials are widely distributed and cheap, making them one of the most promising electrocatalyst materials to replace noble metal catalysts. Moreover, the Zn metal itself has a certain selectivity for CO.