High frequency modulation and (quasi) single-sideband emission of mid-infrared ring and ridge quantum cascade lasers.

We investigate the high frequency modulation characteristics of mid-infrared surface-emitting ring and edge-emitting ridge quantum cascade lasers (QCLs). In particular, a detailed comparison between circular ring devices and ridge-QCLs from the same laser material, which have a linear waveguide in a "Fabry-Pérot (FP) type" cavity, reveals distinct similarities and differences. Both device types are single-mode emitting, based on either 2 - (ring-QCL) or 1 -order (ridge-QCL) distributed feedback (DFB) gratings with an emission wavelength around 7.

Electro-optic THz dual-comb architecture for high-resolution, absolute spectroscopy.

An absolute-frequency terahertz (THz) dual-frequency comb spectrometer based on electro-optic modulators for tunable, high-resolution, and real-time rapid acquisition is presented. An optical line of a master frequency comb (filtered via optical injection locking) serves as the seed to electro-optically generate a pair of new frequency combs (probe and local oscillator). Photomixing both combs with another coherent line from the same original master comb generates a narrow linewidth THz dual-comb with teeth frequencies that can be referenced to a radio-frequency standard.

Frequency accurate coherent electro-optic dual-comb spectroscopy in real-time.

Electro-optic dual-comb spectrometers have proved to be a promising technology for sensitive, high-resolution and rapid spectral measurements. Electro-optic combs possess very attractive features like simplicity, reliability, bright optical teeth, and typically moderate but quickly tunable optical spans. Furthermore, in a dual-comb arrangement, narrowband electro-optic combs are generated with a level of mutual coherence that is sufficiently high to enable optical multiheterodyning without inter-comb stabilization or signal processing systems.

Laser range finder approach based on a fieldable electro-optic dual optical frequency comb: a proof of concept.

In this paper a new laser range finder approach is presented. It is based on a fan of beams of different optical frequencies that are projected to the target. The detected back-reflected beams contain frequency-encoded information about its reflection angles, which are used for the calculation of the range by means of triangulation methods.

Gain-switching injection-locked dual optical frequency combs: characterization and optimization.

In this work, the generation of dual optical frequency combs based on gain-switching and optical injection locking is experimentally examined. The study reveals that an effective process of optical injection can lead to optimized RF combs in terms of span and signal-to-noise ratio. The system also minimizes the overlap of lines and reduces the number of optical components involved, eliminating the need for any external modulator (electro-optic, acousto-optic).

Dual optical frequency comb architecture with capabilities from visible to mid-infrared.

In this paper, a new approach to dual comb generation based on well-known optical techniques (Gain-Switching and Optical Injection Locking) is presented. The architecture can be implemented using virtually every kind of continuous-wave semiconductor laser source (DFB, VCSEL, QCL) and without the necessity of electro-optic modulators. This way, a frequency-agile and adaptive dual-comb architecture is provided with potential implementation capabilities from mid-infrared to near ultraviolet.

Dual electro-optic optical frequency combs for multiheterodyne molecular dispersion spectroscopy.

In this paper, a multiheterodyne architecture for molecular dispersion spectroscopy based on a coherent dual-comb source generated using a single continuous wave laser and electro-optic modulators is presented and validated. The phase-sensitive scheme greatly simplifies previous dual-comb implementations by the use of an electro-optic dual comb and by phase-locking all the signal generators of the setup eliminating, in this way, the necessity of any reference optical path currently mandatory in absorption-based instruments. The architecture is immune to the classical baseline and normalization problems of absorption-based analyzers and provides an output linearly dependent on the gas concentration.

Heterodyne architecture for tunable laser chirped dispersion spectroscopy using optical processing.

Dispersion-based spectroscopic techniques present many desirable features when compared with classical absorption spectroscopy implementations, such as the normalization-free operation and the extended dynamic range. In this Letter, we present a new sensor design based on direct optical processing for heterodyne conversion in tunable laser chirped dispersion spectroscopy that allows sensor implementations using low-speed photodetectors and low-cost FM demodulators. The performance of the new setup has been validated using as a target the ro-vibrational transition of methane at approximately 1650.