Organic photovoltaic cell with 17% efficiency and superior processability.

The development of organic photoactive materials, especially the newly emerging non-fullerene electron acceptors (NFAs), has enabled rapid progress in organic photovoltaic (OPV) cells in recent years. Although the power conversion efficiencies (PCEs) of the top-performance OPV cells have surpassed 16%, the devices are usually fabricated via a spin-coating method and are not suitable for large-area production. Here, we demonstrate that the fine-modification of the flexible side chains of NFAs can yield 17% PCE for OPV cells.

1 cm Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency.

Organic photovoltaic (OPV) technologies have the advantages of fabricating larger-area and light-weight solar panels on flexible substrates by low-cost roll-to-toll production. Recently, OPV cells have achieved many significant advances with power conversion efficiency (PCE) increasing rapidly. However, large-scale solar farms using OPV modules still face great challenges, such as device stability.

Eco-Compatible Solvent-Processed Organic Photovoltaic Cells with Over 16% Efficiency.

Recent advances in nonfullerene acceptors (NFAs) have enabled the rapid increase in power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells. However, this progress is achieved using highly toxic solvents, which are not suitable for the scalable large-area processing method, becoming one of the biggest factors hindering the mass production and commercial applications of OPVs. Therefore, it is of great importance to get good eco-compatible processability when designing efficient OPV materials.

Investigating the Trade-Off between Device Performance and Energy Loss in Nonfullerene Organic Solar Cells.

The large energy loss () in organic solar cells (OSCs) relative to those of silicon or inorganic/organic hybrid perovskite solar cells is one of the major factors limiting the power conversion efficiency (PCE) of OSCs. Recently, OSCs based on nonfullerene acceptors (NFAs) have achieved high PCEs at decreased values. Therefore, the present study investigates the relationship between and the device performance of NFA-based OSCs.

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference.

Although significant improvements have been achieved for organic photovoltaic cells (OPVs), the top-performing devices still show power conversion efficiencies far behind those of commercialized solar cells. One of the main reasons is the large driving force required for separating electron-hole pairs. Here, we demonstrate an efficiency of 14.

Achieving Over 15% Efficiency in Organic Photovoltaic Cells via Copolymer Design.

Ternary blending and copolymerization strategies have proven advantageous in boosting the photovoltaic performance of organic solar cells. Here, 15% efficiency solar cells using copolymerization donors are demonstrated, where the electron-withdrawing unit, ester-substituted thiophene, is incorporated into a PBDB-TF polymer to downshift the molecular energy and broaden the absorption. Copolymer-based solar cells suitable for large-area devices can be fabricated by a blade-coating method from a nonhalogen and nonaromatic solvent mixture.

Design rules for minimizing voltage losses in high-efficiency organic solar cells.

The open-circuit voltage of organic solar cells is usually lower than the values achieved in inorganic or perovskite photovoltaic devices with comparable bandgaps. Energy losses during charge separation at the donor-acceptor interface and non-radiative recombination are among the main causes of such voltage losses. Here we combine spectroscopic and quantum-chemistry approaches to identify key rules for minimizing voltage losses: (1) a low energy offset between donor and acceptor molecular states and (2) high photoluminescence yield of the low-gap material in the blend.

Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small-Molecule Acceptors.

To make organic solar cells (OSCs) more competitive in the diverse photovoltaic cell technologies, it is very important to demonstrate that OSCs can achieve very good efficiencies and that their cost can be reduced. Here, a pair of nonfullerene small-molecule acceptors, IT-2Cl and IT-4Cl, is designed and synthesized by introducing easy-synthesis chlorine substituents onto the indacenodithieno[3,2-b]thiophene units. The unique feature of the large dipole moment of the CCl bond enhances the intermolecular charge-transfer effect between the donor-acceptor structures, and thus expands the absorption and down shifts the molecular energy levels.

Demonstration of a microwave photonic synthetic aperture radar based on photonic-assisted signal generation and stretch processing.

A microwave photonic synthetic aperture radar (MWP SAR) is developed and experimentally demonstrated. In the transmitter, microwave photonic frequency doubling is used to generate a linearly-frequency-modulated (LFM) radar signal; while in the receiver, photonic stretch processing is employed to receive the reflection signal. The presented MWP SAR operates in Ku band with a bandwidth of 600MHz, and is evaluated through a series of inverse SAR imaging tests both in a microwave anechoic chamber and in a field trial.

Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell.

Fabricating organic solar cells (OSCs) with a tandem structure has been considered an effective method to overcome the limited light absorption spectra of organic photovoltaic materials. Currently, the most efficient tandem OSCs are fabricated by adopting fullerene derivatives as acceptors. In this work, we designed a new non-fullerene acceptor with an optical band gap (E) of 1.

Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open-Circuit Voltage.

A new acceptor-donor-acceptor-structured nonfullerene acceptor ITCC (3,9-bis(4-(1,1-dicyanomethylene)-3-methylene-2-oxo-cyclopenta[b]thiophen)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d':2,3-d']-s-indaceno[1,2-b:5,6-b']-dithiophene) is designed and synthesized via simple end-group modification. ITCC shows improved electron-transport properties and a high-lying lowest unoccupied molecular orbital level. A power conversion efficiency of 11.

Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra-Narrow Band Gap.

The design of narrow band gap (NBG) donors or acceptors and their application in organic solar cells (OSCs) are of great importance in the conversion of solar photons to electrons. Limited by the inevitable energy loss from the optical band gap of the photovoltaic material to the open-circuit voltage of the OSC device, the improvement of the power conversion efficiency (PCE) of NBG-based OSCs faces great challenges. A novel acceptor-donor-acceptor structured non-fullerene acceptor is reported with an ultra-narrow band gap of 1.