Preparation and Deep Characterization of Composite/Hybrid Multi-Scale and Multi-Domain Polymeric Microparticles.

Polymeric microparticles were produced following a three-step procedure involving (i) the production of an aqueous nanoemulsion of tri and monofunctional acrylate-based monomers droplets by an elongational-flow microemulsifier, (ii) the production of a nanosuspension upon the continuous-flow UV-initiated miniemulsion polymerization of the above nanoemulsion and (iii) the production of core-shell polymeric microparticles by means of a microfluidic capillaries-based double droplets generator; the core phase was composed of the above nanosuspension admixed with a water-soluble monomer and gold salt, the shell phase comprised a trifunctional monomer, diethylene glycol and a silver salt; both phases were photopolymerized on-the-fly upon droplet formation. Resulting microparticles were extensively analyzed by energy dispersive X-rays spectrometry and scanning electron microscopy to reveal the core-shell morphology, the presence of silver nanoparticles in the shell, organic nanoparticles in the core but failed to reveal the presence of the gold nanoparticles in the core presumably due to their too small size (c.a.

A new formulation of poly(MAOTIB) nanoparticles as an efficient contrast agent for in vivo X-ray imaging.

Unlabelled: Polymeric nanoparticles (PNPs) are gaining increasing importance as nanocarriers or contrasting material for preclinical diagnosis by micro-CT scanner. Here, we investigated a straightforward approach to produce a biocompatible, radiopaque, and stable polymer-based nanoparticle contrast agent, which was evaluated on mice. To this end, we used a nanoprecipitation dropping technique to obtain PEGylated PNPs from a preformed iodinated homopolymer, poly(MAOTIB), synthesized by radical polymerization of 2-methacryloyloxyethyl(2,3,5-triiodobenzoate) monomer (MAOTIB).

Multiscale materials from microcontinuous-flow synthesis: ZnO and Au nanoparticle-filled uniform and homogeneous polymer microbeads.

Tri(propylene glycol) diacrylate (TPGDA) was found to be an excellent monomer for the stabilization and dispersion of inorganic nanoparticles. Uniform nano-Au/poly(TPGDA) and nano-ZnO/poly(TPGDA) composite microbeads were synthesized in situ using a designed axisymmetric capillary-based flow-focusing microfluidic device without any additional surfactant or coupling agent. Using the designed mixing-enhanced microfluidic device, homogeneous nano-inorganic/polymer composites with a high content of nanoparticles were obtained.

Co-axial capillaries microfluidic device for synthesizing size- and morphology-controlled polymer core-polymer shell particles.

An easy assembling-disassembling co-axial capillaries microfluidic device was built up for the production of double droplets. Uniform polymer core-polymer shell particles were synthesized by polymerizing the two immiscible monomer phases composing the double droplet. Thus poly(acrylamide) core-poly(tri(propylene glycol) diacrylate) shell particles with controlled core diameter and shell thickness were simply obtained by adjusting operating parameters.

Preparation, structural characterization, and thermomechanical properties of poly(methyl methacrylate)/organoclay nanocomposites by melt intercalation.

Poly(methyl methacrylate) (PMMA) based nanocomposites were synthesized by melt intercalation technique using organoclays (Cloisite 30B and Cloisite 20A) as fillers. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to determine the dispersion and the morphology of the nanocomposites obtained. Thermomechanical tests including tensile test and dynamic mechanical analysis (DMA) were used to evaluate the Young's modulus, storage modulus and the glass transition temperature.

A predictive approach of the influence of the operating parameters on the size of polymer particles synthesized in a simplified microfluidic system.

Monodisperse and size-controlled spherical polymer particles were synthesized by in situ photopolymerization of O/W monomer emulsions. Monomer droplets were produced without surfactant or pretreatment at a needle tip in a simplified axisymmetric microfluidic device. The effect of the viscosity of the continuous phase on the particle size was studied.