Large-volume sample stacking for on-capillary sample enrichment in the determination of naphthalene- and benzenesulfonates in real water samples by capillary zone electrophoresis.

We investigated the on-line preconcentration of a test mixture of 15 substituted and unsubstituted naphthalene(NSs) and benzenesulfonates (BZSs) by large-volume sample stacking (LVSS). Analyses were carried out by capillary zone electrophoresis (CZE) with on-column UV detection. In particular, we focused on how experimental variables such as the inside diameter of the capillary, the volume of sample introduced and polarity switching influenced the enrichment procedure.

Comparison of different fibers for the solid-phase microextraction of phthalate esters from water.

Solid-phase microextraction (SPME) coupled to gas chromatography-mass spectrometry (GC-MS) has been applied to determine six phthalate esters and one adipate ester in water. The SPME parameters were optimized for several commercially available fibers. A 65-microm polydimethylsiloxane-divinylbenzene (PDMS-DVB) was the fiber selected and was applied to analysis of water from the Ebro river and the industrial port of Tarragona.

Occurrence of antifouling biocides in the Spanish Mediterranean marine environment.

A compilation of the results of a monitoring program of the recently used antifouling pesticides diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea), Irgarol 1051 (2-methylthio-4-tertiary-butylamino-6-cyclopropylamino-s-teiazine), seanine 211 (4,5-dichloro-2-n-octyl-4-isothazolin-3-one), chlorothalonil (2,4,5,6-tetrachloro-isophthalonitrile), dichlofluanid (N'-dimethyl-N-phenylsulphanamide), TCMTB ((2-thiocyanomethylthio) benzothiazole), and three degradation products demethyldiuron (3-(3,4-dichlorophenyl)-1-methylurea),3,4-dichlorophenylurea and 2-methylthio-4-tert-butylamino-s-triazine (Irgarol degradation product) that was carried out between April 1996 and February 2000 in enclosed seawaters from Catalonia and Almería (Spanish Mediterranean coast) is reported. Nine points were sampled along the Catalan coast: Barcelona Olympic port, Masnou, Blanes, Sant Carles de la Ràpita, Tarragona, Cambrils and Salou marinas as well as the Cambrils and Tarragona fishing harbors and in marinas and ports from Almeria: Aguadulce port, Almería port, Almerimar fishing harbour and Almerimar marina. The analytical methodologies were based on Solid Phase Extraction followed by liquid chromatography (LC) or gas chromatography (GC) coupled to a mass spectrometry (MS) or -Diode Array Detector.

Monitoring of antifouling agents in water samples by on-line solid-phase extraction-liquid chromatography-atmospheric pressure chemical ionization mass spectrometry.

An automatic method for determining diuron, irgarol 1051, folpet and dichlofluanid in seawater samples have been developed. This method is based on the on-line coupling of solid-phase extraction (SPE) with a highly crosslinked polymeric sorbent, LiChrolut EN, to liquid chromatography followed by atmospheric pressure chemical ionization (APCI) and mass spectrometry. The operational parameters affecting the APCI interface have been studied in both positive and negative ionization modes.

Comparative study of capillary zone electrophoresis and micellar electrokinetic capillary chromatography for the separation of naphthalenedisulfonate isomers.

We investigated the separation of a test mixture of nine substituted and unsubstituted naphthalenedisulfonate isomers by capillary electrophoresis with a UV diode array detector. In particular, we focused on how the composition of the running buffer affected the separation selectivity. When capillary zone electrophoresis was carried out, the best results were obtained when organic solvents such as ethanol or propan-2-ol were added.

Solid-phase extraction coupling to capillary electrophoresis with emphasis on environmental analysis.

This article reviews the status of solid-phase extraction (SPE) coupled with capillary electrophoresis (CE). It focuses on some of the organic pollutants which have captured the interest of analytical chemists--phenols, surfactants, dyes, polynuclear aromatic hydrocarbons (PAHs), aromatic and aliphatic amines, aromatic acids and aromatic sulfonic acids--and, in particular, on monitoring pesticides from different sources. It shows that the coupling of SPE to CE has considerable potential in the analysis of environmental pollutants.

Determination of naphthalenesulfonates in water by on-line ion-pair solid-phase extraction and ion-pair liquid chromatography with fast-scanning fluorescence detection.

A fast analytical method for quantifying a mixture of 12 naphthalenesulfonates and naphthalenedisulfonates has been developed. This method consists of on-line ion-pair solid-phase extraction with PLRP-s sorbent and ion-pair liquid-chromatography using fast-scanning fluorescence spectrometer as a detection system and multivariate calibration. As complete separation is unnecessary, the compounds were analysed in isocratic conditions and the chromatographic analysis took only 25 min.

Synthesis and evaluation of a molecularly imprinted polymer for selective on-line solid-phase extraction of 4-nitrophenol from environmental water.

A molecularly imprinted polymer (MIP) able to bind 4-nitrophenol (4-NP) was prepared using noncovalent molecular imprinting methods and evaluated as a selective sorbent in molecularly imprinted solid-phase extraction (MISPE) on-line coupled to a reversed-phase HPLC. It has been shown that the conditions chosen for washing the MIP and for eluting the analyte in the MISPE process are extremely important for ensuring good selectivity and recovery. River water samples, spiked with the 11 Environmental Protection Agency phenolic compounds at microgram per liter levels, were preconcentrated on-line using this MIP, and 4-NP was selectively extracted.

Trace determination of antifouling compounds by on-line solid-phase extraction-gas chromatography-mass spectrometry.

A new method based on solid-phase extraction (SPE) on-line coupled to gas chromatography-mass spectrometry through an on-column interface has been applied to determine three antifouling compounds in water samples. Parameters affecting the SPE process and transfer step have been optimised and the method developed has been applied to the analysis of marinas, fishing ports and Ebro river water. The method allows the analytes to be detected at 0.

Solid-phase extraction of polycyclic aromatic compounds.

Solid-phase extraction (SPE) for two groups of polyaromatic compounds--polycyclic aromatic hydrocarbons and naphthalenesulfonates--with completely different problems in the extraction process are reviewed. The sorbents used in each case and the different steps of SPE are studied. Particular problems encountered in the SPE of each group are described.

Determination of quinolones in plasma samples by capillary electrophoresis using solid-phase extraction.

The potential of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) have been investigated for the separation and quantitative determination of 10 quinolone antibiotics. The influence of different conditions, such as the buffer and pH of the electrolyte, the surfactant and the ion-pairing agents added to the electrolyte and the organic modifier were studied. A buffer consisting of 40 mM sodium tetraborate at pH 8.

Determination of phthalate esters in water samples by solid-phase microextraction and gas chromatography with mass spectrometric detection.

Solid-phase microextraction (SPME) with an 85 microm polyacrylate fiber, coupled to gas chromatography-mass spectrometry was used to determine six phthalate esters and bis(2-ethylhexyl) adipate in water samples. The variables affecting the SPME absorption process were optimized and the method developed was applied to analyze both tap and commercial mineral water samples as well as water from the Ebro river and fishing and industrial ports. For real samples, the linear range in full scan acquisition mode was between 0.

Determination of amoxicillin in plasma samples by capillary electrophoresis.

We have developed a capillary zone electrophoresis (CZE) method for determining amoxicillin in animal plasma samples. Sample clean-up involved solid-phase extraction onto Sep-Pak C18 cartridges followed by elution with water-methanol (85:15). This paper describes two different techniques to increase the sensitivity of the CZE method: field-amplified sample injection (FASI) and electrokinetic injection.

On-line solid-phase extraction-ion-pair liquid chromatography-electrospray mass spectrometry for the trace determination of naphthalene monosulphonates in water.

This paper presents an HPLC-MS method for the fully automated determination of a group of naphthalene monosulphonates in environmental water samples. The analytical procedure consisted of on-line ion-pair solid-phase extraction using a PLRP-S precolumn and ion-pair LC separation with triethylamine as ion-pair reagent in both cases. A mass spectrometric detector, coupled to LC through an electrospray interface and operated in negative ion mode, was used.

Optimization of solid-phase microextraction conditions using a response surface methodology to determine organochlorine pesticides in water by gas chromatography and electron-capture detection.

A response surface methodology was applied to optimise the solid-phase microextraction (SPME) conditions using a polyacrylate-coated fiber to determine thirteen organochlorine pesticides from water. Analyses were performed using gas chromatography-electron-capture detection. Variables affecting absorption in both the headspace and immersion extraction were optimised by using a response surface generated with a Doehlert design, and the results were compared.

Solid-phase microextraction of the antifouling Irgarol 1051 and the fungicides dichlofluanid and 4-chloro-3-methylphenol in water samples.

Three pesticides usually added to paint formulations, Irgarol 1051, dichlofluanid and 4-chloro-3-methylphenol, were determined by solid-phase microextraction (SPME) with 85-micron polyacrylate fibers and gas chromatography-mass spectrometry. The parameters affecting the SPME process (the pH, the addition of salt to the sample, and the time and temperature of the absorption step) were optimized. The method developed was applied to the analysis of water samples from Ebro river, marinas and fishing ports.

Evaluation of different electrolyte systems and on-line preconcentrations for the analysis of haloacetic acids by capillary zone electrophoresis.

This study compares the sodium chromate, potassium hydrogenphthalate, 2,6-naphthalenedicarboxylic acid dipotassium and sodium tetraborate electrolyte systems, for determining haloacetic acids using capillary zone electrophoresis with and without modified electroosmotic flow. In order to detect low concentrations of these compounds, an on-line preconcentration step was carried out. Results were good when standard solutions were analysed, but when the method was applied to real samples, the sample had to be pretreated to decrease the interference of the matrix.

Comparative study of a solid-phase extraction system coupled to capillary electrophoresis in the determination of haloacetic compounds in tap water.

This study compares four different commercial sorbents, LC-SAX (a quaternary ammonium anion exchanger), LiChrolut EN (a highly crosslinked styrene-divinylbenzene), Envi-Carb (a graphitized carbon black) and Oasis HLB [a macroporous poly(divinylbenzene-co-N-vinylpyrrolidone) copolymer], for the solid-phase extraction (SPE) of various haloacetic compounds from aqueous samples. The recoveries with the different sorbents were studied by coupling an off-line SPE system to capillary electrophoresis with indirect photometric detection. The recoveries were highest when LiChrolut EN was used.

On-line coupling of solid-phase extraction to gas chromatography with mass spectrometric detection to determine pesticides in water.

A group of pesticides with different chemical structures was determined in water by on-line coupling of solid-phase extraction to gas chromatography with mass spectrometric detection through an on-column interface. A 10 mm x 2 mm I.D.

Capillary zone electrophoresis with indirect UV detection of haloacetic acids in water.

A capillary zone electrophoresis (CZE) system for determining haloacetic acids in water was optimized with indirect photometric detection. Two different carrier electrolytes, potassium hydrogenphthalate and sodium 2,6-naphthalenedicarboxylate, were evaluated in terms of sensitivity and two different electroosmotic flow modifiers, tetradecyltrimethylammonium bromide and hexadecyltrimethylammonium bromide, were tested. Parameters such as electrolyte concentration and pH, and the concentration of the electroosmotic flow modifiers, which affect the CZE separations, were investigated.

Identification of pesticides by liquid chromatography--particle beam mass spectrometry using electron ionization and chemical ionization.

Liquid chromatography-mass spectrometry (LC-MS) with a particle beam (PB) interface is used to separate and identify a group of pesticides. The mass spectra obtained under the different ionization modes, electron ionization (EI) and positive and negative chemical ionization (PCI and NCI) are compared. The operating conditions under each mode, determined by studying the influence on the ion abundance of the ion source temperature of the EI mode, and the gas pressure and ion source temperature in the methane CI were optimized.

New chemically modified polymeric resin for solid-phase extraction of pesticides and phenolic compounds from water.

A new chemically modified polymeric resin, with an o-carboxybenzoyl moiety, is developed to be used in the on-line solid-phase extraction (SPE) of some pesticides and phenolic compounds from aqueous samples, in order to obtain better breakthrough volumes than other commercial sorbents. The chemical introduction of this moiety improves the efficiency of SPE by providing better surface contact with aqueous samples. This synthesized sorbent enables higher volumes of sample to be concentrated for determining polar compounds.

Determination of polycyclic aromatic hydrocarbons in waters by use of supercritical fluid chromatography coupled on-line to solid-phase extraction with disks.

The potential of supercritical fluid chromatography (SFC) coupled on-line to solid-phase extraction (SPE) with disks for determining sixteen different polycyclic aromatic hydrocarbons (PAHs) was assessed. A preliminary study of the chromatographic separation was conducted that led to the use of SPE coupled to SFC for improved detection limits. Disks of two different materials, i.

Solid-phase extraction of phenols and pesticides in water with a modified polymeric resin.

A comparative study of a chemically modified polymeric resin which has a benzoyl group and several commercial sorbents, such as PLRP-S, Envi-chrom P and LIChrolut EN, for the solid-phase extraction of various phenolic compounds and pesticides was carried out. Selectivity and breakthrough volumes for these compounds with different sorbents were studied by coupling an on-line solid-phase extraction system with a modified liquid chromatograph equipped with a UV detector. After determining the chromatographic conditions, linearity range and detection limits, the method was applied to the determination of these compounds in drinking and surface water.

On-line solid-phase extraction coupled to supercritical fluid chromatography to determine phenol and nitrophenols in water.

Determining of phenol and nitrophenols using solid-phase extraction on-line coupled to supercritical fluid chromatography (SFC) is studied. SFC quickly separated the compounds studied, in less than 6 min, and solid-phase extraction was used to decrease the limits of detection. C18, PLRP-S and a highly cross-linked styrene-divinylbenzene copolymer in a 10 x 3 mm I.